3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownRM1201ASO8C
Realmagic · Microcontroller Units (MCUs/MPUs/SOCs) · SOP-8
RM1201ASO8C from Realmagic, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, read twice and the reads agreed); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Power supply, with a 1.8 V to 5.5 V operating range (2.5 V to 5.5 V at system frequency up to 4 MHz). |
| 2 | PA3/RSTN/VPP/[PWM1] | bidirectional | PORTA I/O with programmable pull-up/pull-down and interrupt-on-change (true open-drain when set as output), also active-low hardware reset input with configurable internal pull-up, programming voltage pin, and open-drain PWM1 output that needs an external pull-up resistor. |
| 3 | PA4/TK3/[PWM0] | bidirectional | PORTA I/O with programmable pull-up/pull-down and interrupt-on-change, also touch key channel 3 analog input and PWM0 output, with configurable high drive (3/6/18/24 mA source at VDD = 5 V). |
| 4 | PA5/[TK2] | bidirectional | PORTA I/O with programmable pull-up/pull-down and interrupt-on-change, also touch key channel 2 analog input, with configurable high drive (3/6/18/24 mA source at VDD = 5 V). |
| 5 | PA2/TK2/PWM1/T0 | bidirectional | PORTA I/O with programmable pull-up/pull-down and interrupt-on-change, also touch key channel 2 analog input, PWM1 output, and Timer0 external counting clock input. |
| 6 | PA1/PDA/TK1/PWM0 | bidirectional | PORTA I/O with programmable pull-up/pull-down and interrupt-on-change, also serial programming and debug data I/O, touch key channel 1 analog input, and PWM0 output. |
| 7 | PA0/PCL/TK0 | bidirectional | PORTA I/O with programmable pull-up/pull-down and interrupt-on-change, also serial programming and debug clock input and touch key channel 0 analog input. |
| 8 | VSS | power_in | Ground. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Realmagic |
| Package | SOP-8 |
| Category | Embedded Processors & Controllers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage (system frequency <= 2MHz) | VDD | 1.8 | 5.5 | V | System frequency <= 2MHz | 12 | |
| Operating voltage (system frequency <= 4MHz) | VDD | 2.5 | 5.5 | V | System frequency <= 4MHz | 12 | |
| Operating temperature | TON | -40 | 85 | ℃ | 11 | ||
| Storage temperature | TOFF | -40 | 125 | ℃ | 11 | ||
| Operating voltage | VDD | -0.3 | 5.5 | V | 11 | ||
| I/O output source current, single I/O port | IOH | 25 | mA | Single I/O port operating | 11 | ||
| I/O output source current, all I/O ports | IOH | 100 | mA | All I/O ports operating | 11 | ||
| I/O input current, single I/O port | IOL | 25 | mA | Single I/O port operating | 11 | ||
| I/O input current, all I/O ports | IOL | 100 | mA | All I/O ports operating | 11 | ||
| Calibrated internal 8 MHz HIRC frequency accuracy | FHIRC | -1 | 1 | % | TA = 25 ℃, VDD = 5V | 13 | |
| Calibrated internal 8 MHz HIRC frequency accuracy | FHIRC | -3 | 3 | % | TA = -40 |
13 | |
| Calibrated internal 32 KHz LIRC frequency accuracy | FLIRC | -10 | 10 | % | TA = 25 ℃, VDD = 2.5V~5.5V | 13 | |
| Calibrated internal 32 KHz LIRC frequency accuracy | FLIRC | -40 | 40 | % | TA = -40 |
13 | |
| I/O high leakage current | ILIH | 1 | uA | All input ports, VIO = VDD | 12 | ||
| I/O low leakage current | ILIL | 1 | uA | All input ports, VIO = 0V | 12 |
CAD (KiCad official)
- Symbol:
RM1201ASO8C - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
rm1201aso8c-etched.step/rm1201aso8c-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rm1201aso8c.step/rm1201aso8c.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Realmagic datasheet (20 pp, sha256
2c80a7287dadbb0e, retrieved 2026-11-07, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).