main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sit8008bc-73-33e-25-000000: viewers · Ray
package.json Publish 0.1.0 · Ray
page.json Set visibility: public · Ray
README.md Publish 0.1.0 · Ray
sit8008bc-73-33e-25-000000-etched.glb Publish 0.1.0 · Ray
sit8008bc-73-33e-25-000000-etched.step sit8008bc-73-33e-25-000000: factory component page (tier=lcsc) · Ray
sit8008bc-73-33e-25-000000-hero.glb sit8008bc-73-33e-25-000000: hero GLB from the etched model (keeps the MPN mark) · Ray
sit8008bc-73-33e-25-000000-hero.overlay.json Publish 0.1.0 · Ray
sit8008bc-73-33e-25-000000.glb Publish 0.1.0 · Ray
sit8008bc-73-33e-25-000000.kicad_mod Publish 0.1.0 · Ray
sit8008bc-73-33e-25-000000.kicad_sym Publish 0.1.0 · Ray
sit8008bc-73-33e-25-000000.lbr Publish 0.1.0 · Ray
sit8008bc-73-33e-25-000000.step Publish 0.1.0 · Ray

SIT8008BC-73-33E-25.000000

SiTime · Programmable Oscillators · SMD2016-4P

SIT8008BC-73-33E-25.000000 from SiTime, in a SMD2016-4P. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OE/ST/NC input Factory-programmed mode pin: in OE mode low disables the output driver to high-Z, in ST mode low enters standby with output weakly pulled low, and in NC mode it has no function; a pull-up of 10 kΩ or less is recommended if it is not externally driven.
2 GND power_in Electrical ground; a 0.1 µF or higher capacitor between VDD and GND is required.
3 OUT output Oscillator clock output, LVCMOS/HCMOS compatible.
4 VDD power_in Power supply voltage; a 0.1 µF or higher capacitor between VDD and GND is required.

Key specifications

Parameter Value
Manufacturer SiTime
Package SMD2016-4P
Category Crystals, Oscillators, Resonators
Pins 4

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (Vdd_3.3 option) Vdd 2.97 3.3 3.63 V Vdd_3.3 supply voltage option 1
Operating temperature range (Extended Commercial, C grade) T_use -20 70 °C Extended Commercial 1
Output frequency range f 1 110 MHz 1
Current consumption Idd 3.8 4.5 mA No load condition, f = 20 MHz, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY 1
OE disable current I_OD 4.2 mA Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY. OE = GND, Output in high-Z state 1
Standby current (applies if pin 1 is ST mode) I_std 2.1 4.3 µA ST = GND, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY. Output is weakly pulled down 1
Duty cycle DC 45 55 % All Vdds. See Duty Cycle definition in Figure 3 and Footnote 6 2
Rise/fall time (20% to 80%) Tr, Tf 1 2 ns 20% - 80% Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3 2
Output high voltage VOH 90 % Vdd IOH = -4 mA (Vdd_3.0 and Vdd_3.3) 2
Output low voltage VOL 10 % Vdd IOL = 4 mA (Vdd_3.0 and Vdd_3.3) 2
Input high voltage (pin 1, OE or ST) VIH 70 % Vdd Pin 1, OE or ST 2
Input low voltage (pin 1, OE or ST) VIL 30 % Vdd Pin 1, OE or ST 2
Input pull-up impedance Z_in 50 87 150 kΩ Pin 1, OE logic high or logic low, or ST logic high 2
Input pull-up impedance (ST logic low) Z_in 2 MΩ Pin 1, ST logic low 2
Startup time T_start 5 ms Measured from the time Vdd reaches its rated minimum value 2
Enable/disable time T_oe 130 ns f = 110 MHz. For other frequencies, T_oe = 100 ns + 3 * cycles 2
Resume time T_resume 5 ms Measured from the time ST pin crosses 50% threshold 2
RMS period jitter T_jitt 1.8 3 ps f = 75 MHz, Vdd_1.8, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX 2
Peak-to-peak period jitter T_pk 12 25 ps f = 75 MHz, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX, Vdd_YY 2
RMS phase jitter (random), 900 kHz to 7.5 MHz T_phj 0.5 0.9 ps f = 75 MHz, Integration bandwidth = 900 kHz to 7.5 MHz. Vdd_1.8, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX 2
RMS phase jitter (random), 12 kHz to 20 MHz T_phj 1.3 2 ps f = 75 MHz, Integration bandwidth = 12 kHz to 20 MHz. Vdd_1.8, Vdd_2.5, Vdd_2.8, Vdd_3.0, Vdd_3.3, Vdd_XX 2
Storage temperature -65 150 °C 3
Supply voltage Vdd Vdd -0.5 4 V 3
Electrostatic discharge 2000 V 3
Soldering temperature 260 °C Follow standard Pb free soldering guidelines 3
Junction temperature 150 °C 3
Maximum operating junction temperature 80 °C Maximum operating ambient temperature 70 °C 3
Thermal resistance junction-to-ambient, 4 layer board (2016 package) JA 152 °C/W 4 Layer Board, 2016 package 3
Thermal resistance junction-to-ambient, 2 layer board (2016 package) JA 252 °C/W 2 Layer Board, 2016 package 3
Thermal resistance junction-to-case, bottom (2016 package) JC 36 °C/W Bottom, 2016 package 3

CAD (KiCad official)

  • Symbol: SIT8008BC-73-33E-25.000000
  • Footprint: Crystal:Crystal_SMD_2016-4Pin_2.0x1.6mm
  • 3D model: SMD2016-4P (KiCad packages3D, STEP)
  • 3D model files: sit8008bc-73-33e-25-000000-etched.step / sit8008bc-73-33e-25-000000-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sit8008bc-73-33e-25-000000.step / sit8008bc-73-33e-25-000000.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: SiTime datasheet (18 pp, sha256 fcdbddbb6ff5c9c4, retrieved 2026-10-16, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF