Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC12F617T-E

Microchip Tech · Microcontrollers (MCU/MPU/SOC) · SOIC-8-150mil

PIC12F617T-E from Microchip Tech, in a SOIC-8-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VDD power_in Positive supply; the PIC12F617 is specified for a 2.0V-5.5V voltage range.
2 GP5/T1CKI/P1A*/OSC1/CLKIN bidirectional General purpose I/O with programmable pull-up and interrupt-on-change, also Timer1 clock input, alternate-pin PWM output P1A, crystal/resonator OSC1 connection, or external clock input/RC oscillator connection CLKIN.
3 GP4/AN3/CIN1-/T1G/P1B*/OSC2/CLKOUT bidirectional General purpose I/O with programmable pull-up and interrupt-on-change, also A/D channel 3 input, comparator inverting input CIN1-, Timer1 gate, alternate-pin PWM output P1B, crystal/resonator OSC2 connection, or FOSC/4 CLKOUT.
4 GP3/T1G*/MCLR/VPP input Input-only pin with interrupt-on-change, configurable as alternate-pin Timer1 gate, Master Clear reset with internal weak pull-up (only when configured as MCLR), or high-voltage programming input VPP.
5 GP2/AN2/T0CKI/INT/COUT/CCP1/P1A bidirectional General purpose I/O with programmable pull-up and interrupt-on-change, also A/D channel 2 input, Timer0 clock input, external interrupt INT, comparator output COUT, and capture input/compare input/PWM output CCP1/P1A.
6 GP1/AN1/CIN0-/VREF/ICSPCLK bidirectional General purpose I/O with programmable pull-up and interrupt-on-change, also A/D channel 1 input, comparator inverting input CIN0-, external A/D voltage reference VREF, or serial programming clock ICSPCLK.
7 GP0/AN0/CIN+/P1B/ICSPDAT bidirectional General purpose I/O with programmable pull-up and interrupt-on-change, also A/D channel 0 input, comparator non-inverting input CIN+, PWM output P1B, or serial programming data I/O ICSPDAT.
8 VSS power_in Ground reference.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOIC-8-150mil
Category Embedded Processors & Controllers
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage VDD 2 5.5 V FOSC <= 4 MHz (D001) 145
Supply Voltage VDD 3 5.5 V FOSC <= 10 MHz (D001C) 145
Supply Voltage VDD 4.5 5.5 V FOSC <= 20 MHz (D001D) 145
RAM Data Retention Voltage VDR 1.5 V Device in Sleep mode 145
VDD Rise Rate for Power-on Reset SVDD 0.05 V/ms See Section 12.3.1 145
Operating temperature (Extended) TA -40 125 °C Extended (-E) 145
Supply Current LP mode IDD 32 51 µA FOSC = 32 kHz LP, VDD = 5.0V (D010) 146
Supply Current XT mode IDD 0.66 1 mA FOSC = 4 MHz XT, VDD = 5.0V (D012) 146
Supply Current INTOSC IDD 1.2 1.6 mA FOSC = 8 MHz INTOSC, VDD = 5.0V (D017) 146
Supply Current HS mode IDD 2.8 3.35 mA FOSC = 20 MHz HS, VDD = 5.0V (D019) 146
Power-down Base Current IPD 0.05 4 µA VDD = 2.0V, WDT, BOR, Comparator, VREF and T1OSC disabled (D020E) 149
Power-down Base Current IPD 0.15 5 µA VDD = 3.0V, WDT, BOR, Comparator, VREF and T1OSC disabled (D020E) 149
Power-down Base Current IPD 0.35 8.5 µA VDD = 5.0V, WDT, BOR, Comparator, VREF and T1OSC disabled (D020E) 149
WDT Current IPD 9.5 19 µA VDD = 5.0V (D021E) 149
BOR Current IPD 6 19 µA VDD = 5.0V (D022E) 149
Comparator Current IPD 60 80 µA VDD = 5.0V, single comparator enabled (D023E) 149
A/D Current IPD 0.36 10 µA VDD = 5.0V, no conversion in progress (D027E) 149
Input Low Voltage, I/O port TTL buffer VIL 0.8 V 4.5V <= VDD <= 5.5V (D030) 152
Input Low Voltage, I/O port TTL buffer VIL 0.15 V 2.0V <= VDD <= 4.5V, max is 0.15 VDD (D030A) 152
Input Low Voltage, Schmitt Trigger VIL 0.2 V 2.0V <= VDD <= 5.5V, max is 0.2 VDD (D031) 152
Input High Voltage, I/O port TTL buffer VIH 2 V 4.5V <= VDD <= 5.5V (D040) 152
Input High Voltage, Schmitt Trigger VIH 0.8 V 2.0V <= VDD <= 5.5V, min is 0.8 VDD (D041) 152
Input High Voltage, MCLR VIH 0.8 V min is 0.8 VDD (D042) 152
Input Leakage Current, I/O ports IIL 0.1 1 µA VSS <= VPIN <= VDD, pin at high-impedance (D060) 152
Input Leakage Current, GP3/MCLR IIL 0.7 5 µA VSS <= VPIN <= VDD (D061) 152
Input Leakage Current, OSC1 IIL 0.1 5 µA VSS <= VPIN <= VDD, XT, HS and LP oscillator configuration (D063) 152
GPIO Weak Pull-up Current IPUR 50 250 400 µA VDD = 5.0V, VPIN = VSS (D070) 152
Output Low Voltage, I/O ports VOL 0.6 V IOL = 7.0 mA, VDD = 4.5V, -40°C to +125°C 152
Output High Voltage, I/O ports VOH 0 V VDD - 0.7 min; IOH = -2.5 mA, VDD = 4.5V, -40°C to +125°C 152
Capacitive Loading on OSC2 pin COSC2 15 pF In XT, HS and LP modes when external clock is used to drive OSC1 (D101) 153
Capacitive Loading on all I/O pins CIO 50 pF 153
VDD for Bulk Erase/Write VPEW 4.5 5.5 V D132 153
Erase/Write cycle time TPEW 2 2.5 ms D133 153
Characteristic Retention TRETD 40 Year Provided no other specifications are violated 153
Internal Calibrated INTOSC Frequency 4 MHz INTOSC 3.8 4 4.2 MHz 5% tolerance, 2.0V <= VDD <= 5.5V, -40°C <= TA <= +125°C (Ext.) 157
Internal Calibrated INTOSC Frequency 8 MHz INTOSC 7.6 8 8.4 MHz 5% tolerance, 2.0V <= VDD <= 5.5V, -40°C <= TA <= +125°C (Ext.) 157
Internal Calibrated INTOSC Frequency 8 MHz INTOSC 7.92 8 8.08 MHz 1% tolerance, VDD = 3.5V, TA = 25°C 157
MCLR Pulse Width (low) TMCL 5 µs VDD = 5V, -40°C to +125°C 160
Watchdog Timer Time-out Period (No Prescaler) TWDT 10 20 35 ms VDD = 5V, -40°C to +125°C 160
Power-up Timer Period TPWRT 40 65 140 ms 160
Brown-out Reset Voltage VBOR 2 2.15 2.3 V 160
Brown-out Reset Minimum Detection Period TBOR 100 µs VDD <= VBOR 160
Comparator Input Offset Voltage VOS 5 10 mV 162
Comparator Input Common Mode Voltage VCM 0 V max is VDD - 1.5 162
Comparator Response Time Falling TRT 150 600 ns 162
Comparator Response Time Rising TRT 200 1000 ns 162
VP6 voltage output VP6OUT 0.5 0.6 0.7 V 163
V1P2 voltage output V1P2OUT 1.05 1.2 1.35 V 163
ADC Resolution NR 10 bits 164
ADC Integral Error EIL 1 LSb VREF = 5.12V 164
ADC Offset Error EOFF 1.5 2 LSb VREF = 5.12V 164
Thermal Resistance Junction to Ambient θJA 149.5 °C/W 8-pin SOIC package 154
Thermal Resistance Junction to Case θJC 39.9 °C/W 8-pin SOIC package 154
Die Temperature TDIE 150 °C 154
Voltage on VDD with respect to VSS VDD -0.3 6.5 V 143
Voltage on MCLR with respect to VSS VMCLR -0.3 13.5 V 143
Voltage on all other pins with respect to VSS -0.3 0.3 V max is VDD + 0.3V 143
Storage temperature TSTG -65 150 °C 143
Ambient temperature under bias TA -40 125 °C 143
Maximum current out of VSS pin 95 mA 143
Maximum current into VDD pin 95 mA 143

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin SN = 8-lead Small Outline (150 mil) (SOIC) MS = Micro Small Outline (MSOP) 211

CAD (KiCad official)

  • Symbol: PIC12F617T-E
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8-150mil (KiCad packages3D, STEP)
  • 3D model files: pic12f617t-e-etched.step / pic12f617t-e-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic12f617t-e.step / pic12f617t-e.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (212 pp, sha256 dc273ef045b5c299, retrieved 2026-10-31, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF