main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers ob5222ag: viewers · Ray
ob5222ag-etched.glb Publish 0.1.0 · Ray
ob5222ag-etched.step ob5222ag: factory component page (tier=lcsc) · Ray
ob5222ag-hero.glb ob5222ag: hero GLB from the etched model (keeps the MPN mark) · Ray
ob5222ag-hero.overlay.json Publish 0.1.0 · Ray
ob5222ag.glb Publish 0.1.0 · Ray
ob5222ag.kicad_mod Publish 0.1.0 · Ray
ob5222ag.kicad_sym Publish 0.1.0 · Ray
ob5222ag.lbr Publish 0.1.0 · Ray
ob5222ag.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

OB5222AG

OB(On-Bright Elec) · AC-DC Controllers & Regulators · DIP-8

OB5222AG from OB(On-Bright Elec), in a DIP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 CS input Current sense input with leading edge blanking, and the current limiting threshold is 0.72 to 0.78 V at zero duty cycle.
2 FB input Feedback input whose voltage together with the CS signal sets the PWM duty cycle, with a power limit debounce time TD_PL of 80 to 96 ms.
3 GND power_in Ground reference pin for the device.
4 VDD power_in Power supply pin with a recommended operating range of 10.5 to 23.5 V and a zener clamp of 32 V typical.
5 HV power_in Connected to the line input or bulk capacitor via resistors for startup, with about 51 kΩ typical recommended in the high voltage path to limit current.
6 NC unconnected Marked NC in the pin configuration diagram; the datasheet gives no function or rating for this pin.
7 Drain output HV MOSFET drain pin connected to the primary lead of the transformer, with a drain-source breakdown voltage BVdss of 600 V.
8 Drain output HV MOSFET drain pin connected to the primary lead of the transformer, with a drain-source breakdown voltage BVdss of 600 V.

Key specifications

Parameter Value
Manufacturer OB(On-Bright Elec)
Package DIP-8
Category Power Supply Chip
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD Supply Voltage VDD 10.5 23.5 V 2
Operating Ambient Temperature TA -20 85 ℃ 2
High-Voltage Pin, HV HV -0.3 500 V 2
VDD DC Supply Voltage VDD -0.3 30 V 2
FB Input Voltage FB -0.3 7 V 2
CS Input Voltage CS -0.3 7 V 2
VDD DC Clamp Current 10 mA 2
Operating Junction Temperature TJ -40 150 ℃ 2
Storage Temperature Tstg -55 150 ℃ 2
Lead Temperature 260 ℃ Soldering, 10 secs 2
Thermal resistance junction to ambient, DIP8 RJA 75 ℃/W DIP8 2
Frequency jittering Δf_OSC -8 8 % 6
Max duty cycle 75 80 85 % Max duty cycle @ VDD=18V,VFB=3V,VCS=0.3V 5
Vdd_clamp Vdd_clamp 30 32 34 V Ivdd=10mA 5
UVLO(ON) VDD Under Voltage Lockout Enter UVLO(ON) 8.3 9.3 10.3 V 5
UVLO(OFF) VDD Under Voltage Lockout Exit (Recovery) UVLO(OFF) 14.3 15.3 16.3 V 5
OVP(ON) Over voltage protection voltage OVP(ON) 24 26 28 V FB=3V, Ramp up VDD until gate clock is off 5
IHV Supply current from HV pin IHV 1 2.8 5 mA VDD=2V, HV=100V 5
HV pin leakage current after startup 10 uA VDD=18V, HV=500V 5
VDD Start up Current Istartup 5 20 uA VDD=UVLO(OFF)-1V, measure leakage current into VDD 5
Operation Current I_VDD_Operation 2 2.5 mA VFB=3V 5
Burst Mode Current 0.8 1 mA VDD=15V, VFB=1V 5
VFB Open Loop Voltage VFB_Open 3.9 5 V 5
Power limiting Debounce Time TD_PL 80 88 96 mSec 5
Current Limiting Threshold Voltage VTH_OC 0.72 0.75 0.78 V 5
Normal Oscillation Frequency FOSC 60 65 70 KHZ FB=3V 6
Static drain-source on resistance Rdson 4.4 5.5 Ω Static, Id=1.0A 6

CAD (KiCad official)

  • Symbol: OB5222AG
  • Footprint: Package_DIP:DIP-8_W7.62mm
  • 3D model: DIP-8 (KiCad packages3D, STEP)
  • 3D model files: ob5222ag-etched.step / ob5222ag-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ob5222ag.step / ob5222ag.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: OB(On-Bright Elec) datasheet (11 pp, sha256 59812ecb983780d4, retrieved 2026-11-02, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF