3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTPS51219RTER
Texas Instruments · DC-DC Converters · QFN-16-EP(3x3)
TPS51219RTER from Texas Instruments, in a QFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VREF | power_in | 2.0-V ±0.8% voltage reference output with 300-µA maximum current capability. |
| 2 | REFIN | input | Output voltage setting input; accepts 0.5-V to 2.0-V for programmable output voltage control. |
| 3 | GSNS | input | Ground sense input for differential feedback; short to GND if remote sensing not used. |
| 4 | VSNS | input | Voltage sense input for differential output voltage feedback at load point. |
| 5 | COMP | input | Compensation network connection for integrator feedback in control loop. |
| 6 | TRIP | input | Current sensing threshold configuration input with 10-µA source current and 4700-ppm/°C temperature coefficient. |
| 7 | GND | power_in | Analog ground reference; connect to quiet point on system ground plane. |
| 8 | PGND | power_in | Power ground return for low-side gate driver; connect as close as possible to device. |
| 9 | V5 | power_in | 5V power supply for internal circuits and gate drivers; operating range 4.5-V to 5.5-V. |
| 10 | DL | output | Low-side MOSFET gate driver output with source resistance 0.9-2.0 Ω and sink resistance 0.5-1.2 Ω. |
| 11 | DH | output | High-side MOSFET gate driver output with source resistance 1.6-3.0 Ω and sink resistance 0.6-1.5 Ω. |
| 12 | SW | bidirectional | Switching node return and RDS(on) current sense (-) input; voltage range -5V to 30V. |
| 13 | BST | power_in | Bootstrap voltage input for high-side gate driver; absolute maximum -0.3V to 36V. |
| 14 | EN | input | Enable control input with 100-ns debounce; VIH 1.8V, VIL 0.5V, hysteresis 0.25V. |
| 15 | MODE | input | Mode and frequency selection via resistor-to-GND divider with 16.7-µA source current. |
| 16 | PGOOD | tri_state | Open-drain power-good comparator output; indicates when output voltage within ±8% (typ) of target. |
| 17 | Thermal Pad | passive | Thermal pad for heat dissipation; connect directly to system ground plane with multiple vias. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | QFN-16-EP(3x3) |
| Category | Power Management (PMIC) |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input voltage range BST | BST | -0.3 | 36 | V | wrt network ground (note 2) | 2 | |
| Input voltage range BST(3) | BST(3) | -0.3 | 6 | V | wrt SW (note 3) | 2 | |
| Input voltage range SW | SW | -5 | 30 | V | wrt network ground (note 2) | 2 | |
| Input voltage range EN, MODE, TRIP, V5 | EN, MODE, TRIP, V5 | -0.3 | 6 | V | wrt network ground (note 2) | 2 | |
| Input voltage range COMP, REFIN, VSNS | COMP, REFIN, VSNS | -0.3 | 3.6 | V | wrt network ground (note 2) | 2 | |
| Input voltage range GSNS | GSNS | -0.35 | 0.35 | V | wrt network ground (note 2) | 2 | |
| Input voltage range PGND | PGND | -0.3 | 0.3 | V | wrt network ground (note 2) | 2 | |
| Output voltage range DH | DH | -5 | 36 | V | wrt network ground (note 2) | 2 | |
| Output voltage range DH(3) | DH(3) | -0.3 | 6 | V | wrt SW (note 3) | 2 | |
| Output voltage range DL | DL | -0.3 | 6 | V | wrt network ground (note 2) | 2 | |
| Output voltage range PGOOD | PGOOD | -0.3 | 6 | V | wrt network ground (note 2) | 2 | |
| Output voltage range VREF | VREF | -0.3 | 3.6 | V | wrt network ground (note 2) | 2 | |
| Junction temperature range | TJ | 125 | °C | 2 | |||
| Storage temperature range | TSTG | -55 | 150 | °C | 2 | ||
| Supply voltage | V5 | 4.5 | 5.5 | V | 3 | ||
| Input voltage range BST | BST | -0.1 | 33.5 | V | 3 | ||
| Input voltage range BST(1) | BST(1) | -0.1 | 5.5 | V | wrt SW (note 1) | 3 | |
| Input voltage range SW | SW | -3 | 28 | V | 3 | ||
| Input voltage range SW(2) | SW(2) | -4.5 | 28 | V | applied for less than 30% of repetitive period (note 2) | 3 | |
| Input voltage range EN, TRIP, MODE | EN, TRIP, MODE | -0.1 | 5.5 | V | 3 | ||
| Input voltage range REFIN, VSNS, COMP | REFIN, VSNS, COMP | -0.1 | 3.5 | V | 3 | ||
| Input voltage range GSNS | GSNS | -0.3 | 0.3 | V | 3 | ||
| Input voltage range PGND | PGND | -0.1 | 0.1 | V | 3 | ||
| Output voltage range DH | DH | -3 | 33.5 | V | 3 | ||
| Output voltage range DH(1) | DH(1) | -0.1 | 5.5 | V | wrt SW (note 1) | 3 | |
| Output voltage range DH(2) | DH(2) | -4.5 | 33.5 | V | applied for less than 30% of repetitive period (note 2) | 3 | |
| Output voltage range DL | DL | -0.1 | 5.5 | V | 3 | ||
| Output voltage range PGOOD | PGOOD | -0.1 | 5.5 | V | 3 | ||
| Output voltage range VREF | VREF | -0.1 | 3.5 | V | 3 | ||
| Operating free-air temperature | TA | -40 | 85 | °C | 3 | ||
| VREF output voltage tolerance | VVREF(tol) | -0.8 | 0.8 | % | 0 μA ≤ IVREF < 30 μA, TA = 0°C to 85°C | 4 | |
| VREF output voltage tolerance | VVREF(tol) | -1.2 | 1.2 | % | 0 μA ≤ IVREF < 300 μA, TA = –40°C to 85°C | 4 | |
| VREF current limit | IVREF(ocl) | 0.4 | 1 | mA | VVREF-GSNS = 1.7 V | 4 | |
| VSNS regulation voltage tolerance | VVSNS(tol) | -9 | 9 | mV | VREFIN = 0 V, 0°C ≤ TA ≤ 85°C | 4 | |
| VSNS regulation voltage tolerance | VVSNS(tol) | -14 | 14 | mV | VREFIN = 0 V, -40°C ≤ TA ≤ 85°C | 4 | |
| VSNS regulation voltage tolerance | VVSNS(tol) | -5 | 5 | mV | VREFIN = 0.5 V and VREFIN = 2.0 V | 4 | |
| VSNS discharge current | IVSNS(dis) | 5 | 12 | mA | VEN = 0 V, VVSNS = 0.5 V | 4 | |
| DH resistance (source) | RDH | 1.6 | 3 | Ω | Source, IDH = –50 mA | 4 | |
| DH resistance (sink) | RDH | 0.6 | 1.5 | Ω | Sink, IDH = 50 mA | 4 | |
| DL resistance (source) | RDL | 0.9 | 2 | Ω | Source, IDL = –50 mA | 4 | |
| DL resistance (sink) | RDL | 0.5 | 1.2 | Ω | Sink, IDL = 50 mA | 4 | |
| Forward voltage | VFBST | 0.1 | 0.2 | V | VV5-BST, TA = 25°C, IF = 10 mA | 4 | |
| BST leakage current | IBSTLK | 0.01 | 1.5 | μA | TA = 25°C, VBST = 33 V, VSW = 28 V | 4 | |
| V5 UVLO threshold voltage (wake-up) | VUVLO | 4.2 | 4.4 | 4.5 | V | Wake-up | 6 |
| V5 UVLO threshold voltage (shutdown) | VUVLO | 3.7 | 3.9 | 4.1 | V | Shutdown | 6 |
| OVP threshold voltage | VOVP | 118 | 120 | 122 | % | OVP detect voltage | 6 |
| UVP threshold voltage | VUVP | 66 | 68 | 70 | % | UVP detect voltage | 6 |
| TRIP source current | ITRIP | 9 | 10 | 11 | μA | TA = 25°C, VTRIP = 0.4 V, RDS(on) sensing | 5 |
| VTRIP voltage range | VTRIP | 0.2 | 3 | V | RDS(on) sensing | 5 | |
| Current limit threshold | VOCL | 360 | 375 | 390 | mV | VTRIP = 3.0 V, RDS(on) sensing | 5 |
| Current limit threshold | VOCL | 190 | 200 | 210 | mV | VTRIP = 1.6 V, RDS(on) sensing | 5 |
| Current limit threshold | VOCL | 20 | 25 | 30 | mV | VTRIP = 0.2 V, RDS(on) sensing | 5 |
| Junction-to-ambient thermal resistance | θJA | 48.5 | °C/W | 3 | |||
| Junction-to-case (top) thermal resistance | θJCtop | 49.5 | °C/W | 3 | |||
| Junction-to-board thermal resistance | θJB | 22.1 | °C/W | 3 | |||
| Junction-to-top characterization parameter | ψJT | 0.7 | °C/W | 3 | |||
| Junction-to-board characterization parameter | ψJB | 22.1 | °C/W | 3 | |||
| Junction-to-case (bottom) thermal resistance | θJCbot | 7.1 | °C/W | 3 |
CAD (KiCad official)
- Symbol:
TPS51219RTER - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: QFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
tps51219rter-etched.step/tps51219rter-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tps51219rter.step/tps51219rter.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (36 pp, sha256
d6e730c2602800ae, retrieved 2026-09-23, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).