Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

INA183A2IDBVR

Texas Instruments · Current Sense Amplifiers · SOT-23-5

INA183A2IDBVR from Texas Instruments, in a SOT-23-5. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Analog device ground; both GND pins (1 and 2) must be connected to ground.
2 GND power_in Analog device ground; both GND pins (1 and 2) must be connected to ground.
3 OUT output Voltage output, which the datasheet limits to between GND - 0.3 V and (IN+) + 0.3 V in absolute maximum ratings.
4 IN- input Analog input to be connected to the load side of the shunt resistor; the device withstands up to 26 V on this pin regardless of whether power is applied.
5 IN+ input Analog input to be connected to the supply side of the shunt resistor; it also powers the device, with a supply range of 2.7 V to 26 V.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOT-23-5
Category Amplifiers/Comparators
Pins 5

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Common-mode input range VCM 2.7 26 V TA = -40 °C to +125 °C 5
Common-mode rejection ratio CMRR 100 120 dB VIN+ = 2.7 V to 26 V, VSENSE = 10 mV, TA = -40 °C to +125 °C 5
Offset voltage, RTI VOS -170 25 170 μV VCM = 12 V 5
RTI vs temperature dVOS/dT 0.1 0.5 μV/°C TA = -40 °C to +125 °C 5
Input bias current (IB-) IIB 30 40 μA VSENSE = 0 mV 5
Gain (A2 devices) G 100 V/V A2 devices 5
Gain error EG -0.4 0.1 0.4 % VOUT = 0.5 V to VIN+, 0.5 V, TA = -40 °C to +125 °C 5
Gain error vs temperature 3 10 ppm/°C TA = -40 °C to +125 °C 5
Nonlinearity error -0.01 0.01 % VOUT = 0.5 V to VIN+, 0.5 V 5
Maximum capacitive load 1 nF No sustained oscillation 5
Bandwidth (A2 devices) BW 30 kHz CLOAD = 10 pF 5
Slew rate SR 0.4 V/μs 5
Voltage noise density 25 nV/√Hz 5
Quiescent current, (IN+) IQ 83 130 μA VSENSE = 0 mV 5
Quiescent current over temperature IQ 140 μA TA = -40 °C to +125 °C 5
Supply voltage range, voltage at IN+ pin VS 2.7 12 26 V 4
Operating free-air temperature TA -40 125 °C 4
Analog inputs differential (VIN+), (VIN-) -0.3 26 V Relative to GND 4
Analog inputs common-mode -0.3 26 V Relative to GND 4
Operating temperature -55 150 °C 4
Junction temperature 150 °C 4
Storage temperature Tstg -65 150 °C 4
Junction-to-ambient thermal resistance RθJA 164.2 °C/W DBV (SOT-23) 5 pins 4
Junction-to-case (top) thermal resistance RθJC(top) 60.1 °C/W DBV (SOT-23) 5 pins 4
Junction-to-board thermal resistance RθJB 36.6 °C/W DBV (SOT-23) 5 pins 4
Junction-to-top characterization parameter ψJT 10.3 °C/W DBV (SOT-23) 5 pins 4
Junction-to-board characterization parameter ψJB 36.3 °C/W DBV (SOT-23) 5 pins 4

CAD (KiCad official)

  • Symbol: INA183A2IDBVR
  • Footprint: Package_TO_SOT_SMD:SOT-23-5
  • 3D model: SOT-23-5 (KiCad packages3D, STEP)
  • 3D model files: ina183a2idbvr-etched.step / ina183a2idbvr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ina183a2idbvr.step / ina183a2idbvr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (24 pp, sha256 a2cbd211aaec4178, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF