main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers rm1201aso8c: viewers · Ray
package.json Publish 0.1.2 · Ray
page.json Publish 0.1.2 · Ray
README.md rm1201aso8c: the pins were read twice by one model (sonnet); say so instead of 'cross-checked by two models' · Ray
rm1201aso8c-etched.glb Publish 0.1.0 · Ray
rm1201aso8c-etched.step rm1201aso8c: factory component page (tier=lcsc) · Ray
rm1201aso8c-hero.glb rm1201aso8c: hero GLB from the etched model (keeps the MPN mark) · Ray
rm1201aso8c-hero.overlay.json Publish 0.1.0 · Ray
rm1201aso8c.glb Publish 0.1.0 · Ray
rm1201aso8c.kicad_mod Publish 0.1.0 · Ray
rm1201aso8c.kicad_sym Publish 0.1.0 · Ray
rm1201aso8c.lbr Publish 0.1.0 · Ray
rm1201aso8c.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

RM1201ASO8C

Realmagic · Microcontroller Units (MCUs/MPUs/SOCs) · SOP-8

RM1201ASO8C from Realmagic, in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, read twice and the reads agreed); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Power supply, with a 1.8 V to 5.5 V operating range (2.5 V to 5.5 V at system frequency up to 4 MHz).
2 PA3/RSTN/VPP/[PWM1] bidirectional PORTA I/O with programmable pull-up/pull-down and interrupt-on-change (true open-drain when set as output), also active-low hardware reset input with configurable internal pull-up, programming voltage pin, and open-drain PWM1 output that needs an external pull-up resistor.
3 PA4/TK3/[PWM0] bidirectional PORTA I/O with programmable pull-up/pull-down and interrupt-on-change, also touch key channel 3 analog input and PWM0 output, with configurable high drive (3/6/18/24 mA source at VDD = 5 V).
4 PA5/[TK2] bidirectional PORTA I/O with programmable pull-up/pull-down and interrupt-on-change, also touch key channel 2 analog input, with configurable high drive (3/6/18/24 mA source at VDD = 5 V).
5 PA2/TK2/PWM1/T0 bidirectional PORTA I/O with programmable pull-up/pull-down and interrupt-on-change, also touch key channel 2 analog input, PWM1 output, and Timer0 external counting clock input.
6 PA1/PDA/TK1/PWM0 bidirectional PORTA I/O with programmable pull-up/pull-down and interrupt-on-change, also serial programming and debug data I/O, touch key channel 1 analog input, and PWM0 output.
7 PA0/PCL/TK0 bidirectional PORTA I/O with programmable pull-up/pull-down and interrupt-on-change, also serial programming and debug clock input and touch key channel 0 analog input.
8 VSS power_in Ground.

Key specifications

Parameter Value
Manufacturer Realmagic
Package SOP-8
Category Embedded Processors & Controllers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating voltage (system frequency <= 2MHz) VDD 1.8 5.5 V System frequency <= 2MHz 12
Operating voltage (system frequency <= 4MHz) VDD 2.5 5.5 V System frequency <= 4MHz 12
Operating temperature TON -40 85 ℃ 11
Storage temperature TOFF -40 125 ℃ 11
Operating voltage VDD -0.3 5.5 V 11
I/O output source current, single I/O port IOH 25 mA Single I/O port operating 11
I/O output source current, all I/O ports IOH 100 mA All I/O ports operating 11
I/O input current, single I/O port IOL 25 mA Single I/O port operating 11
I/O input current, all I/O ports IOL 100 mA All I/O ports operating 11
Calibrated internal 8 MHz HIRC frequency accuracy FHIRC -1 1 % TA = 25 ℃, VDD = 5V 13
Calibrated internal 8 MHz HIRC frequency accuracy FHIRC -3 3 % TA = -4085℃, VDD = 2.5V5.5V 13
Calibrated internal 32 KHz LIRC frequency accuracy FLIRC -10 10 % TA = 25 ℃, VDD = 2.5V~5.5V 13
Calibrated internal 32 KHz LIRC frequency accuracy FLIRC -40 40 % TA = -4085℃, VDD = 2.5V5.5V 13
I/O high leakage current ILIH 1 uA All input ports, VIO = VDD 12
I/O low leakage current ILIL 1 uA All input ports, VIO = 0V 12

CAD (KiCad official)

  • Symbol: RM1201ASO8C
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: rm1201aso8c-etched.step / rm1201aso8c-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rm1201aso8c.step / rm1201aso8c.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Realmagic datasheet (20 pp, sha256 2c80a7287dadbb0e, retrieved 2026-11-07, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF