Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC10F220T-I

Microchip Tech · MICROCHIP · SOT-23-6

PIC10F220T-I from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GP0/AN0/ICSPDAT bidirectional Bidirectional I/O pin (TTL input, CMOS output) with software-programmable weak pull-up and wake-up from Sleep on pin change, also analog input AN0 and the In-Circuit Serial Programming data pin.
2 VSS power_in Ground reference for logic and I/O pins.
3 GP1/AN1/ICSPCLK bidirectional Bidirectional I/O pin (TTL input, CMOS output) with software-programmable weak pull-up and wake-up from Sleep on pin change, also analog input AN1 and the In-Circuit Serial Programming clock pin (Schmitt Trigger input).
4 GP2/T0CKI/FOSC4 bidirectional Bidirectional I/O pin that can also be the Schmitt Trigger clock input to TMR0 (T0CKI) or the CMOS Fosc/4 oscillator output (FOSC4).
5 VDD power_in Positive supply for logic and I/O pins, 2.0V to 5.5V operating range.
6 GP3/MCLR/VPP input Input-only pin with optional weak pull-up and wake-up on pin change; when configured as MCLR it is an active-low Reset, and the voltage on MCLR/VPP must not exceed VDD during normal operation or the device will enter Programming mode (VPP is the programming voltage input).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SOT-23-6
Category Embedded Processors & Controllers
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Ambient temperature under bias (absolute maximum) TA -40 125 °C under bias 53
Storage temperature (absolute maximum) TSTG -65 150 °C 53
Voltage on VDD with respect to VSS (absolute maximum) VDD 0 6.5 V 53
Voltage on MCLR with respect to VSS (absolute maximum) VMCLR 0 13.5 V 53
Voltage on all other pins with respect to VSS (absolute maximum, lower limit) -0.3 V upper limit printed as (VDD + 0.3V), not numeric 53
Input clamp current (absolute maximum) IIK 20 mA VI < 0 or VI > VDD 53
Output clamp current (absolute maximum) IOK 20 mA VO < 0 or VO > VDD 53
Max output current sunk by any I/O pin (absolute maximum) 25 mA 53
Max output current sourced by any I/O pin (absolute maximum) 25 mA 53
Operating ambient temperature, industrial (D001 standard operating conditions) TA -40 85 °C Industrial; standard operating conditions 55
Supply Voltage (D001) VDD 2 5.5 V See Figure 10-1 55
RAM Data Retention Voltage (D002, characterized not tested) VDR 1.5 V Device in Sleep mode 55
VDD Rise Rate to ensure Power-on Reset (D004, characterized not tested) SVDD 0.05 V/ms to ensure Power-on Reset 55
Supply Current IDD (D010) IDD 175 275 µA VDD = 2.0V, Fosc = 4 MHz 55
Supply Current IDD (D010) IDD 0.625 1.1 mA VDD = 5.0V, Fosc = 4 MHz 55
Supply Current IDD (D010) IDD 250 400 µA VDD = 2.0V, Fosc = 8 MHz 55
Supply Current IDD (D010) IDD 0.8 1.5 mA VDD = 5.0V, Fosc = 8 MHz 55
Power-down Current IPD (D020) IPD 0.1 1.2 µA VDD = 2.0V 55
Power-down Current IPD (D020) IPD 1 2.4 µA VDD = 5.0V 55
WDT Current IWDT (D022) IWDT 1 3 µA VDD = 2.0V 55
WDT Current IWDT (D022) IWDT 7 16 µA VDD = 5.0V 55
Input Low Voltage, I/O ports with TTL buffer (D030) VIL 0.8 V For all 4.5 ≤ VDD ≤ 5.5V 57
