Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

LM2676SX-ADJ

3D generated from the datasheet; KiCad's model does not fit this maker's body.

Texas Instruments · DC-DC Converters · TO-263-7

LM2676SX-ADJ from Texas Instruments, in a TO-263-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 Switch_output passive Source pin of the internal high-side DMOS FET; the switching node. Connects to the inductor and the cathode of the external catch (freewheel) diode.
2 Input power_in Supply input to the drain of the internal high-side FET. Connect to the 8-V to 40-V supply with input bypass capacitor CIN; path from VIN to bypass CIN and GND must be as short as possible.
3 CB input Boot-strap capacitor connection for the high-side gate driver. Connect a high-quality 100-nF capacitor from CB to the Switch_output (VSW) pin.
4 GND power_in Power ground. Connect to system ground; return path for CIN and COUT must be short and low-impedance.
5 NC no_connect No connect. Leave floating or tie per PCB convention.
6 FB input Feedback sense input. For the ADJ version, connect to the midpoint of an external resistor divider from VOUT to GND to program the output voltage (VREF ≈ 1.21 V). Absolute max range −0.3 V to 14 V.
7 ON/OFF input Enable input for the regulator. High (or float) = ON, Low = OFF; pull high or float to enable, drive low for ~50-µA standby shutdown.
8 GND power_in Package tab (pad 8). Table 4-1: all DAP, tab, and paddle connections are at ground potential and must be connected to system ground.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package TO-263-7
Category PMIC
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Feedback voltage VFB 1.186 1.21 1.234 V VIN = 8 V to 40 V, 100 mA ≤ IOUT ≤ 3 A, VOUT programmed for 5 V 6
Feedback voltage over junction temperature VFB 1.174 1.246 V Over junction temperature range -40°C to 125°C; VIN = 8 V to 40 V, 100 mA ≤ IOUT ≤ 3 A, VOUT programmed for 5 V 6
Quiescent current IQ 4.2 6 mA VFEEDBACK = 8 V for 3.3-V, 5-V, and ADJ versions; VFEEDBACK = 15 V for 12-V versions 6
Standby quiescent current ISTBY 50 100 µA ON/OFF pin = 0 V 6
Standby quiescent current over junction temperature ISTBY 150 µA ON/OFF pin = 0 V; over junction temperature range -40°C to 125°C 6
Current limit ICL 3.8 4.5 5.25 A 6
Current limit over junction temperature ICL 3.6 5.4 A Over junction temperature range -40°C to 125°C 6
Output leakage current IL 200 µA VIN = 40 V, soft-start pin = 0 V; VSWITCH = 0 V 6
Switch ON-resistance RDS(ON) 0.15 0.17 Ω ISWITCH = 3 A 6
Switch ON-resistance over junction temperature RDS(ON) 0.29 Ω ISWITCH = 3 A; over junction temperature range -40°C to 125°C 6
Oscillator frequency over junction temperature fO 225 280 kHz Measured at switch pin; over junction temperature range -40°C to 125°C 6
Maximum duty cycle D 91 % 6
Minimum duty cycle D 0 % 6
ON/OFF threshold voltage over junction temperature VON/OFF 0.8 2 V Over junction temperature range -40°C to 125°C 6
ON/OFF input current over junction temperature ION/OFF 45 µA ON/OFF pin = 0 V; over junction temperature range -40°C to 125°C 6
Input supply voltage VIN 45 V 4
Soft-start pin voltage -0.1 6 V 4
Switch voltage to ground -1 V DC voltage; max printed as VIN. Extended negative limits: -10 V for pulses up to 20 ns, -6 V up to 60 ns, -3 V up to 100 ns 4
Feedback pin voltage -0.3 14 V 4
Soldering temperature, wave 260 °C Wave, 4 s 4
Soldering temperature, infrared 240 °C Infrared, 10 s 4
Soldering temperature, vapor phase 219 °C Vapor phase, 75 s 4
Storage temperature Tstg -65 150 °C 4
Supply voltage 8 40 V 4
Junction temperature TJ -40 125 °C 4
Junction-to-case (top) thermal resistance RθJC(top) 2 °C/W 4

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts copper (2) Junction to ambient thermal resistance (no external heat sink) for the 7-lead TO-220 package mounted vertically, with 0.5 in leads in a socket, or on a PCB with minimum copper area. 5

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: LM2676SX-ADJ
  • Footprint: Package_TO_SOT_SMD:TO-263-7_TabPin8
  • 3D model: TO-263-7, generated on the KiCad land (body 8.64 x 10.16 mm, terminals on the pads, 4.57 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: lm2676sx-adj-etched.step / lm2676sx-adj-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); lm2676sx-adj.step / lm2676sx-adj.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (41 pp, sha256 2f3085e42097cc93, retrieved 2026-11-17, tier: manufacturer)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF