AD7992BRMZ-1 from Analog Devices, in a MSOP-10. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin	Name	Type	Function
1	CONVST	input	Edge-triggered convert start input whose rising edge powers up the part (1 µs power-up time, so the high pulse must be at least 1 µs) and whose falling edge puts the track-and-hold into hold mode and starts a conversion.
2	AGND	power_in	Analog ground reference for all circuitry on the AD7992, to which all analog input signals should be referred.
3	VDD	power_in	Power supply input with a VDD range of 2.7 V to 5.5 V.
4	VIN2/REFIN	input	Analog input 2 in dual-channel mode (D6 = 0, reference from VDD) or external reference input in single-channel mode (D6 = 1) with a 1.2 V to VDD range, which should have 0.1 µF and 1 µF capacitors to AGND.
5	VIN1	input	Analog input 1, a single-ended analog input channel with an input range of 0 V to REFIN.
6	AS	input	Logic input address select that selects one of three I2C addresses (GND, VDD or floating, per Table 6); floating gives address 010 0000.
7	AGND	power_in	Analog ground reference for all circuitry on the AD7992, to which all analog input signals should be referred.
8	ALERT/BUSY	output	Open-drain digital output, selectable as an out-of-range ALERT or a conversion-in-progress BUSY indicator, which requires an external pull-up resistor.
9	SDA	bidirectional	Open-drain serial bus bidirectional data I/O that requires an external pull-up resistor.
10	SCL	input	Serial bus clock digital input, described in the pin table as requiring an external pull-up resistor.

Key specifications

Parameter	Value
Manufacturer	Analog Devices
Package	MSOP-10
Category	Data Converters
Pins	10

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter	Symbol	Min	Typ	Max	Unit	Conditions	Page
Signal-to-Noise + Distortion	SINAD	70.5			dB	FIN = 10 kHz for fSCL 1.7 to 3.4 MHz	3
Signal-to-Noise Ratio	SNR	71			dB	FIN = 10 kHz for fSCL 1.7 to 3.4 MHz	3
Total Harmonic Distortion	THD			-78	dB	FIN = 10 kHz for fSCL 1.7 to 3.4 MHz	3
Peak Harmonic or Spurious Noise	SFDR			-79	dB	FIN = 10 kHz for fSCL 1.7 to 3.4 MHz	3
Aperture Delay				10	ns		3
Integral Nonlinearity	INL	-1	0.2	1	LSB	typ ±0.2 LSB	3
Differential Nonlinearity	DNL	-0.9	0.2	1	LSB	Guaranteed no missed codes to 12 bits; typ ±0.2	3
Offset Error Mode 1		-4		4	LSB	Mode 1 (CONVST mode)	3
Offset Error Mode 2		-6		6	LSB	Mode 2 (command mode)	3
Offset Error Match		-1		1	LSB	Dual-channel mode	3
Gain Error		-2		2	LSB		3
Gain Error Match		-1		1	LSB	Dual-channel mode	3
Analog Input DC Leakage Current		-1		1	µA		3
REFIN Input Voltage Range	REFIN	1.2			V	1.2 to VDD	3
REFIN DC Leakage Current		-1		1	µA		3
Input High Voltage (SDA, SCL)	VINH	0.7			V	0.7 (VDD)	3
Input Low Voltage (SDA, SCL)	VINL			0.3	V	0.3 (VDD)	3
Input Leakage Current (SDA, SCL)	IIN	-1		1	µA	VIN = 0 V or VDD	3
Input Capacitance (SDA, SCL)	CIN			10	pF		3
Input Hysteresis (SDA, SCL)	VHYST	0.1			V	0.1 (VDD)	3
Resolution			12		Bits		3
Second-Order IMD			-90		dB	fa = 10.1 kHz, fb = 9.9 kHz for fSCL 1.7 to 3.4 MHz	3
Third-Order IMD			-90		dB	fa = 10.1 kHz, fb = 9.9 kHz for fSCL 1.7 to 3.4 MHz	3
Aperture Jitter			50		ps		3
Channel-to-Channel Isolation			-90		dB	FIN = 108 Hz	3
Full Power Bandwidth @ 3 dB			11		MHz	@ 3 dB	3
Full Power Bandwidth @ 0.1 dB			2		MHz	@ 0.1 dB	3
Analog Input Capacitance			30		pF		3
REFIN Input Impedance			69		kΩ		3
SDA fall time t10, high speed, CB = 100 pF max	t10	10		80	ns	High speed mode, CB = 100 pF max	6
SDA fall time t10, high speed, CB = 400 pF max	t10	20		160	ns	High speed mode, CB = 400 pF max	6
SCL rise time t11, high speed, CB = 100 pF max	t11	10		40	ns	High speed mode, CB = 100 pF max	6
SCL rise time t11, high speed, CB = 400 pF max	t11	20		80	ns	High speed mode, CB = 400 pF max	6
SCL fall time t12, high speed, CB = 100 pF max	t12	10		40	ns	High speed mode, CB = 100 pF max	6
SCL fall time t12, high speed, CB = 400 pF max	t12	20		80	ns	High speed mode, CB = 400 pF max	6
Suppressed spike pulse width, high speed	tSP	0		10	ns	High speed mode	6
Power-up time	tPOWER-UP		1		µs		6
VDD to GND	VDD	-0.3		7	V	TA = 25°C	7
Reference Input Voltage to GND		-0.3			V	upper limit VDD + 0.3 V	7
Digital Input Voltage to GND		-0.3		7	V		7
Digital Output Voltage to GND		-0.3			V	upper limit VDD + 0.3 V	7
Input Current to Any Pin Except Supplies		-10		10	mA	Transient currents of up to 100 mA do not cause SCR latch-up	7
Operating Temperature Range (B Version)		-40		125	°C		7
Storage Temperature Range		-65		150	°C		7
Junction Temperature				150	°C		7
Thermal Impedance θJA	θJA		200		°C/W	10-Lead MSOP	7
Thermal Impedance θJC	θJC		44		°C/W	10-Lead MSOP	7
Pb-Free Soldering Reflow Temperature				260	°C	Pb-Free, +0	7
ESD				1.5	kV		7
Supply Voltage Range	VDD	2.7		5.5	V	Specified VDD range	3

CAD (KiCad official)

Symbol: AD7992BRMZ-1
Footprint: Package_SO:MSOP-10_3x3mm_P0.5mm
3D model: MSOP-10 (KiCad packages3D, STEP)
3D model files: ad7992brmz-1-etched.step / ad7992brmz-1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad7992brmz-1.step / ad7992brmz-1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

Datasheet: Analog Devices datasheet (28 pp, sha256 dff277b879258363, retrieved 2026-10-30, tier: manufacturer)
Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

AD7992BRMZ-1

Verified AD7992BRMZ-1

Verification log 1 record

3D Model

Symbol & Footprint

Schematic Symbol

PCB Footprint

Datasheet

README