3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownOB5222AG
OB(On-Bright Elec) · AC-DC Controllers & Regulators · DIP-8
OB5222AG from OB(On-Bright Elec), in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | CS | input | Current sense input with leading edge blanking, and the current limiting threshold is 0.72 to 0.78 V at zero duty cycle. |
| 2 | FB | input | Feedback input whose voltage together with the CS signal sets the PWM duty cycle, with a power limit debounce time TD_PL of 80 to 96 ms. |
| 3 | GND | power_in | Ground reference pin for the device. |
| 4 | VDD | power_in | Power supply pin with a recommended operating range of 10.5 to 23.5 V and a zener clamp of 32 V typical. |
| 5 | HV | power_in | Connected to the line input or bulk capacitor via resistors for startup, with about 51 kΩ typical recommended in the high voltage path to limit current. |
| 6 | NC | unconnected | Marked NC in the pin configuration diagram; the datasheet gives no function or rating for this pin. |
| 7 | Drain | output | HV MOSFET drain pin connected to the primary lead of the transformer, with a drain-source breakdown voltage BVdss of 600 V. |
| 8 | Drain | output | HV MOSFET drain pin connected to the primary lead of the transformer, with a drain-source breakdown voltage BVdss of 600 V. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | OB(On-Bright Elec) |
| Package | DIP-8 |
| Category | Power Supply Chip |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD Supply Voltage | VDD | 10.5 | 23.5 | V | 2 | ||
| Operating Ambient Temperature | TA | -20 | 85 | ℃ | 2 | ||
| High-Voltage Pin, HV | HV | -0.3 | 500 | V | 2 | ||
| VDD DC Supply Voltage | VDD | -0.3 | 30 | V | 2 | ||
| FB Input Voltage | FB | -0.3 | 7 | V | 2 | ||
| CS Input Voltage | CS | -0.3 | 7 | V | 2 | ||
| VDD DC Clamp Current | 10 | mA | 2 | ||||
| Operating Junction Temperature | TJ | -40 | 150 | ℃ | 2 | ||
| Storage Temperature | Tstg | -55 | 150 | ℃ | 2 | ||
| Lead Temperature | 260 | ℃ | Soldering, 10 secs | 2 | |||
| Thermal resistance junction to ambient, DIP8 | RJA | 75 | ℃/W | DIP8 | 2 | ||
| Frequency jittering | Δf_OSC | -8 | 8 | % | 6 | ||
| Max duty cycle | 75 | 80 | 85 | % | Max duty cycle @ VDD=18V,VFB=3V,VCS=0.3V | 5 | |
| Vdd_clamp | Vdd_clamp | 30 | 32 | 34 | V | Ivdd=10mA | 5 |
| UVLO(ON) VDD Under Voltage Lockout Enter | UVLO(ON) | 8.3 | 9.3 | 10.3 | V | 5 | |
| UVLO(OFF) VDD Under Voltage Lockout Exit (Recovery) | UVLO(OFF) | 14.3 | 15.3 | 16.3 | V | 5 | |
| OVP(ON) Over voltage protection voltage | OVP(ON) | 24 | 26 | 28 | V | FB=3V, Ramp up VDD until gate clock is off | 5 |
| IHV Supply current from HV pin | IHV | 1 | 2.8 | 5 | mA | VDD=2V, HV=100V | 5 |
| HV pin leakage current after startup | 10 | uA | VDD=18V, HV=500V | 5 | |||
| VDD Start up Current | Istartup | 5 | 20 | uA | VDD=UVLO(OFF)-1V, measure leakage current into VDD | 5 | |
| Operation Current | I_VDD_Operation | 2 | 2.5 | mA | VFB=3V | 5 | |
| Burst Mode Current | 0.8 | 1 | mA | VDD=15V, VFB=1V | 5 | ||
| VFB Open Loop Voltage | VFB_Open | 3.9 | 5 | V | 5 | ||
| Power limiting Debounce Time | TD_PL | 80 | 88 | 96 | mSec | 5 | |
| Current Limiting Threshold Voltage | VTH_OC | 0.72 | 0.75 | 0.78 | V | 5 | |
| Normal Oscillation Frequency | FOSC | 60 | 65 | 70 | KHZ | FB=3V | 6 |
| Static drain-source on resistance | Rdson | 4.4 | 5.5 | Ω | Static, Id=1.0A | 6 |
CAD (KiCad official)
- Symbol:
OB5222AG - Footprint:
Package_DIP:DIP-8_W7.62mm - 3D model: DIP-8 (KiCad packages3D, STEP)
- 3D model files:
ob5222ag-etched.step/ob5222ag-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ob5222ag.step/ob5222ag.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: OB(On-Bright Elec) datasheet (11 pp, sha256
59812ecb983780d4, retrieved 2026-11-02, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).