Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ADAS3022BSTZ

Analog Devices · Analog To Digital Converters (ADCs) · LQFP-48(7x7)

ADAS3022BSTZ from Analog Devices, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN0 input Input Channel 0, referenced to COM in single-ended mode or paired with IN1 as a differential pair.
2 IN1 input Input Channel 1, referenced to COM in single-ended mode or paired with IN0 as a differential pair.
3 IN2 input Input Channel 2, referenced to COM in single-ended mode or paired with IN3 as a differential pair.
4 IN3 input Input Channel 3, referenced to COM in single-ended mode or paired with IN2 as a differential pair.
5 NIC unconnected Not internally connected.
6 AUX+ input Auxiliary input channel positive input; AUX+ and AUX- are not referenced to COM.
7 IN4 input Input Channel 4, referenced to COM in single-ended mode or paired with IN5 as a differential pair.
8 IN5 input Input Channel 5, referenced to COM in single-ended mode or paired with IN4 as a differential pair.
9 IN6 input Input Channel 6, referenced to COM in single-ended mode or paired with IN7 as a differential pair.
10 IN7 input Input Channel 7, referenced to COM in single-ended mode or paired with IN6 as a differential pair.
11 COM input Common channel input to which IN0 to IN7 are referenced; the maximum input voltage on this pin is ±10.24 V for all PGIA gains.
12 NIC unconnected Not internally connected.
13 CS input Active-low chip select that enables the digital interface; tie CS to DGND or CNV for a dedicated serial interface.
14 DIN input Serial data input for the 16-bit configuration (CFG) word, clocked in on SCK rising edges; do not write data during a conversion.
15 RESET input Asynchronous reset; a low-to-high transition aborts any active conversion and resets the CFG register to its default state.
16 AGND power_in Analog ground; connect to the system analog ground plane.
17 PD input Power-down; a low-to-high transition powers down the device, which must be held high until power-on, then wait 100 ms and complete one dummy conversion before converting.
18 NIC unconnected Not internally connected.
19 SCK input Serial clock input; DIN and SDO data are synchronized with SCK.
20 VIO power_in Digital interface supply, recommended to match the host interface supply of 1.8 V, 2.5 V, 3.3 V or 5 V.
21 SDO output Serial data output presenting the conversion result in twos complement format, synchronized to SCK falling edges.
22 NIC unconnected Not internally connected.
23 BUSY/SDO2 output Converter busy output, high during a conversion; when SDO2 is enabled after end of conversion, it outputs the result in twos complement format on SCK falling edges.
24 CNV input Convert input; a conversion initiates on the rising edge of CNV.
25 DGND power_in Digital ground; connect to the system digital ground plane.
26 DGND power_in Digital ground; connect to the system digital ground plane.
27 AGND power_in Analog ground; connect to the system analog ground plane.
28 AGND power_in Analog ground; connect to the system analog ground plane.
29 DCAP power_out Internally regulated 2.5 V digital regulator output; decouple with a 10 µF and a 0.1 µF local capacitor.
30 ACAP power_out Internally regulated 2.5 V analog regulator output supplying the ADC core and analog circuits except the reference; decouple with a 10 µF and a 0.1 µF capacitor.
31 DVDD power_in Digital 5 V supply; decouple with a 10 µF and a 0.1 µF local capacitor.
32 NIC unconnected Not internally connected.
33 AVDD power_in Analog 5 V supply; decouple with a 10 µF and a 0.1 µF local capacitor.
34 NIC unconnected Not internally connected.
35 NIC unconnected Not internally connected.
36 NIC unconnected Not internally connected.
37 RCAP power_out Internally regulated 2.5 V analog regulator output supplying the internal reference; decouple with a 10 µF and a 0.1 µF capacitor.
38 REFIN bidirectional Internal 2.5 V bandgap reference output, reference buffer input, or reference power-down input; REF1 and REF2 must be tied together externally.
39 REF1 bidirectional Reference input/output; requires individual decoupling with an external 10 µF ceramic capacitor placed close to REF1, REF2 and REFN.
40 REF2 bidirectional Reference input/output; requires individual decoupling with an external 10 µF ceramic capacitor placed close to REF1, REF2 and REFN, and must be tied to REF1 externally.
41 NIC unconnected Not internally connected.
42 RGND power_in Reference supply ground; connect to the system analog ground plane.
43 REFN power_in Reference input/output ground; connect the reference capacitors on REF1 and REF2 to REFN, then connect REFN to the analog ground plane.
44 NIC unconnected Not internally connected.
45 NIC unconnected Not internally connected.
46 VSSH power_in High-voltage analog negative supply, nominally −15 V; decouple with a 10 µF and a 0.1 µF local capacitor and connect the exposed pad to VSSH.
47 VDDH power_in High-voltage analog positive supply, nominally +15 V; decouple with a 10 µF and a 0.1 µF local capacitor.
48 AUX− input Auxiliary input channel negative input.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package LQFP-48(7x7)
Category ADC/DAC/Data Conversion
Pins 48

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Differential Input Voltage Range, PGIA gain = 0.16 VIN -6 6 VREF PGIA gain = 0.16, VIN = 49.15 V p-p 3
Differential Input Voltage Range, PGIA gain = 0.2 VIN -5 5 VREF PGIA gain = 0.2, VIN = 40.96 V p-p 3
Differential Input Voltage Range, PGIA gain = 0.4 VIN -2.5 2.5 VREF PGIA gain = 0.4, VIN = 20.48 V p-p 3
Differential Input Voltage Range, PGIA gain = 0.8 VIN -1.25 1.25 VREF PGIA gain = 0.8, VIN = 10.24 V p-p 3
Differential Input Voltage Range, PGIA gain = 1.6 VIN -0.625 0.625 VREF PGIA gain = 1.6, VIN = 5.12 V p-p 3
Differential Input Voltage Range, PGIA gain = 3.2 VIN -0.3125 0.3125 VREF PGIA gain = 3.2, VIN = 2.56 V p-p 3
Differential Input Voltage Range, PGIA gain = 6.4 VIN -0.1563 0.1563 VREF PGIA gain = 6.4, VIN = 1.28 V p-p 3
Input Impedance ZIN 500 MΩ 3
Channel Off Leakage -0.6 0.6 nA 3
Channel On Leakage -0.02 0.02 nA 3
Common-Mode Voltage Range, PGIA gain = 0.4 -5.12 5.12 V VIN+, VIN−; full-scale differential inputs; PGIA gain = 0.4 3
Common-Mode Voltage Range, PGIA gain = 0.8 -7.68 7.68 V VIN+, VIN−; full-scale differential inputs; PGIA gain = 0.8 3
Common-Mode Voltage Range, PGIA gain = 1.6 -8.96 8.96 V VIN+, VIN−; full-scale differential inputs; PGIA gain = 1.6 3
Common-Mode Voltage Range, PGIA gain = 3.2 -9.6 9.6 V VIN+, VIN−; full-scale differential inputs; PGIA gain = 3.2 3
Common-Mode Voltage Range, PGIA gain = 6.4 -9.92 9.92 V VIN+, VIN−; full-scale differential inputs; PGIA gain = 6.4 3
Conversion Rate, one channel/one pair 0 1000 kSPS One channel/one pair 3
Conversion Rate, two channels/two pairs 0 500 kSPS Two channels/two pairs 3
Conversion Rate, four channels/four pairs 0 250 kSPS Four channels/four pairs 3
Conversion Rate, eight channels 0 125 kSPS Eight channels 3
No Missing Codes 16 Bits 3
Gain Error -9 9 LSB External reference, all PGIA gains, TA = 25°C 3
Offset Error, PGIA gain = 0.16, 0.2, 0.4, 0.8 -3 0.2 3 LSB External reference, TA = 25°C 3
Offset Error, PGIA gain = 1.6 -4 0.2 4 LSB External reference, TA = 25°C 3
Offset Error, PGIA gain = 3.2 -7.5 0.2 7.5 LSB External reference, TA = 25°C 3
Offset Error, PGIA gain = 6.4 -12.5 0.2 12.5 LSB External reference, TA = 25°C 3
Integral Linearity Error, PGIA gain = 0.16, 0.2, 0.4, 0.8, 1.6 -2 0.6 2 LSB PGIA gain = 0.16, 0.2, 0.4, 0.8, 1.6 3
Integral Linearity Error, PGIA gain = 3.2 -3 1 3 LSB PGIA gain = 3.2 3
Integral Linearity Error, PGIA gain = 6.4 -5 1.5 5 LSB PGIA gain = 6.4 3
Differential Linearity Error, PGIA gain = 0.16, 0.2, 0.4, 0.8, 1.6 -0.9 0.6 1 LSB PGIA gain = 0.16, 0.2, 0.4, 0.8, 1.6 3
Differential Linearity Error, PGIA gain = 3.2 -0.9 0.75 1.25 LSB PGIA gain = 3.2 3
Differential Linearity Error, PGIA gain = 6.4 -0.9 0.75 1.25 LSB PGIA gain = 6.4 3
Operating Temperature Range (industrial) -40 85 °C Industrial temperature range; TMIN to TMAX 1
VDDH supply tolerance VDDH -5 5 % VDDH = 15 V ± 5% 3
VSSH supply tolerance VSSH -5 5 % VSSH = −15 V ± 5% 3
AVDD supply tolerance AVDD -5 5 % AVDD = 5 V ± 5% 3
DVDD supply tolerance DVDD -5 5 % DVDD = 5 V ± 5% 3
Digital interface supply VIO VIO 1.8 V VIO = 1.8 V to AVDD 3
AUX+, AUX− to AGND -0.3 V Lower limit only; upper limit is AVDD + 0.3 V 9
REFx to AGND -0.3 V Lower limit AGND − 0.3 V; upper limit is AVDD + 0.3 V 9
REFIN to AGND -0.3 2.7 V 9
REFN to AGND -0.3 0.3 V 9
Ground voltage differences AGND, RGND, DGND -0.3 0.3 V 9
VDDH to AGND VDDH -0.3 16.5 V 9
VSSH to AGND VSSH -16.5 0.3 V 9
AVDD, DVDD, VIO to AGND -0.3 7 V 9
ACAP, DCAP, RCAP to GND -0.3 2.7 V 9
CNV, DIN, SCK, RESET, PD, CS to DGND -0.3 V Lower limit only; upper limit is VIO + 0.3 V 9
SDO, BUSY to DGND -0.3 V Lower limit only; upper limit is VIO + 0.3 V 9
Internal Power Dissipation 2 W 9
Junction Temperature 125 °C 9
Storage Temperature Range -65 125 °C 9
VDDH supply nominal VDDH 15 V Nominal, ±5% tolerance 3
VSSH supply nominal VSSH -15 V Nominal, ±5% tolerance 3
AVDD supply nominal AVDD 5 V Nominal, ±5% tolerance 3
DVDD supply nominal DVDD 5 V Nominal, ±5% tolerance 3
Thermal Impedance, junction to ambient θJA 44.1 °C/W 9
Thermal Impedance, junction to case θJC 0.28 °C/W 9

CAD (KiCad official)

  • Symbol: ADAS3022BSTZ
  • Footprint: Package_QFP:LQFP-48_7x7mm_P0.5mm
  • 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
  • 3D model files: adas3022bstz-etched.step / adas3022bstz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); adas3022bstz.step / adas3022bstz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (42 pp, sha256 179640c6f2dc5171, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF