Generated by kicad-footprint-generator · KiCad file format 20260206
OPA607IDCKR
Texas Instruments · Operational Amplifier · SC-70-6
OPA607IDCKR from Texas Instruments, in a SC-70-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | IN+ | input | Non-inverting input; the input common-mode voltage range is (VS-) to (VS+) - 1.1 V. |
| 2 | VS- | power_in | Negative supply or ground for single-supply operation; the total supply (VS+) - (VS-) must be 2.2 V to 5.5 V. |
| 3 | IN- | input | Inverting input; input terminals are diode-clamped to the supply rails, and input signals that swing more than 0.5 V beyond the rails should be current-limited to 10 mA or less. |
| 4 | OUT | output | Output; swings to within about 8 mV (12 mV maximum) of the supply rails under a 10 kΩ load, and is high-impedance when the amplifier is powered down. |
| 5 | PD | input | Power-down control: logic high (≥ 0.7 × VS) enables the amplifier and logic low (≤ 0.2 × VS) disables it; the pin can be left floating to keep the amplifier enabled, and its absolute range is (VS-) - 0.5 V to 6 V. |
| 6 | VS+ | power_in | Positive supply; the absolute maximum supply voltage is 6 V and the recommended operating range is 2.2 V to 5.5 V total supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SC-70-6 |
| Category | Amplifiers/Comparators |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VS+), (VS-) | Vs | 6 | V | 7 | |||
| PD voltage | VPD | 6 | V | 7 | |||
| Differential input voltage | VID | -5 | 5 | V | 7 | ||
| Continuous input current | II | -10 | 10 | mA | 7 | ||
| Continuous output current | IO | -20 | 20 | mA | 7 | ||
| Maximum junction temperature | TJ | 150 | °C | 7 | |||
| Operating free-air temperature | TA | -40 | 125 | °C | 7 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 7 | ||
| Supply voltage (VS+), (VS-) | VS | 2.2 | 5.5 | V | 7 | ||
| Ambient operating temperature | TA | -40 | 25 | 125 | °C | 7 | |
| Input offset voltage | VOS | -0.6 | 0.12 | 0.6 | mV | 9 | |
| Input offset voltage | -0.7 | 0.12 | 0.7 | mV | TA = -40°C to +125°C | 9 | |
| Input offset voltage drift | dVOS/dT | -1.5 | 0.3 | 1.5 | µV/°C | TA = -40°C to +125°C | 9 |
| Power-supply rejection ratio | PSRR | 95 | 120 | dB | VS = 2.2 V to 5.5 V | 9 | |
| Common-mode rejection ratio | CMRR | 90 | 100 | dB | (VS-) < VCM < (VS+), 1.1 V | 9 | |
| Input bias current | IB | -10 | 3 | 10 | pA | 9 | |
| Input offset current | IOS | -10 | 3 | 10 | pA | 9 | |
| Open-loop voltage gain | AOL | 110 | 130 | dB | (VS-) + 400 mV < VOUT < (VS+), 400 mV | 9 | |
| Output voltage swing from supply rails | 8 | 12 | mV | 10 | |||
| Output voltage swing from supply rails | 12 | mV | TA = -40℃ to +125℃ | 10 | |||
| Quiescent current per amplifier | IQ | 900 | 1100 | µA | IO = 0 mA | 10 | |
| Quiescent current per amplifier | 1200 | µA | IO = 0 mA, TA = -40°C to +125°C | 10 | |||
| Power Down quiescent current per amplifier | 750 | 1000 | nA | PD = VS- | 10 | ||
| Power Down pin bias current per amplifier | -1000 | -750 | nA | PD = VS- | 10 | ||
| Turn-on time delay | tON | 10 | 15 | µs | 10 | ||
| Thermal resistance, junction-to-ambient (DCK, SC70 6-pin) | RθJA | 219.7 | °C/W | 8 | |||
| Thermal resistance, junction-to-case (top) (DCK, SC70 6-pin) | RθJC(top) | 182.6 | °C/W | 8 | |||
| Thermal resistance, junction-to-board (DCK, SC70 6-pin) | RθJB | 105.7 | °C/W | 8 | |||
| Junction-to-top characterization parameter (DCK, SC70 6-pin) | ψJT | 87 | °C/W | 8 | |||
| Junction-to-board characterization parameter (DCK, SC70 6-pin) | ψJB | 105.4 | °C/W | 8 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PA6 | PART NUMBER PACKAGE BODY SIZE (NOM) OPA607 | 1 |
CAD (KiCad official)
- Symbol:
OPA607IDCKR - Footprint:
Package_TO_SOT_SMD:SOT-363_SC-70-6 - 3D model: SC-70-6 (KiCad packages3D, STEP)
- 3D model files:
opa607idckr-etched.step/opa607idckr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);opa607idckr.step/opa607idckr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (52 pp, sha256
cedb53cfd1e28f2c, retrieved 2026-11-10, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).