3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownINA183A2IDBVR
Texas Instruments · Current Sense Amplifiers · SOT-23-5
INA183A2IDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Analog device ground; both GND pins (1 and 2) must be connected to ground. |
| 2 | GND | power_in | Analog device ground; both GND pins (1 and 2) must be connected to ground. |
| 3 | OUT | output | Voltage output, which the datasheet limits to between GND - 0.3 V and (IN+) + 0.3 V in absolute maximum ratings. |
| 4 | IN- | input | Analog input to be connected to the load side of the shunt resistor; the device withstands up to 26 V on this pin regardless of whether power is applied. |
| 5 | IN+ | input | Analog input to be connected to the supply side of the shunt resistor; it also powers the device, with a supply range of 2.7 V to 26 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOT-23-5 |
| Category | Amplifiers/Comparators |
| Pins | 5 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Common-mode input range | VCM | 2.7 | 26 | V | TA = -40 °C to +125 °C | 5 | |
| Common-mode rejection ratio | CMRR | 100 | 120 | dB | VIN+ = 2.7 V to 26 V, VSENSE = 10 mV, TA = -40 °C to +125 °C | 5 | |
| Offset voltage, RTI | VOS | -170 | 25 | 170 | μV | VCM = 12 V | 5 |
| RTI vs temperature | dVOS/dT | 0.1 | 0.5 | μV/°C | TA = -40 °C to +125 °C | 5 | |
| Input bias current (IB-) | IIB | 30 | 40 | μA | VSENSE = 0 mV | 5 | |
| Gain (A2 devices) | G | 100 | V/V | A2 devices | 5 | ||
| Gain error | EG | -0.4 | 0.1 | 0.4 | % | VOUT = 0.5 V to VIN+, 0.5 V, TA = -40 °C to +125 °C | 5 |
| Gain error vs temperature | 3 | 10 | ppm/°C | TA = -40 °C to +125 °C | 5 | ||
| Nonlinearity error | -0.01 | 0.01 | % | VOUT = 0.5 V to VIN+, 0.5 V | 5 | ||
| Maximum capacitive load | 1 | nF | No sustained oscillation | 5 | |||
| Bandwidth (A2 devices) | BW | 30 | kHz | CLOAD = 10 pF | 5 | ||
| Slew rate | SR | 0.4 | V/μs | 5 | |||
| Voltage noise density | 25 | nV/√Hz | 5 | ||||
| Quiescent current, (IN+) | IQ | 83 | 130 | μA | VSENSE = 0 mV | 5 | |
| Quiescent current over temperature | IQ | 140 | μA | TA = -40 °C to +125 °C | 5 | ||
| Supply voltage range, voltage at IN+ pin | VS | 2.7 | 12 | 26 | V | 4 | |
| Operating free-air temperature | TA | -40 | 125 | °C | 4 | ||
| Analog inputs differential (VIN+), (VIN-) | -0.3 | 26 | V | Relative to GND | 4 | ||
| Analog inputs common-mode | -0.3 | 26 | V | Relative to GND | 4 | ||
| Operating temperature | -55 | 150 | °C | 4 | |||
| Junction temperature | 150 | °C | 4 | ||||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Junction-to-ambient thermal resistance | RθJA | 164.2 | °C/W | DBV (SOT-23) 5 pins | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 60.1 | °C/W | DBV (SOT-23) 5 pins | 4 | ||
| Junction-to-board thermal resistance | RθJB | 36.6 | °C/W | DBV (SOT-23) 5 pins | 4 | ||
| Junction-to-top characterization parameter | ψJT | 10.3 | °C/W | DBV (SOT-23) 5 pins | 4 | ||
| Junction-to-board characterization parameter | ψJB | 36.3 | °C/W | DBV (SOT-23) 5 pins | 4 |
CAD (KiCad official)
- Symbol:
INA183A2IDBVR - Footprint:
Package_TO_SOT_SMD:SOT-23-5 - 3D model: SOT-23-5 (KiCad packages3D, STEP)
- 3D model files:
ina183a2idbvr-etched.step/ina183a2idbvr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ina183a2idbvr.step/ina183a2idbvr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (24 pp, sha256
a2cbd211aaec4178, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).