3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSIT8008BC-73-33E-25.000000
SiTime · Programmable Oscillators · SMD2016-4P
SIT8008BC-73-33E-25.000000 from SiTime, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OE/ST/NC | input | Factory-programmed mode pin: in OE mode low disables the output driver to high-Z, in ST mode low enters standby with output weakly pulled low, and in NC mode it has no function; a pull-up of 10 kΩ or less is recommended if it is not externally driven. |
| 2 | GND | power_in | Electrical ground; a 0.1 µF or higher capacitor between VDD and GND is required. |
| 3 | OUT | output | Oscillator clock output, LVCMOS/HCMOS compatible. |
| 4 | VDD | power_in | Power supply voltage; a 0.1 µF or higher capacitor between VDD and GND is required. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | SiTime |
| Package | SMD2016-4P |
| Category | Crystals, Oscillators, Resonators |
| Pins | 4 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (Vdd_3.3 option) | Vdd | 2.97 | 3.3 | 3.63 | V | Vdd_3.3 supply voltage option | 1 |
| Operating temperature range (Extended Commercial, C grade) | T_use | -20 | 70 | °C | Extended Commercial | 1 | |
| Output frequency range | f | 1 | 110 | MHz | 1 | ||
| Current consumption | Idd | 3.8 | 4.5 | mA | No load condition, f = 20 MHz, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY | 1 | |
| OE disable current | I_OD | 4.2 | mA | Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY. OE = GND, Output in high-Z state | 1 | ||
| Standby current (applies if pin 1 is ST mode) | I_std | 2.1 | 4.3 | µA | ST = GND, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY. Output is weakly pulled down | 1 | |
| Duty cycle | DC | 45 | 55 | % | All Vdds. See Duty Cycle definition in Figure 3 and Footnote 6 | 2 | |
| Rise/fall time (20% to 80%) | Tr, Tf | 1 | 2 | ns | 20% - 80% Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3 | 2 | |
| Output high voltage | VOH | 90 | % Vdd | IOH = -4 mA (Vdd_3.0 and Vdd_3.3) | 2 | ||
| Output low voltage | VOL | 10 | % Vdd | IOL = 4 mA (Vdd_3.0 and Vdd_3.3) | 2 | ||
| Input high voltage (pin 1, OE or ST) | VIH | 70 | % Vdd | Pin 1, OE or ST | 2 | ||
| Input low voltage (pin 1, OE or ST) | VIL | 30 | % Vdd | Pin 1, OE or ST | 2 | ||
| Input pull-up impedance | Z_in | 50 | 87 | 150 | kΩ | Pin 1, OE logic high or logic low, or ST logic high | 2 |
| Input pull-up impedance (ST logic low) | Z_in | 2 | MΩ | Pin 1, ST logic low | 2 | ||
| Startup time | T_start | 5 | ms | Measured from the time Vdd reaches its rated minimum value | 2 | ||
| Enable/disable time | T_oe | 130 | ns | f = 110 MHz. For other frequencies, T_oe = 100 ns + 3 * cycles | 2 | ||
| Resume time | T_resume | 5 | ms | Measured from the time ST pin crosses 50% threshold | 2 | ||
| RMS period jitter | T_jitt | 1.8 | 3 | ps | f = 75 MHz, Vdd_1.8, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX | 2 | |
| Peak-to-peak period jitter | T_pk | 12 | 25 | ps | f = 75 MHz, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY | 2 | |
| RMS phase jitter (random), 900 kHz to 7.5 MHz | T_phj | 0.5 | 0.9 | ps | f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz. Vdd_1.8, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX | 2 | |
| RMS phase jitter (random), 12 kHz to 20 MHz | T_phj | 1.3 | 2 | ps | f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz. Vdd_1.8, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX | 2 | |
| Storage temperature | -65 | 150 | °C | 3 | |||
| Supply voltage Vdd | Vdd | -0.5 | 4 | V | 3 | ||
| Electrostatic discharge | 2000 | V | 3 | ||||
| Soldering temperature | 260 | °C | Follow standard Pb free soldering guidelines | 3 | |||
| Junction temperature | 150 | °C | 3 | ||||
| Maximum operating junction temperature | 80 | °C | Maximum operating ambient temperature 70 °C | 3 | |||
| Thermal resistance junction-to-ambient, 4 layer board (2016 package) | JA | 152 | °C/W | 4 Layer Board, 2016 package | 3 | ||
| Thermal resistance junction-to-ambient, 2 layer board (2016 package) | JA | 252 | °C/W | 2 Layer Board, 2016 package | 3 | ||
| Thermal resistance junction-to-case, bottom (2016 package) | JC | 36 | °C/W | Bottom, 2016 package | 3 |
CAD (KiCad official)
- Symbol:
SIT8008BC-73-33E-25.000000 - Footprint:
Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm - 3D model: SMD2016-4P (KiCad packages3D, STEP)
- 3D model files:
sit8008bc-73-33e-25-000000-etched.step/sit8008bc-73-33e-25-000000-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sit8008bc-73-33e-25-000000.step/sit8008bc-73-33e-25-000000.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: SiTime datasheet (18 pp, sha256
fcdbddbb6ff5c9c4, retrieved 2026-10-16, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).