Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MSPM0L1306SRGER

Texas Instruments · Microcontrollers (MCU/MPU/SOC) · VQFN-24(4x4)

MSPM0L1306SRGER from Texas Instruments, in a VQFN-24(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 PA1 bidirectional 5-V tolerant open-drain I/O with wakeup from SHUTDOWN, configurable as I2C0_SCL, UART1_RX, or TIMG1_C1.
2 NRST input Active-low reset input pin; must be pulled high to VCC for device operation.
3 VDD power_in Power supply input with recommended operating voltage range 1.62 V to 3.6 V.
4 VSS power_in Ground supply.
5 PA2/ROSC bidirectional External oscillator frequency correction resistor input (100 kΩ ±0.1% required when FCL enabled) or general-purpose digital I/O.
6 PA3 bidirectional General-purpose digital I/O configurable for TIMG2_C0, SPI0_CS1, UART1_CTS, or COMP0_OUT functions.
7 PA4 bidirectional General-purpose digital I/O configurable for TIMG2_C1, SPI0_POCI, or UART1_RTS functions.
8 PA9 bidirectional General-purpose digital I/O configurable for UART0_RX, SPI0_PICO, UART1_CTS, TIMG2_C1, or CLK_OUT functions.
9 PA10 bidirectional High-speed general-purpose digital I/O configurable for UART1_TX, SPI0_POCI, I2C0_SDA, TIMG4_C0, or CLK_OUT functions.
10 PA11 bidirectional General-purpose digital I/O configurable for UART1_RX, SPI0_SCK, I2C0_SCL, TIMG4_C1, or COMP0_OUT functions.
11 PA15/A9 bidirectional General-purpose digital I/O or ADC0 analog input 9, configurable for UART1_RTS, I2C1_SCL, SPI0_CS2, or TIMG4_C1 functions.
12 PA16/A8/OPA1_OUT bidirectional General-purpose digital I/O or ADC0 analog input 8, OPA1 output, or Comparator 0 output with multiple peripheral functions.
13 PA17/OPA1_IN1- bidirectional General-purpose digital I/O with wakeup capability, OPA1 inverting terminal input, configurable for UART0_TX, I2C1_SCL, SPI0_SCK, or TIMG4_C0 functions.
14 PA18/A7/OPA1_IN0+/GPAMP_IN- bidirectional General-purpose digital I/O with wakeup capability, ADC0 analog input 7, OPA1 non-inverting input, or GPAMP inverting input with multiple peripheral functions.
15 PA19/SWDIO bidirectional High-speed Serial Wire Debug data I/O pin or general-purpose digital I/O configurable for I2C1_SDA or SPI0_POCI functions.
16 PA20/A6/COMP0_IN1+/SWCLK bidirectional Serial Wire Debug clock input, ADC0 analog input 6, Comparator 0 non-inverting input 1, or general-purpose I/O for I2C/timer functions.
17 PA21/A5/VREF- input External voltage reference ground supply input (required with decoupling capacitor), ADC0 analog input 5, or general-purpose digital I/O.
18 PA22/A4/GPAMP_OUT/OPA0_OUT bidirectional General-purpose digital I/O, ADC0 analog input 4, GPAMP output, or OPA0 output with multiple peripheral functions.
19 PA23/VREF+ input External voltage reference power supply input (requires decoupling capacitor), Comparator 0 inverting input 1, or general-purpose digital I/O.
20 PA24/A3/OPA0_IN1-/OPA0_IN0- bidirectional General-purpose digital I/O, ADC0 analog input 3, OPA0 inverting terminal inputs, configurable for SPI0_CS2, TIMG0_C1, or UART0_RTS functions.
21 PA25/A2/OPA0_IN0+ bidirectional General-purpose digital I/O, ADC0 analog input 2, OPA0 non-inverting terminal input, configurable for TIMG4_C1, UART0_TX, or SPI0_PICO functions.
22 PA26/A1/GPAMP_IN+/COMP0_IN0+ bidirectional General-purpose digital I/O, ADC0 analog input 1, GPAMP non-inverting input, Comparator 0 non-inverting input, configurable for TIMG1_C0, UART0_RX, or SPI0_POCI functions.
23 VCORE power_out Regulated core power supply output (1.35 V nominal) requiring 470 nF decoupling capacitor with no external load.
24 PA0 bidirectional 5-V tolerant open-drain I/O with wakeup from SHUTDOWN, configurable as UART1_TX, I2C0_SDA, TIMG1_C0, or SPI0_CS1 (default BSL I2C_SDA).
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-24(4x4)
Category Embedded Processors & Controllers
Pins 25

CAD (KiCad official)

  • Symbol: MSPM0L1306SRGER
  • Footprint: Package_DFN_QFN:QFN-24-1EP_4x4mm_P0.5mm_EP2.6x2.6mm
  • 3D model: VQFN-24(4x4) (KiCad packages3D, STEP)
  • 3D model files: mspm0l1306srger-etched.step / mspm0l1306srger-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mspm0l1306srger.step / mspm0l1306srger.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (85 pp, sha256 d1eb766306fc0429, retrieved 2026-09-23, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF