Generated by kicad-footprint-generator · KiCad file format 20260206
LM2676SX-ADJ
3D generated from the datasheet; KiCad's model does not fit this maker's body.
Texas Instruments · DC-DC Converters · TO-263-7
LM2676SX-ADJ from Texas Instruments, in a TO-263-7. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | Switch_output | passive | Source pin of the internal high-side DMOS FET; the switching node. Connects to the inductor and the cathode of the external catch (freewheel) diode. |
| 2 | Input | power_in | Supply input to the drain of the internal high-side FET. Connect to the 8-V to 40-V supply with input bypass capacitor CIN; path from VIN to bypass CIN and GND must be as short as possible. |
| 3 | CB | input | Boot-strap capacitor connection for the high-side gate driver. Connect a high-quality 100-nF capacitor from CB to the Switch_output (VSW) pin. |
| 4 | GND | power_in | Power ground. Connect to system ground; return path for CIN and COUT must be short and low-impedance. |
| 5 | NC | no_connect | No connect. Leave floating or tie per PCB convention. |
| 6 | FB | input | Feedback sense input. For the ADJ version, connect to the midpoint of an external resistor divider from VOUT to GND to program the output voltage (VREF ≈ 1.21 V). Absolute max range −0.3 V to 14 V. |
| 7 | ON/OFF | input | Enable input for the regulator. High (or float) = ON, Low = OFF; pull high or float to enable, drive low for ~50-µA standby shutdown. |
| 8 | GND | power_in | Package tab (pad 8). Table 4-1: all DAP, tab, and paddle connections are at ground potential and must be connected to system ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | TO-263-7 |
| Category | PMIC |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Feedback voltage | VFB | 1.186 | 1.21 | 1.234 | V | VIN = 8 V to 40 V, 100 mA ≤ IOUT ≤ 3 A, VOUT programmed for 5 V | 6 |
| Feedback voltage over junction temperature | VFB | 1.174 | 1.246 | V | Over junction temperature range -40°C to 125°C; VIN = 8 V to 40 V, 100 mA ≤ IOUT ≤ 3 A, VOUT programmed for 5 V | 6 | |
| Quiescent current | IQ | 4.2 | 6 | mA | VFEEDBACK = 8 V for 3.3-V, 5-V, and ADJ versions; VFEEDBACK = 15 V for 12-V versions | 6 | |
| Standby quiescent current | ISTBY | 50 | 100 | µA | ON/OFF pin = 0 V | 6 | |
| Standby quiescent current over junction temperature | ISTBY | 150 | µA | ON/OFF pin = 0 V; over junction temperature range -40°C to 125°C | 6 | ||
| Current limit | ICL | 3.8 | 4.5 | 5.25 | A | 6 | |
| Current limit over junction temperature | ICL | 3.6 | 5.4 | A | Over junction temperature range -40°C to 125°C | 6 | |
| Output leakage current | IL | 200 | µA | VIN = 40 V, soft-start pin = 0 V; VSWITCH = 0 V | 6 | ||
| Switch ON-resistance | RDS(ON) | 0.15 | 0.17 | Ω | ISWITCH = 3 A | 6 | |
| Switch ON-resistance over junction temperature | RDS(ON) | 0.29 | Ω | ISWITCH = 3 A; over junction temperature range -40°C to 125°C | 6 | ||
| Oscillator frequency over junction temperature | fO | 225 | 280 | kHz | Measured at switch pin; over junction temperature range -40°C to 125°C | 6 | |
| Maximum duty cycle | D | 91 | % | 6 | |||
| Minimum duty cycle | D | 0 | % | 6 | |||
| ON/OFF threshold voltage over junction temperature | VON/OFF | 0.8 | 2 | V | Over junction temperature range -40°C to 125°C | 6 | |
| ON/OFF input current over junction temperature | ION/OFF | 45 | µA | ON/OFF pin = 0 V; over junction temperature range -40°C to 125°C | 6 | ||
| Input supply voltage | VIN | 45 | V | 4 | |||
| Soft-start pin voltage | -0.1 | 6 | V | 4 | |||
| Switch voltage to ground | -1 | V | DC voltage; max printed as VIN. Extended negative limits: -10 V for pulses up to 20 ns, -6 V up to 60 ns, -3 V up to 100 ns | 4 | |||
| Feedback pin voltage | -0.3 | 14 | V | 4 | |||
| Soldering temperature, wave | 260 | °C | Wave, 4 s | 4 | |||
| Soldering temperature, infrared | 240 | °C | Infrared, 10 s | 4 | |||
| Soldering temperature, vapor phase | 219 | °C | Vapor phase, 75 s | 4 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 4 | ||
| Supply voltage | 8 | 40 | V | 4 | |||
| Junction temperature | TJ | -40 | 125 | °C | 4 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 2 | °C/W | 4 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | copper | (2) Junction to ambient thermal resistance (no external heat sink) for the 7-lead TO-220 package mounted vertically, with 0.5 in leads in a socket, or on a PCB with minimum copper area. | 5 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
LM2676SX-ADJ - Footprint:
Package_TO_SOT_SMD:TO-263-7_TabPin8 - 3D model: TO-263-7, generated on the KiCad land (body 8.64 x 10.16 mm, terminals on the pads, 4.57 mm tall, datasheet A, nominal). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
lm2676sx-adj-etched.step/lm2676sx-adj-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);lm2676sx-adj.step/lm2676sx-adj.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (41 pp, sha256
2f3085e42097cc93, retrieved 2026-11-17, tier: manufacturer) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).