Input High Voltage, I/O ports with TTL buffer (D040) VIH 2 V 4.5 ≤ VDD ≤ 5.5V 57
I/O port input leakage current (D060) IIL -1 0.1 1 µA Vss ≤ VPIN ≤ VDD, pin at high-impedance 57
GP3/MCLR input leakage current (D061) IIL -5 0.7 5 µA Vss ≤ VPIN ≤ VDD 57
GPIO weak pull-up current (D070) IPUR 50 250 400 µA VDD = 5V, VPIN = VSS 57
Output Low Voltage, I/O ports (D080) VOL 0.6 V IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C 57
Capacitive loading, all I/O pins (D101, design guidance only) 50 pF 57
GP0/GP1 weak pull-up resistance, VDD 2.0 V, -40°C 73 105 186 kΩ VDD = 2.0 V, Temperature -40°C 58
GP0/GP1 weak pull-up resistance, VDD 2.0 V, 85°C 82 123 190 kΩ VDD = 2.0 V, Temperature 85°C 58
GP0/GP1 weak pull-up resistance, VDD 5.5 V, -40°C 15 21 33 kΩ VDD = 5.5 V, Temperature -40°C 58
GP0/GP1 weak pull-up resistance, VDD 5.5 V, 85°C 19 26 35 kΩ VDD = 5.5 V, Temperature 85°C 58
GP3 weak pull-up resistance, VDD 2.0 V, -40°C 63 81 96 kΩ VDD = 2.0 V, Temperature -40°C 58
GP3 weak pull-up resistance, VDD 2.0 V, 85°C 82 96 116 kΩ VDD = 2.0 V, Temperature 85°C 58
GP3 weak pull-up resistance, VDD 5.5 V, -40°C 16 20 22 kΩ VDD = 5.5 V, Temperature -40°C 58
GP3 weak pull-up resistance, VDD 5.5 V, 85°C 24 25 28 kΩ VDD = 5.5 V, Temperature 85°C 58
Internal calibrated INTOSC frequency, 1% tolerance FOSC 3.96 4 4.04 MHz VDD=3.5V @ 25°C 59
Internal calibrated INTOSC frequency, 2% tolerance FOSC 3.92 4 4.08 MHz 2.5V ≤ VDD ≤ 5.5V, 0°C ≤ TA ≤ +85°C (industrial) 59
Internal calibrated INTOSC frequency, 5% tolerance FOSC 3.8 4 4.2 MHz 2.0V ≤ VDD ≤ 5.5V, -40°C ≤ TA ≤ +85°C (industrial) 59
MCLR pulse width (low) (Param 30) TMCL 2 µs VDD = 5V, -40°C to +85°C 60
MCLR pulse width (low) (Param 30) TMCL 5 µs VDD = 5.0V 60
Watchdog Timer time-out period, industrial (Param 31) TWDT 10 18 29 ms VDD = 5.0V (Industrial) 60
Device Reset Timer period, standard, industrial (Param 32) TDRT 0.6 1.125 1.85 ms VDD = 5.0V (Industrial) 60
I/O high-impedance from MCLR low (Param 34) TIOZ 2 µs 60
T0CKI high pulse width, with prescaler (Param 40) Tt0H 10 ns With prescaler 61
T0CKI low pulse width, with prescaler (Param 41) Tt0L 10 ns With prescaler 61
A/D integral error (A03) EIL -1.5 1.5 LSb 62
A/D full-scale range (A05, characterized not tested) EFS 2 5.5 V 62
A/D offset error (A06) EOFF -1.5 1.5 LSb 62
A/D gain error (A07) EGN -1.5 1.5 LSb 62
Recommended impedance of analog voltage source (A30) ZAIN 10 kΩ 62
A/D conversion current, additional IAD (A31, characterized not tested) IAD 120 150 µA 2.0V 62
A/D conversion current, additional IAD (A31, characterized not tested) IAD 200 250 µA 5.0V 62

CAD (KiCad official)

  • Symbol: PIC10F220T-I
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6 (KiCad packages3D, STEP)
  • 3D model files: pic10f220t-i-etched.step / pic10f220t-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic10f220t-i.step / pic10f220t-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (88 pp, sha256 7d42622fea72d272, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF