Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MLX90421GDC-ADC-000-RE

Melexis · Position Sensor · SOIC-8

MLX90421GDC-ADC-000-RE from Melexis, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Supply pin for the sensor; the datasheet's absolute maximum ratings table gives the positive VDD limits (28 V for under 48h, 37 V for under 60s at TAMB ≤ 35°C).
2 Test1 passive For Melexis factory test only; the pin is internally grounded in application mode and should be connected to PCB ground for improved EMC behavior.
3 Test2 passive For Melexis factory test only; the pin is internally grounded in application mode and should be connected to PCB ground for improved EMC behavior.
4 N.C. unconnected Not connected internally; the datasheet recommends connecting it to the PCB ground for improved EMC behavior.
5 OUT output Ratiometric analog or PWM sensor output of the MLX90421.
6 N.C. unconnected Not connected internally; the datasheet recommends connecting it to the PCB ground for improved EMC behavior.
7 VDEC passive Internal decoupling pin of the sensor's internal supply regulator, with a maximum internal voltage of 3.6 V stated in the absolute maximum ratings.
8 VSS power_in Ground pin of the sensor.

Key specifications

Parameter Value
Manufacturer Melexis
Package SOIC-8
Category Sensors
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Positive VDD 28 V < 48h 9
Supply Voltage Positive VDD 37 V < 60s; TAMB <= 35°C 9
Supply Voltage Reverse VDD-rev -14 V < 48h 9
Supply Voltage Reverse VDD-rev -18 V < 1h 9
Output Voltage Positive VOUT 28 V < 48h 9
Output Voltage Positive VOUT 34 V < 1h 9
Output Voltage Reverse VOUT-rev -14 V < 48h 9
Output Voltage Reverse VOUT-rev -18 V < 1h 9
Internal Voltage Positive VDEC 3.6 V < 1h 9
Internal Voltage Reverse VDEC-rev -0.3 V < 1h 9
Test1 pin Voltage Positive VTest1 6 V < 1h 9
Test1 pin Voltage Reverse VTest1-rev -3 V < 1h 9
Test2 pin Voltage Positive Vtest2 3.6 V < 1h 9
Test2 pin Voltage Reverse Vtest2-rev -0.3 V < 1h 9
Operating Temperature TAMB -40 160 °C 9
Junction Temperature TJ 175 °C 9
Storage Temperature TST -55 170 °C 9
Magnetic Flux Density Bmax -1 1 T 9
Supply Voltage Positive High-Temperature VDD 5.5 V TAMB = 180°C, see (3) 10
Supply Voltage Reverse High-Temperature VDD-rev -14 V TAMB = 180°C, < 1h 10
Output Voltage Positive High-Temperature VOUT 26 V TAMB = 180°C, < 1h 10
Output Voltage Reverse High-Temperature VOUT-rev -14 V TAMB = 180°C, < 1h 10
Operating Temperature High-Temperature Extension TAMB -40 180 °C < 250h 10
Junction Temperature High-Temperature Extension TJ 190 °C < 250h 10
Storage Temperature High-Temperature Extension TST -55 190 °C < 250h 10
Supply Voltage VDD 4.5 5 5.5 V 11
Supply Current IDD 7.5 8.5 10 mA Single 11
Start-up Level (rising) VDDstartH 3.85 4 4.15 V 11
PTC Entry Level (rising) VPROV0 5.85 6.05 6.25 V Supply overvoltage detection 11
PTC Entry Level Hysteresis VPROV0Hyst 100 175 250 mV 11
Under voltage detection VDDUVL 3.75 3.9 4.05 V Supply voltage low threshold 11
Regulated Voltage VDEC 3.2 3.3 3.4 V Internal analog voltage 11
Output Short Circuit Current Limit IOUTshort 10 35 mA 11
Analog output Saturation Level Low VsatA_lo 0.5 1.2 %VDD Pull-up RL 10 kΩ to Vext = VDD 12
Analog output Saturation Level Low VsatA_lo 3.3 7.4 %VDD Pull-up RL 5 kΩ to Vext ≤ 18V 12
Analog output Saturation Level High VsatA_hi 97 99 %VDD Pull-down RL 10 kΩ to 0V 12
Analog output Saturation Level High VsatA_hi 95 98 %VDD Pull-down RL 5 kΩ to 0V 12
Digital output with push-pull level low VsatD_lopp 1.2 %VDD Pull-up RL 10 kΩ to Vext = VDD 12
Digital output with push-pull level high VsatD_hipp 97 %VDD Pull-down RL 10 kΩ to 0V 12
Digital output with open-drain level low VsatLoOd 0 10 %Vext Pull-up to Vext ≤ 18V, IL ≤ 3.4mA 12
Digital output with open-drain level high VsatHiOd 90 100 %VDD Pull-down to 0V, IL ≤ 3.4mA 12
Digital open-drain output leakage pull-up above VDD IleakpuOd 100 µA Pull-up to Vext > VDD 12
Digital output leakage pull-up Ileakpu 20 µA Pull-up to Vext = VDD 12
Digital output leakage pull-down Ileakpd 20 µA Pull-down to 0V 12
Digital output Resistance Ron 27 50 130 Ω Push-pull mode (out of clamping band) 12
Passive Diagnostic Output Level Broken VSS BVSSPD 1.2 4 %VDD Broken VSS & Pull-down RL ≤ 25 kΩ to 0V 12
Passive Diagnostic Output Level Broken VSS BVSSPD 0.5 1.6 %VDD Broken VSS & Pull-down RL ≤ 10 kΩ to 0V 12
Passive Diagnostic Output Level Broken VSS pull-up BVSSPU 99.5 100 %VDD Broken VSS & Pull-up RL 1 kΩ to Vext 12
Passive Diagnostic Output Level Broken VDD pull-down BVDDPD 0 0.5 %VDD Broken VDD & Pull-down RL 1 kΩ to 0V 12
Passive Diagnostic Output Level Broken VDD pull-up BVDDPU 92.5 98.7 %VDD Broken VDD & Pull-up RL ≤ 25 kΩ to Vext 12
Passive Diagnostic Output Level Broken VDD pull-up BVDDPU 97 99.5 %VDD Broken VDD & Pull-up RL ≤ 10 kΩ to Vext 12
Magnetic Flux Density in X-Y plane Bx, By 70 mT Magnetic flux density in X-Y plane 18
Magnetic Flux Density in Z Bz 126 mT in absolute value 18
Useful Magnetic Flux Density Norm BNorm 10 20 mT 18
Magnet Temperature Coefficient TCm -2400 0 ppm/°C 18
XY - Intrinsic Linearity Error nominal LE_XY -1 1 Deg. 20
XZ - Intrinsic Linearity Error nominal LE_XZ -2.5 2.5 Deg. 20

CAD (KiCad official)

  • Symbol: MLX90421GDC-ADC-000-RE
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: mlx90421gdc-adc-000-re-etched.step / mlx90421gdc-adc-000-re-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mlx90421gdc-adc-000-re.step / mlx90421gdc-adc-000-re.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Melexis datasheet (61 pp, sha256 f46c1cb6837cf778, retrieved 2026-10-29, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF