3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC10F220T-I
Microchip Tech · MICROCHIP · SOT-23-6
PIC10F220T-I from Microchip Tech, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GP0/AN0/ICSPDAT | bidirectional | Bidirectional I/O pin (TTL input, CMOS output) with software-programmable weak pull-up and wake-up from Sleep on pin change, also analog input AN0 and the In-Circuit Serial Programming data pin. |
| 2 | VSS | power_in | Ground reference for logic and I/O pins. |
| 3 | GP1/AN1/ICSPCLK | bidirectional | Bidirectional I/O pin (TTL input, CMOS output) with software-programmable weak pull-up and wake-up from Sleep on pin change, also analog input AN1 and the In-Circuit Serial Programming clock pin (Schmitt Trigger input). |
| 4 | GP2/T0CKI/FOSC4 | bidirectional | Bidirectional I/O pin that can also be the Schmitt Trigger clock input to TMR0 (T0CKI) or the CMOS Fosc/4 oscillator output (FOSC4). |
| 5 | VDD | power_in | Positive supply for logic and I/O pins, 2.0V to 5.5V operating range. |
| 6 | GP3/MCLR/VPP | input | Input-only pin with optional weak pull-up and wake-up on pin change; when configured as MCLR it is an active-low Reset, and the voltage on MCLR/VPP must not exceed VDD during normal operation or the device will enter Programming mode (VPP is the programming voltage input). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SOT-23-6 |
| Category | Embedded Processors & Controllers |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Ambient temperature under bias (absolute maximum) | TA | -40 | 125 | °C | under bias | 53 | |
| Storage temperature (absolute maximum) | TSTG | -65 | 150 | °C | 53 | ||
| Voltage on VDD with respect to VSS (absolute maximum) | VDD | 0 | 6.5 | V | 53 | ||
| Voltage on MCLR with respect to VSS (absolute maximum) | VMCLR | 0 | 13.5 | V | 53 | ||
| Voltage on all other pins with respect to VSS (absolute maximum, lower limit) | -0.3 | V | upper limit printed as (VDD + 0.3V), not numeric | 53 | |||
| Input clamp current (absolute maximum) | IIK | 20 | mA | VI < 0 or VI > VDD | 53 | ||
| Output clamp current (absolute maximum) | IOK | 20 | mA | VO < 0 or VO > VDD | 53 | ||
| Max output current sunk by any I/O pin (absolute maximum) | 25 | mA | 53 | ||||
| Max output current sourced by any I/O pin (absolute maximum) | 25 | mA | 53 | ||||
| Operating ambient temperature, industrial (D001 standard operating conditions) | TA | -40 | 85 | °C | Industrial; standard operating conditions | 55 | |
| Supply Voltage (D001) | VDD | 2 | 5.5 | V | See Figure 10-1 | 55 | |
| RAM Data Retention Voltage (D002, characterized not tested) | VDR | 1.5 | V | Device in Sleep mode | 55 | ||
| VDD Rise Rate to ensure Power-on Reset (D004, characterized not tested) | SVDD | 0.05 | V/ms | to ensure Power-on Reset | 55 | ||
| Supply Current IDD (D010) | IDD | 175 | 275 | µA | VDD = 2.0V, Fosc = 4 MHz | 55 | |
| Supply Current IDD (D010) | IDD | 0.625 | 1.1 | mA | VDD = 5.0V, Fosc = 4 MHz | 55 | |
| Supply Current IDD (D010) | IDD | 250 | 400 | µA | VDD = 2.0V, Fosc = 8 MHz | 55 | |
| Supply Current IDD (D010) | IDD | 0.8 | 1.5 | mA | VDD = 5.0V, Fosc = 8 MHz | 55 | |
| Power-down Current IPD (D020) | IPD | 0.1 | 1.2 | µA | VDD = 2.0V | 55 | |
| Power-down Current IPD (D020) | IPD | 1 | 2.4 | µA | VDD = 5.0V | 55 | |
| WDT Current IWDT (D022) | IWDT | 1 | 3 | µA | VDD = 2.0V | 55 | |
| WDT Current IWDT (D022) | IWDT | 7 | 16 | µA | VDD = 5.0V | 55 | |
| Input Low Voltage, I/O ports with TTL buffer (D030) | VIL | 0.8 | V | For all 4.5 ≤ VDD ≤ 5.5V | 57 | ||
| Input High Voltage, I/O ports with TTL buffer (D040) | VIH | 2 | V | 4.5 ≤ VDD ≤ 5.5V | 57 | ||
| I/O port input leakage current (D060) | IIL | -1 | 0.1 | 1 | µA | Vss ≤ VPIN ≤ VDD, pin at high-impedance | 57 |
| GP3/MCLR input leakage current (D061) | IIL | -5 | 0.7 | 5 | µA | Vss ≤ VPIN ≤ VDD | 57 |
| GPIO weak pull-up current (D070) | IPUR | 50 | 250 | 400 | µA | VDD = 5V, VPIN = VSS | 57 |
| Output Low Voltage, I/O ports (D080) | VOL | 0.6 | V | IOL = 8.5 mA, VDD = 4.5V, -40°C to +85°C | 57 | ||
| Capacitive loading, all I/O pins (D101, design guidance only) | 50 | pF | 57 | ||||
| GP0/GP1 weak pull-up resistance, VDD 2.0 V, -40°C | 73 | 105 | 186 | kΩ | VDD = 2.0 V, Temperature -40°C | 58 | |
| GP0/GP1 weak pull-up resistance, VDD 2.0 V, 85°C | 82 | 123 | 190 | kΩ | VDD = 2.0 V, Temperature 85°C | 58 | |
| GP0/GP1 weak pull-up resistance, VDD 5.5 V, -40°C | 15 | 21 | 33 | kΩ | VDD = 5.5 V, Temperature -40°C | 58 | |
| GP0/GP1 weak pull-up resistance, VDD 5.5 V, 85°C | 19 | 26 | 35 | kΩ | VDD = 5.5 V, Temperature 85°C | 58 | |
| GP3 weak pull-up resistance, VDD 2.0 V, -40°C | 63 | 81 | 96 | kΩ | VDD = 2.0 V, Temperature -40°C | 58 | |
| GP3 weak pull-up resistance, VDD 2.0 V, 85°C | 82 | 96 | 116 | kΩ | VDD = 2.0 V, Temperature 85°C | 58 | |
| GP3 weak pull-up resistance, VDD 5.5 V, -40°C | 16 | 20 | 22 | kΩ | VDD = 5.5 V, Temperature -40°C | 58 | |
| GP3 weak pull-up resistance, VDD 5.5 V, 85°C | 24 | 25 | 28 | kΩ | VDD = 5.5 V, Temperature 85°C | 58 | |
| Internal calibrated INTOSC frequency, 1% tolerance | FOSC | 3.96 | 4 | 4.04 | MHz | VDD=3.5V @ 25°C | 59 |
| Internal calibrated INTOSC frequency, 2% tolerance | FOSC | 3.92 | 4 | 4.08 | MHz | 2.5V ≤ VDD ≤ 5.5V, 0°C ≤ TA ≤ +85°C (industrial) | 59 |
| Internal calibrated INTOSC frequency, 5% tolerance | FOSC | 3.8 | 4 | 4.2 | MHz | 2.0V ≤ VDD ≤ 5.5V, -40°C ≤ TA ≤ +85°C (industrial) | 59 |
| MCLR pulse width (low) (Param 30) | TMCL | 2 | µs | VDD = 5V, -40°C to +85°C | 60 | ||
| MCLR pulse width (low) (Param 30) | TMCL | 5 | µs | VDD = 5.0V | 60 | ||
| Watchdog Timer time-out period, industrial (Param 31) | TWDT | 10 | 18 | 29 | ms | VDD = 5.0V (Industrial) | 60 |
| Device Reset Timer period, standard, industrial (Param 32) | TDRT | 0.6 | 1.125 | 1.85 | ms | VDD = 5.0V (Industrial) | 60 |
| I/O high-impedance from MCLR low (Param 34) | TIOZ | 2 | µs | 60 | |||
| T0CKI high pulse width, with prescaler (Param 40) | Tt0H | 10 | ns | With prescaler | 61 | ||
| T0CKI low pulse width, with prescaler (Param 41) | Tt0L | 10 | ns | With prescaler | 61 | ||
| A/D integral error (A03) | EIL | -1.5 | 1.5 | LSb | 62 | ||
| A/D full-scale range (A05, characterized not tested) | EFS | 2 | 5.5 | V | 62 | ||
| A/D offset error (A06) | EOFF | -1.5 | 1.5 | LSb | 62 | ||
| A/D gain error (A07) | EGN | -1.5 | 1.5 | LSb | 62 | ||
| Recommended impedance of analog voltage source (A30) | ZAIN | 10 | kΩ | 62 | |||
| A/D conversion current, additional IAD (A31, characterized not tested) | IAD | 120 | 150 | µA | 2.0V | 62 | |
| A/D conversion current, additional IAD (A31, characterized not tested) | IAD | 200 | 250 | µA | 5.0V | 62 |
CAD (KiCad official)
- Symbol:
PIC10F220T-I - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6 (KiCad packages3D, STEP)
- 3D model files:
pic10f220t-i-etched.step/pic10f220t-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic10f220t-i.step/pic10f220t-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (88 pp, sha256
7d42622fea72d272, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).