component
ADAS3022BSTZ
Public Made by Adomby adom
Analog Devices Analog To Digital Converters (ADCs), LQFP-48(7x7). Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownADAS3022BSTZ
Analog Devices · Analog To Digital Converters (ADCs) · LQFP-48(7x7)
ADAS3022BSTZ from Analog Devices, in a LQFP-48(7x7). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN0 | input | Input Channel 0, referenced to COM in single-ended mode or paired with IN1 as a differential pair. |
| 2 | IN1 | input | Input Channel 1, referenced to COM in single-ended mode or paired with IN0 as a differential pair. |
| 3 | IN2 | input | Input Channel 2, referenced to COM in single-ended mode or paired with IN3 as a differential pair. |
| 4 | IN3 | input | Input Channel 3, referenced to COM in single-ended mode or paired with IN2 as a differential pair. |
| 5 | NIC | unconnected | Not internally connected. |
| 6 | AUX+ | input | Auxiliary input channel positive input; AUX+ and AUX- are not referenced to COM. |
| 7 | IN4 | input | Input Channel 4, referenced to COM in single-ended mode or paired with IN5 as a differential pair. |
| 8 | IN5 | input | Input Channel 5, referenced to COM in single-ended mode or paired with IN4 as a differential pair. |
| 9 | IN6 | input | Input Channel 6, referenced to COM in single-ended mode or paired with IN7 as a differential pair. |
| 10 | IN7 | input | Input Channel 7, referenced to COM in single-ended mode or paired with IN6 as a differential pair. |
| 11 | COM | input | Common channel input to which IN0 to IN7 are referenced; the maximum input voltage on this pin is ±10.24 V for all PGIA gains. |
| 12 | NIC | unconnected | Not internally connected. |
| 13 | CS | input | Active-low chip select that enables the digital interface; tie CS to DGND or CNV for a dedicated serial interface. |
| 14 | DIN | input | Serial data input for the 16-bit configuration (CFG) word, clocked in on SCK rising edges; do not write data during a conversion. |
| 15 | RESET | input | Asynchronous reset; a low-to-high transition aborts any active conversion and resets the CFG register to its default state. |
| 16 | AGND | power_in | Analog ground; connect to the system analog ground plane. |
| 17 | PD | input | Power-down; a low-to-high transition powers down the device, which must be held high until power-on, then wait 100 ms and complete one dummy conversion before converting. |
| 18 | NIC | unconnected | Not internally connected. |
| 19 | SCK | input | Serial clock input; DIN and SDO data are synchronized with SCK. |
| 20 | VIO | power_in | Digital interface supply, recommended to match the host interface supply of 1.8 V, 2.5 V, 3.3 V or 5 V. |
| 21 | SDO | output | Serial data output presenting the conversion result in twos complement format, synchronized to SCK falling edges. |
| 22 | NIC | unconnected | Not internally connected. |
| 23 | BUSY/SDO2 | output | Converter busy output, high during a conversion; when SDO2 is enabled after end of conversion, it outputs the result in twos complement format on SCK falling edges. |
| 24 | CNV | input | Convert input; a conversion initiates on the rising edge of CNV. |
| 25 | DGND | power_in | Digital ground; connect to the system digital ground plane. |
| 26 | DGND | power_in | Digital ground; connect to the system digital ground plane. |
| 27 | AGND | power_in | Analog ground; connect to the system analog ground plane. |
| 28 | AGND | power_in | Analog ground; connect to the system analog ground plane. |
| 29 | DCAP | power_out | Internally regulated 2.5 V digital regulator output; decouple with a 10 µF and a 0.1 µF local capacitor. |
| 30 | ACAP | power_out | Internally regulated 2.5 V analog regulator output supplying the ADC core and analog circuits except the reference; decouple with a 10 µF and a 0.1 µF capacitor. |
| 31 | DVDD | power_in | Digital 5 V supply; decouple with a 10 µF and a 0.1 µF local capacitor. |
| 32 | NIC | unconnected | Not internally connected. |
| 33 | AVDD | power_in | Analog 5 V supply; decouple with a 10 µF and a 0.1 µF local capacitor. |
| 34 | NIC | unconnected | Not internally connected. |
| 35 | NIC | unconnected | Not internally connected. |
| 36 | NIC | unconnected | Not internally connected. |
| 37 | RCAP | power_out | Internally regulated 2.5 V analog regulator output supplying the internal reference; decouple with a 10 µF and a 0.1 µF capacitor. |
| 38 | REFIN | bidirectional | Internal 2.5 V bandgap reference output, reference buffer input, or reference power-down input; REF1 and REF2 must be tied together externally. |
| 39 | REF1 | bidirectional | Reference input/output; requires individual decoupling with an external 10 µF ceramic capacitor placed close to REF1, REF2 and REFN. |
| 40 | REF2 | bidirectional | Reference input/output; requires individual decoupling with an external 10 µF ceramic capacitor placed close to REF1, REF2 and REFN, and must be tied to REF1 externally. |
| 41 | NIC | unconnected | Not internally connected. |
| 42 | RGND | power_in | Reference supply ground; connect to the system analog ground plane. |
| 43 | REFN | power_in | Reference input/output ground; connect the reference capacitors on REF1 and REF2 to REFN, then connect REFN to the analog ground plane. |
| 44 | NIC | unconnected | Not internally connected. |
| 45 | NIC | unconnected | Not internally connected. |
| 46 | VSSH | power_in | High-voltage analog negative supply, nominally −15 V; decouple with a 10 µF and a 0.1 µF local capacitor and connect the exposed pad to VSSH. |
| 47 | VDDH | power_in | High-voltage analog positive supply, nominally +15 V; decouple with a 10 µF and a 0.1 µF local capacitor. |
| 48 | AUX− | input | Auxiliary input channel negative input. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | LQFP-48(7x7) |
| Category | ADC/DAC/Data Conversion |
| Pins | 48 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Differential Input Voltage Range, PGIA gain = 0.16 | VIN | -6 | 6 | VREF | PGIA gain = 0.16, VIN = 49.15 V p-p | 3 | |
| Differential Input Voltage Range, PGIA gain = 0.2 | VIN | -5 | 5 | VREF | PGIA gain = 0.2, VIN = 40.96 V p-p | 3 | |
| Differential Input Voltage Range, PGIA gain = 0.4 | VIN | -2.5 | 2.5 | VREF | PGIA gain = 0.4, VIN = 20.48 V p-p | 3 | |
| Differential Input Voltage Range, PGIA gain = 0.8 | VIN | -1.25 | 1.25 | VREF | PGIA gain = 0.8, VIN = 10.24 V p-p | 3 | |
| Differential Input Voltage Range, PGIA gain = 1.6 | VIN | -0.625 | 0.625 | VREF | PGIA gain = 1.6, VIN = 5.12 V p-p | 3 | |
| Differential Input Voltage Range, PGIA gain = 3.2 | VIN | -0.3125 | 0.3125 | VREF | PGIA gain = 3.2, VIN = 2.56 V p-p | 3 | |
| Differential Input Voltage Range, PGIA gain = 6.4 | VIN | -0.1563 | 0.1563 | VREF | PGIA gain = 6.4, VIN = 1.28 V p-p | 3 | |
| Input Impedance | ZIN | 500 | MΩ | 3 | |||
| Channel Off Leakage | -0.6 | 0.6 | nA | 3 | |||
| Channel On Leakage | -0.02 | 0.02 | nA | 3 | |||
| Common-Mode Voltage Range, PGIA gain = 0.4 | -5.12 | 5.12 | V | VIN+, VIN−; full-scale differential inputs; PGIA gain = 0.4 | 3 | ||
| Common-Mode Voltage Range, PGIA gain = 0.8 | -7.68 | 7.68 | V | VIN+, VIN−; full-scale differential inputs; PGIA gain = 0.8 | 3 | ||
| Common-Mode Voltage Range, PGIA gain = 1.6 | -8.96 | 8.96 | V | VIN+, VIN−; full-scale differential inputs; PGIA gain = 1.6 | 3 | ||
| Common-Mode Voltage Range, PGIA gain = 3.2 | -9.6 | 9.6 | V | VIN+, VIN−; full-scale differential inputs; PGIA gain = 3.2 | 3 | ||
| Common-Mode Voltage Range, PGIA gain = 6.4 | -9.92 | 9.92 | V | VIN+, VIN−; full-scale differential inputs; PGIA gain = 6.4 | 3 | ||
| Conversion Rate, one channel/one pair | 0 | 1000 | kSPS | One channel/one pair | 3 | ||
| Conversion Rate, two channels/two pairs | 0 | 500 | kSPS | Two channels/two pairs | 3 | ||
| Conversion Rate, four channels/four pairs | 0 | 250 | kSPS | Four channels/four pairs | 3 | ||
| Conversion Rate, eight channels | 0 | 125 | kSPS | Eight channels | 3 | ||
| No Missing Codes | 16 | Bits | 3 | ||||
| Gain Error | -9 | 9 | LSB | External reference, all PGIA gains, TA = 25°C | 3 | ||
| Offset Error, PGIA gain = 0.16, 0.2, 0.4, 0.8 | -3 | 0.2 | 3 | LSB | External reference, TA = 25°C | 3 | |
| Offset Error, PGIA gain = 1.6 | -4 | 0.2 | 4 | LSB | External reference, TA = 25°C | 3 | |
| Offset Error, PGIA gain = 3.2 | -7.5 | 0.2 | 7.5 | LSB | External reference, TA = 25°C | 3 | |
| Offset Error, PGIA gain = 6.4 | -12.5 | 0.2 | 12.5 | LSB | External reference, TA = 25°C | 3 | |
| Integral Linearity Error, PGIA gain = 0.16, 0.2, 0.4, 0.8, 1.6 | -2 | 0.6 | 2 | LSB | PGIA gain = 0.16, 0.2, 0.4, 0.8, 1.6 | 3 | |
| Integral Linearity Error, PGIA gain = 3.2 | -3 | 1 | 3 | LSB | PGIA gain = 3.2 | 3 | |
| Integral Linearity Error, PGIA gain = 6.4 | -5 | 1.5 | 5 | LSB | PGIA gain = 6.4 | 3 | |
| Differential Linearity Error, PGIA gain = 0.16, 0.2, 0.4, 0.8, 1.6 | -0.9 | 0.6 | 1 | LSB | PGIA gain = 0.16, 0.2, 0.4, 0.8, 1.6 | 3 | |
| Differential Linearity Error, PGIA gain = 3.2 | -0.9 | 0.75 | 1.25 | LSB | PGIA gain = 3.2 | 3 | |
| Differential Linearity Error, PGIA gain = 6.4 | -0.9 | 0.75 | 1.25 | LSB | PGIA gain = 6.4 | 3 | |
| Operating Temperature Range (industrial) | -40 | 85 | °C | Industrial temperature range; TMIN to TMAX | 1 | ||
| VDDH supply tolerance | VDDH | -5 | 5 | % | VDDH = 15 V ± 5% | 3 | |
| VSSH supply tolerance | VSSH | -5 | 5 | % | VSSH = −15 V ± 5% | 3 | |
| AVDD supply tolerance | AVDD | -5 | 5 | % | AVDD = 5 V ± 5% | 3 | |
| DVDD supply tolerance | DVDD | -5 | 5 | % | DVDD = 5 V ± 5% | 3 | |
| Digital interface supply VIO | VIO | 1.8 | V | VIO = 1.8 V to AVDD | 3 | ||
| AUX+, AUX− to AGND | -0.3 | V | Lower limit only; upper limit is AVDD + 0.3 V | 9 | |||
| REFx to AGND | -0.3 | V | Lower limit AGND − 0.3 V; upper limit is AVDD + 0.3 V | 9 | |||
| REFIN to AGND | -0.3 | 2.7 | V | 9 | |||
| REFN to AGND | -0.3 | 0.3 | V | 9 | |||
| Ground voltage differences AGND, RGND, DGND | -0.3 | 0.3 | V | 9 | |||
| VDDH to AGND | VDDH | -0.3 | 16.5 | V | 9 | ||
| VSSH to AGND | VSSH | -16.5 | 0.3 | V | 9 | ||
| AVDD, DVDD, VIO to AGND | -0.3 | 7 | V | 9 | |||
| ACAP, DCAP, RCAP to GND | -0.3 | 2.7 | V | 9 | |||
| CNV, DIN, SCK, RESET, PD, CS to DGND | -0.3 | V | Lower limit only; upper limit is VIO + 0.3 V | 9 | |||
| SDO, BUSY to DGND | -0.3 | V | Lower limit only; upper limit is VIO + 0.3 V | 9 | |||
| Internal Power Dissipation | 2 | W | 9 | ||||
| Junction Temperature | 125 | °C | 9 | ||||
| Storage Temperature Range | -65 | 125 | °C | 9 | |||
| VDDH supply nominal | VDDH | 15 | V | Nominal, ±5% tolerance | 3 | ||
| VSSH supply nominal | VSSH | -15 | V | Nominal, ±5% tolerance | 3 | ||
| AVDD supply nominal | AVDD | 5 | V | Nominal, ±5% tolerance | 3 | ||
| DVDD supply nominal | DVDD | 5 | V | Nominal, ±5% tolerance | 3 | ||
| Thermal Impedance, junction to ambient | θJA | 44.1 | °C/W | 9 | |||
| Thermal Impedance, junction to case | θJC | 0.28 | °C/W | 9 |
CAD (KiCad official)
- Symbol:
ADAS3022BSTZ - Footprint:
Package_QFP:LQFP-48_7x7mm_P0.5mm - 3D model: LQFP-48(7x7) (KiCad packages3D, STEP)
- 3D model files:
adas3022bstz-etched.step/adas3022bstz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);adas3022bstz.step/adas3022bstz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (42 pp, sha256
179640c6f2dc5171, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).