3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMLX90421GDC-ADC-000-RE
Melexis · Position Sensor · SOIC-8
MLX90421GDC-ADC-000-RE from Melexis, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Supply pin for the sensor; the datasheet's absolute maximum ratings table gives the positive VDD limits (28 V for under 48h, 37 V for under 60s at TAMB ≤ 35°C). |
| 2 | Test1 | passive | For Melexis factory test only; the pin is internally grounded in application mode and should be connected to PCB ground for improved EMC behavior. |
| 3 | Test2 | passive | For Melexis factory test only; the pin is internally grounded in application mode and should be connected to PCB ground for improved EMC behavior. |
| 4 | N.C. | unconnected | Not connected internally; the datasheet recommends connecting it to the PCB ground for improved EMC behavior. |
| 5 | OUT | output | Ratiometric analog or PWM sensor output of the MLX90421. |
| 6 | N.C. | unconnected | Not connected internally; the datasheet recommends connecting it to the PCB ground for improved EMC behavior. |
| 7 | VDEC | passive | Internal decoupling pin of the sensor's internal supply regulator, with a maximum internal voltage of 3.6 V stated in the absolute maximum ratings. |
| 8 | VSS | power_in | Ground pin of the sensor. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Melexis |
| Package | SOIC-8 |
| Category | Sensors |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Positive | VDD | 28 | V | < 48h | 9 | ||
| Supply Voltage Positive | VDD | 37 | V | < 60s; TAMB <= 35°C | 9 | ||
| Supply Voltage Reverse | VDD-rev | -14 | V | < 48h | 9 | ||
| Supply Voltage Reverse | VDD-rev | -18 | V | < 1h | 9 | ||
| Output Voltage Positive | VOUT | 28 | V | < 48h | 9 | ||
| Output Voltage Positive | VOUT | 34 | V | < 1h | 9 | ||
| Output Voltage Reverse | VOUT-rev | -14 | V | < 48h | 9 | ||
| Output Voltage Reverse | VOUT-rev | -18 | V | < 1h | 9 | ||
| Internal Voltage Positive | VDEC | 3.6 | V | < 1h | 9 | ||
| Internal Voltage Reverse | VDEC-rev | -0.3 | V | < 1h | 9 | ||
| Test1 pin Voltage Positive | VTest1 | 6 | V | < 1h | 9 | ||
| Test1 pin Voltage Reverse | VTest1-rev | -3 | V | < 1h | 9 | ||
| Test2 pin Voltage Positive | Vtest2 | 3.6 | V | < 1h | 9 | ||
| Test2 pin Voltage Reverse | Vtest2-rev | -0.3 | V | < 1h | 9 | ||
| Operating Temperature | TAMB | -40 | 160 | °C | 9 | ||
| Junction Temperature | TJ | 175 | °C | 9 | |||
| Storage Temperature | TST | -55 | 170 | °C | 9 | ||
| Magnetic Flux Density | Bmax | -1 | 1 | T | 9 | ||
| Supply Voltage Positive High-Temperature | VDD | 5.5 | V | TAMB = 180°C, see (3) | 10 | ||
| Supply Voltage Reverse High-Temperature | VDD-rev | -14 | V | TAMB = 180°C, < 1h | 10 | ||
| Output Voltage Positive High-Temperature | VOUT | 26 | V | TAMB = 180°C, < 1h | 10 | ||
| Output Voltage Reverse High-Temperature | VOUT-rev | -14 | V | TAMB = 180°C, < 1h | 10 | ||
| Operating Temperature High-Temperature Extension | TAMB | -40 | 180 | °C | < 250h | 10 | |
| Junction Temperature High-Temperature Extension | TJ | 190 | °C | < 250h | 10 | ||
| Storage Temperature High-Temperature Extension | TST | -55 | 190 | °C | < 250h | 10 | |
| Supply Voltage | VDD | 4.5 | 5 | 5.5 | V | 11 | |
| Supply Current | IDD | 7.5 | 8.5 | 10 | mA | Single | 11 |
| Start-up Level (rising) | VDDstartH | 3.85 | 4 | 4.15 | V | 11 | |
| PTC Entry Level (rising) | VPROV0 | 5.85 | 6.05 | 6.25 | V | Supply overvoltage detection | 11 |
| PTC Entry Level Hysteresis | VPROV0Hyst | 100 | 175 | 250 | mV | 11 | |
| Under voltage detection | VDDUVL | 3.75 | 3.9 | 4.05 | V | Supply voltage low threshold | 11 |
| Regulated Voltage | VDEC | 3.2 | 3.3 | 3.4 | V | Internal analog voltage | 11 |
| Output Short Circuit Current Limit | IOUTshort | 10 | 35 | mA | 11 | ||
| Analog output Saturation Level Low | VsatA_lo | 0.5 | 1.2 | %VDD | Pull-up RL 10 kΩ to Vext = VDD | 12 | |
| Analog output Saturation Level Low | VsatA_lo | 3.3 | 7.4 | %VDD | Pull-up RL 5 kΩ to Vext ≤ 18V | 12 | |
| Analog output Saturation Level High | VsatA_hi | 97 | 99 | %VDD | Pull-down RL 10 kΩ to 0V | 12 | |
| Analog output Saturation Level High | VsatA_hi | 95 | 98 | %VDD | Pull-down RL 5 kΩ to 0V | 12 | |
| Digital output with push-pull level low | VsatD_lopp | 1.2 | %VDD | Pull-up RL 10 kΩ to Vext = VDD | 12 | ||
| Digital output with push-pull level high | VsatD_hipp | 97 | %VDD | Pull-down RL 10 kΩ to 0V | 12 | ||
| Digital output with open-drain level low | VsatLoOd | 0 | 10 | %Vext | Pull-up to Vext ≤ 18V, IL ≤ 3.4mA | 12 | |
| Digital output with open-drain level high | VsatHiOd | 90 | 100 | %VDD | Pull-down to 0V, IL ≤ 3.4mA | 12 | |
| Digital open-drain output leakage pull-up above VDD | IleakpuOd | 100 | µA | Pull-up to Vext > VDD | 12 | ||
| Digital output leakage pull-up | Ileakpu | 20 | µA | Pull-up to Vext = VDD | 12 | ||
| Digital output leakage pull-down | Ileakpd | 20 | µA | Pull-down to 0V | 12 | ||
| Digital output Resistance | Ron | 27 | 50 | 130 | Ω | Push-pull mode (out of clamping band) | 12 |
| Passive Diagnostic Output Level Broken VSS | BVSSPD | 1.2 | 4 | %VDD | Broken VSS & Pull-down RL ≤ 25 kΩ to 0V | 12 | |
| Passive Diagnostic Output Level Broken VSS | BVSSPD | 0.5 | 1.6 | %VDD | Broken VSS & Pull-down RL ≤ 10 kΩ to 0V | 12 | |
| Passive Diagnostic Output Level Broken VSS pull-up | BVSSPU | 99.5 | 100 | %VDD | Broken VSS & Pull-up RL 1 kΩ to Vext | 12 | |
| Passive Diagnostic Output Level Broken VDD pull-down | BVDDPD | 0 | 0.5 | %VDD | Broken VDD & Pull-down RL 1 kΩ to 0V | 12 | |
| Passive Diagnostic Output Level Broken VDD pull-up | BVDDPU | 92.5 | 98.7 | %VDD | Broken VDD & Pull-up RL ≤ 25 kΩ to Vext | 12 | |
| Passive Diagnostic Output Level Broken VDD pull-up | BVDDPU | 97 | 99.5 | %VDD | Broken VDD & Pull-up RL ≤ 10 kΩ to Vext | 12 | |
| Magnetic Flux Density in X-Y plane | Bx, By | 70 | mT | Magnetic flux density in X-Y plane | 18 | ||
| Magnetic Flux Density in Z | Bz | 126 | mT | in absolute value | 18 | ||
| Useful Magnetic Flux Density Norm | BNorm | 10 | 20 | mT | 18 | ||
| Magnet Temperature Coefficient | TCm | -2400 | 0 | ppm/°C | 18 | ||
| XY - Intrinsic Linearity Error nominal | LE_XY | -1 | 1 | Deg. | 20 | ||
| XZ - Intrinsic Linearity Error nominal | LE_XZ | -2.5 | 2.5 | Deg. | 20 |
CAD (KiCad official)
- Symbol:
MLX90421GDC-ADC-000-RE - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
mlx90421gdc-adc-000-re-etched.step/mlx90421gdc-adc-000-re-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mlx90421gdc-adc-000-re.step/mlx90421gdc-adc-000-re.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Melexis datasheet (61 pp, sha256
f46c1cb6837cf778, retrieved 2026-10-29, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).