3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownPIC12F617T-E
Microchip Tech · Microcontrollers (MCU/MPU/SOC) · SOIC-8-150mil
PIC12F617T-E from Microchip Tech, in a SOIC-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VDD | power_in | Positive supply; the PIC12F617 is specified for a 2.0V-5.5V voltage range. |
| 2 | GP5/T1CKI/P1A*/OSC1/CLKIN | bidirectional | General purpose I/O with programmable pull-up and interrupt-on-change, also Timer1 clock input, alternate-pin PWM output P1A, crystal/resonator OSC1 connection, or external clock input/RC oscillator connection CLKIN. |
| 3 | GP4/AN3/CIN1-/T1G/P1B*/OSC2/CLKOUT | bidirectional | General purpose I/O with programmable pull-up and interrupt-on-change, also A/D channel 3 input, comparator inverting input CIN1-, Timer1 gate, alternate-pin PWM output P1B, crystal/resonator OSC2 connection, or FOSC/4 CLKOUT. |
| 4 | GP3/T1G*/MCLR/VPP | input | Input-only pin with interrupt-on-change, configurable as alternate-pin Timer1 gate, Master Clear reset with internal weak pull-up (only when configured as MCLR), or high-voltage programming input VPP. |
| 5 | GP2/AN2/T0CKI/INT/COUT/CCP1/P1A | bidirectional | General purpose I/O with programmable pull-up and interrupt-on-change, also A/D channel 2 input, Timer0 clock input, external interrupt INT, comparator output COUT, and capture input/compare input/PWM output CCP1/P1A. |
| 6 | GP1/AN1/CIN0-/VREF/ICSPCLK | bidirectional | General purpose I/O with programmable pull-up and interrupt-on-change, also A/D channel 1 input, comparator inverting input CIN0-, external A/D voltage reference VREF, or serial programming clock ICSPCLK. |
| 7 | GP0/AN0/CIN+/P1B/ICSPDAT | bidirectional | General purpose I/O with programmable pull-up and interrupt-on-change, also A/D channel 0 input, comparator non-inverting input CIN+, PWM output P1B, or serial programming data I/O ICSPDAT. |
| 8 | VSS | power_in | Ground reference. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOIC-8-150mil |
| Category | Embedded Processors & Controllers |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage | VDD | 2 | 5.5 | V | FOSC <= 4 MHz (D001) | 145 | |
| Supply Voltage | VDD | 3 | 5.5 | V | FOSC <= 10 MHz (D001C) | 145 | |
| Supply Voltage | VDD | 4.5 | 5.5 | V | FOSC <= 20 MHz (D001D) | 145 | |
| RAM Data Retention Voltage | VDR | 1.5 | V | Device in Sleep mode | 145 | ||
| VDD Rise Rate for Power-on Reset | SVDD | 0.05 | V/ms | See Section 12.3.1 | 145 | ||
| Operating temperature (Extended) | TA | -40 | 125 | °C | Extended (-E) | 145 | |
| Supply Current LP mode | IDD | 32 | 51 | µA | FOSC = 32 kHz LP, VDD = 5.0V (D010) | 146 | |
| Supply Current XT mode | IDD | 0.66 | 1 | mA | FOSC = 4 MHz XT, VDD = 5.0V (D012) | 146 | |
| Supply Current INTOSC | IDD | 1.2 | 1.6 | mA | FOSC = 8 MHz INTOSC, VDD = 5.0V (D017) | 146 | |
| Supply Current HS mode | IDD | 2.8 | 3.35 | mA | FOSC = 20 MHz HS, VDD = 5.0V (D019) | 146 | |
| Power-down Base Current | IPD | 0.05 | 4 | µA | VDD = 2.0V, WDT, BOR, Comparator, VREF and T1OSC disabled (D020E) | 149 | |
| Power-down Base Current | IPD | 0.15 | 5 | µA | VDD = 3.0V, WDT, BOR, Comparator, VREF and T1OSC disabled (D020E) | 149 | |
| Power-down Base Current | IPD | 0.35 | 8.5 | µA | VDD = 5.0V, WDT, BOR, Comparator, VREF and T1OSC disabled (D020E) | 149 | |
| WDT Current | IPD | 9.5 | 19 | µA | VDD = 5.0V (D021E) | 149 | |
| BOR Current | IPD | 6 | 19 | µA | VDD = 5.0V (D022E) | 149 | |
| Comparator Current | IPD | 60 | 80 | µA | VDD = 5.0V, single comparator enabled (D023E) | 149 | |
| A/D Current | IPD | 0.36 | 10 | µA | VDD = 5.0V, no conversion in progress (D027E) | 149 | |
| Input Low Voltage, I/O port TTL buffer | VIL | 0.8 | V | 4.5V <= VDD <= 5.5V (D030) | 152 | ||
| Input Low Voltage, I/O port TTL buffer | VIL | 0.15 | V | 2.0V <= VDD <= 4.5V, max is 0.15 VDD (D030A) | 152 | ||
| Input Low Voltage, Schmitt Trigger | VIL | 0.2 | V | 2.0V <= VDD <= 5.5V, max is 0.2 VDD (D031) | 152 | ||
| Input High Voltage, I/O port TTL buffer | VIH | 2 | V | 4.5V <= VDD <= 5.5V (D040) | 152 | ||
| Input High Voltage, Schmitt Trigger | VIH | 0.8 | V | 2.0V <= VDD <= 5.5V, min is 0.8 VDD (D041) | 152 | ||
| Input High Voltage, MCLR | VIH | 0.8 | V | min is 0.8 VDD (D042) | 152 | ||
| Input Leakage Current, I/O ports | IIL | 0.1 | 1 | µA | VSS <= VPIN <= VDD, pin at high-impedance (D060) | 152 | |
| Input Leakage Current, GP3/MCLR | IIL | 0.7 | 5 | µA | VSS <= VPIN <= VDD (D061) | 152 | |
| Input Leakage Current, OSC1 | IIL | 0.1 | 5 | µA | VSS <= VPIN <= VDD, XT, HS and LP oscillator configuration (D063) | 152 | |
| GPIO Weak Pull-up Current | IPUR | 50 | 250 | 400 | µA | VDD = 5.0V, VPIN = VSS (D070) | 152 |
| Output Low Voltage, I/O ports | VOL | 0.6 | V | IOL = 7.0 mA, VDD = 4.5V, -40°C to +125°C | 152 | ||
| Output High Voltage, I/O ports | VOH | 0 | V | VDD - 0.7 min; IOH = -2.5 mA, VDD = 4.5V, -40°C to +125°C | 152 | ||
| Capacitive Loading on OSC2 pin | COSC2 | 15 | pF | In XT, HS and LP modes when external clock is used to drive OSC1 (D101) | 153 | ||
| Capacitive Loading on all I/O pins | CIO | 50 | pF | 153 | |||
| VDD for Bulk Erase/Write | VPEW | 4.5 | 5.5 | V | D132 | 153 | |
| Erase/Write cycle time | TPEW | 2 | 2.5 | ms | D133 | 153 | |
| Characteristic Retention | TRETD | 40 | Year | Provided no other specifications are violated | 153 | ||
| Internal Calibrated INTOSC Frequency 4 MHz | INTOSC | 3.8 | 4 | 4.2 | MHz | 5% tolerance, 2.0V <= VDD <= 5.5V, -40°C <= TA <= +125°C (Ext.) | 157 |
| Internal Calibrated INTOSC Frequency 8 MHz | INTOSC | 7.6 | 8 | 8.4 | MHz | 5% tolerance, 2.0V <= VDD <= 5.5V, -40°C <= TA <= +125°C (Ext.) | 157 |
| Internal Calibrated INTOSC Frequency 8 MHz | INTOSC | 7.92 | 8 | 8.08 | MHz | 1% tolerance, VDD = 3.5V, TA = 25°C | 157 |
| MCLR Pulse Width (low) | TMCL | 5 | µs | VDD = 5V, -40°C to +125°C | 160 | ||
| Watchdog Timer Time-out Period (No Prescaler) | TWDT | 10 | 20 | 35 | ms | VDD = 5V, -40°C to +125°C | 160 |
| Power-up Timer Period | TPWRT | 40 | 65 | 140 | ms | 160 | |
| Brown-out Reset Voltage | VBOR | 2 | 2.15 | 2.3 | V | 160 | |
| Brown-out Reset Minimum Detection Period | TBOR | 100 | µs | VDD <= VBOR | 160 | ||
| Comparator Input Offset Voltage | VOS | 5 | 10 | mV | 162 | ||
| Comparator Input Common Mode Voltage | VCM | 0 | V | max is VDD - 1.5 | 162 | ||
| Comparator Response Time Falling | TRT | 150 | 600 | ns | 162 | ||
| Comparator Response Time Rising | TRT | 200 | 1000 | ns | 162 | ||
| VP6 voltage output | VP6OUT | 0.5 | 0.6 | 0.7 | V | 163 | |
| V1P2 voltage output | V1P2OUT | 1.05 | 1.2 | 1.35 | V | 163 | |
| ADC Resolution | NR | 10 | bits | 164 | |||
| ADC Integral Error | EIL | 1 | LSb | VREF = 5.12V | 164 | ||
| ADC Offset Error | EOFF | 1.5 | 2 | LSb | VREF = 5.12V | 164 | |
| Thermal Resistance Junction to Ambient | θJA | 149.5 | °C/W | 8-pin SOIC package | 154 | ||
| Thermal Resistance Junction to Case | θJC | 39.9 | °C/W | 8-pin SOIC package | 154 | ||
| Die Temperature | TDIE | 150 | °C | 154 | |||
| Voltage on VDD with respect to VSS | VDD | -0.3 | 6.5 | V | 143 | ||
| Voltage on MCLR with respect to VSS | VMCLR | -0.3 | 13.5 | V | 143 | ||
| Voltage on all other pins with respect to VSS | -0.3 | 0.3 | V | max is VDD + 0.3V | 143 | ||
| Storage temperature | TSTG | -65 | 150 | °C | 143 | ||
| Ambient temperature under bias | TA | -40 | 125 | °C | 143 | ||
| Maximum current out of VSS pin | 95 | mA | 143 | ||||
| Maximum current into VDD pin | 95 | mA | 143 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | SN = 8-lead Small Outline (150 mil) (SOIC) MS = Micro Small Outline (MSOP) | 211 |
CAD (KiCad official)
- Symbol:
PIC12F617T-E - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8-150mil (KiCad packages3D, STEP)
- 3D model files:
pic12f617t-e-etched.step/pic12f617t-e-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic12f617t-e.step/pic12f617t-e.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (212 pp, sha256
dc273ef045b5c299, retrieved 2026-10-31, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).