Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

OPA607IDCKR

Texas Instruments · Operational Amplifier · SC-70-6

OPA607IDCKR from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 IN+ input Non-inverting input; the input common-mode voltage range is (VS-) to (VS+) - 1.1 V.
2 VS- power_in Negative supply or ground for single-supply operation; the total supply (VS+) - (VS-) must be 2.2 V to 5.5 V.
3 IN- input Inverting input; input terminals are diode-clamped to the supply rails, and input signals that swing more than 0.5 V beyond the rails should be current-limited to 10 mA or less.
4 OUT output Output; swings to within about 8 mV (12 mV maximum) of the supply rails under a 10 kΩ load, and is high-impedance when the amplifier is powered down.
5 PD input Power-down control: logic high (≥ 0.7 × VS) enables the amplifier and logic low (≤ 0.2 × VS) disables it; the pin can be left floating to keep the amplifier enabled, and its absolute range is (VS-) - 0.5 V to 6 V.
6 VS+ power_in Positive supply; the absolute maximum supply voltage is 6 V and the recommended operating range is 2.2 V to 5.5 V total supply.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SC-70-6
Category Amplifiers/Comparators
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (VS+), (VS-) Vs 6 V 7
PD voltage VPD 6 V 7
Differential input voltage VID -5 5 V 7
Continuous input current II -10 10 mA 7
Continuous output current IO -20 20 mA 7
Maximum junction temperature TJ 150 °C 7
Operating free-air temperature TA -40 125 °C 7
Storage temperature Tstg -65 150 °C 7
Supply voltage (VS+), (VS-) VS 2.2 5.5 V 7
Ambient operating temperature TA -40 25 125 °C 7
Input offset voltage VOS -0.6 0.12 0.6 mV 9
Input offset voltage -0.7 0.12 0.7 mV TA = -40°C to +125°C 9
Input offset voltage drift dVOS/dT -1.5 0.3 1.5 µV/°C TA = -40°C to +125°C 9
Power-supply rejection ratio PSRR 95 120 dB VS = 2.2 V to 5.5 V 9
Common-mode rejection ratio CMRR 90 100 dB (VS-) < VCM < (VS+), 1.1 V 9
Input bias current IB -10 3 10 pA 9
Input offset current IOS -10 3 10 pA 9
Open-loop voltage gain AOL 110 130 dB (VS-) + 400 mV < VOUT < (VS+), 400 mV 9
Output voltage swing from supply rails 8 12 mV 10
Output voltage swing from supply rails 12 mV TA = -40℃ to +125℃ 10
Quiescent current per amplifier IQ 900 1100 µA IO = 0 mA 10
Quiescent current per amplifier 1200 µA IO = 0 mA, TA = -40°C to +125°C 10
Power Down quiescent current per amplifier 750 1000 nA PD = VS- 10
Power Down pin bias current per amplifier -1000 -750 nA PD = VS- 10
Turn-on time delay tON 10 15 µs 10
Thermal resistance, junction-to-ambient (DCK, SC70 6-pin) RθJA 219.7 °C/W 8
Thermal resistance, junction-to-case (top) (DCK, SC70 6-pin) RθJC(top) 182.6 °C/W 8
Thermal resistance, junction-to-board (DCK, SC70 6-pin) RθJB 105.7 °C/W 8
Junction-to-top characterization parameter (DCK, SC70 6-pin) ψJT 87 °C/W 8
Junction-to-board characterization parameter (DCK, SC70 6-pin) ψJB 105.4 °C/W 8

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PA6 PART NUMBER PACKAGE BODY SIZE (NOM) OPA607 1

CAD (KiCad official)

  • Symbol: OPA607IDCKR
  • Footprint: Package_TO_SOT_SMD:SOT-363_SC-70-6
  • 3D model: SC-70-6 (KiCad packages3D, STEP)
  • 3D model files: opa607idckr-etched.step / opa607idckr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); opa607idckr.step / opa607idckr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (52 pp, sha256 cedb53cfd1e28f2c, retrieved 2026-11-10, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF