3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownTHS3491IRGTR
Texas Instruments · Operational Amplifier · VQFN-16-EP(3x3)
THS3491IRGTR from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | FB | output | Input side feedback pin, internally connected to amplifier output for feedback network gain and stability control. |
| 2 | NC | unconnected | No internal connection; recommended to tie to ground plane. |
| 3 | VIN- | power_in | Inverting input with 8-18 Ω input impedance; requires 4.1-4.3 V headroom to either supply rail. |
| 4 | VIN+ | power_in | Noninverting input with 50 Ω |
| 5 | GND | power_in | Ground and power supply reference; also serves as PD logic reference for power-down pin thresholds. |
| 6 | TJ_SENSE | output | Junction temperature sense output with 32.4-38 kΩ input impedance; generates 0.915-1.15 V at 25°C with 3.2 mV/°C temperature coefficient. |
| 7 | -VS | power_in | Negative power supply for ±7 V to ±16 V dual supply or GND for 14-32 V single supply operation. |
| 8 | -VS | power_in | Negative power supply for ±7 V to ±16 V dual supply or GND for 14-32 V single supply operation. |
| 9 | NC | unconnected | No internal connection; recommended to tie to ground plane. |
| 10 | VOUT | output | Amplifier output; sources ±420 mA linear output current at ±9.4 V into 24 Ω load. |
| 11 | VOUT | output | Amplifier output; sources ±420 mA linear output current at ±9.4 V into 24 Ω load. |
| 12 | NC | unconnected | No internal connection; recommended to tie to ground plane. |
| 13 | +VS | power_in | Positive power supply for ±7 V to ±16 V dual supply or 14-32 V single supply operation. |
| 14 | +VS | power_in | Positive power supply for ±7 V to ±16 V dual supply or 14-32 V single supply operation. |
| 15 | NC | unconnected | No internal connection; recommended to tie to ground plane. |
| 16 | PD | input | Power-down control input; enable threshold at REF + 1.5 V, disable threshold at REF + 0.8 V. |
| 17 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-16-EP(3x3) |
| Category | Amplifiers/Comparators |
| Pins | 17 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage, (+VS) – (–VS) | (+VS) – (–VS) | 33 | V | 7 | |||
| Supply voltage turnon, turnoff maximum dV/dT | 1 | V/µs | 7 | ||||
| Differential input voltage | -0.5 | 0.5 | V | 7 | |||
| Continuous input current | -10 | 10 | mA | 7 | |||
| Continuous output current | -100 | 100 | mA | 7 | |||
| Junction temperature, maximum | TJ | 150 | °C | 7 | |||
| Junction temperature, continuous operation, long-term reliability | TJ | 125 | °C | Continuous operation, long-term reliability | 7 | ||
| Storage temperature | Tstg | -65 | 150 | °C | 7 | ||
| ESD, human-body model (HBM) | V(ESD) | -2500 | 2500 | V | Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 | 7 | |
| ESD, charged-device model (CDM) | V(ESD) | -1000 | 1000 | V | Charged-device model (CDM), per JEDEC specification JESD22-C101 | 7 | |
| Supply voltage, dual-supply | (+VS) – (–VS) | 7 | 15 | 16 | V | Dual-supply | 7 |
| Supply voltage, single-supply | (+VS) – (–VS) | 14 | 30 | 32 | V | Single-supply | 7 |
| Operating free-air temperature | TA | -40 | 85 | °C | 7 | ||
| Input offset voltage | VOS | -2.5 | 1 | 2.5 | mV | RGT package & DIE sales | 8 |
| Noninverting input bias current | IB+ | -7 | -2 | 7 | µA | 8 | |
| Inverting input bias current | IB- | -20 | -7 | 20 | µA | 8 | |
| Open-loop transimpedance gain | ZOL | 5 | 8 | MΩ | VO = ±10 V, RLOAD = 500 Ω | 8 | |
| Internal trace resistance to feedback pin | RFB_TRACE | 1.1 | 1.5 | 1.9 | Ω | RGT only, pins 10 and 11 to pin 1 | 9 |
| Common-mode rejection ratio | CMRR | 69 | 75 | dB | f = DC | 9 | |
| Headroom to either supply (input) | HRIN | 4.1 | 4.3 | V | CMRR > 60 dB | 9 | |
| Inverting input impedance | ZIN- | 8 | 15 | 18 | Ω | Open-loop measurement | 9 |
| Headroom to either supply (output) | HROUT | 1.2 | 1.5 | 1.7 | V | 9 | |
| Maximum current output, magnitude, both polarities | IoutMAX | 480 | 520 | 550 | mA | RLOAD = 24 Ω, VO = ±12.67 V, magnitude, both polarities | 9 |
| Linear output current | IoutLINEAR | 380 | 420 | mA | RLOAD = 24 Ω, VO = ±9.4 V, ZOL > 1 MΩ, source and sink | 9 | |
| Peak output current in transition | IoutPEAK | 500 | 540 | mA | VO = 0 V, RO < 0.5 Ω, magnitude, both polarities | 9 | |
| Output short-circuit current | ISC | 550 | 620 | mA | VS = ±9 V, VO = ±6 V, magnitude, both polarities | 9 | |
| Quiescent current | IQ | 16.1 | 16.7 | 17.3 | mA | VS = ±15 V, No load | 9 |
| Quiescent current | IQ | 16.2 | 16.8 | 17.4 | mA | VS = ±16 V, No load | 9 |
| Quiescent current | IQ | 15.2 | 15.8 | 16.3 | mA | VS = ±7 V, No load | 9 |
| Positive power supply rejection ratio | PSRR+ | 78 | 82 | dB | +VS ± 1.5 V, –VS | 9 | |
| Negative power supply rejection ratio | PSRR– | 77 | 80 | dB | +VS, –VS ± 1.5 V | 9 | |
| REF pin bias current | IREF_BIAS | 35 | 46 | 52 | µA | REF = 0 V, PD = REF + 3 V, positive out of the pin. | 9 |
| PD pin low input bias current | PD LOW_BIAS | 17 | 21 | 25 | µA | PD = REF = GND, positive out of the pin. | 9 |
| PD pin high input bias current | PD HIGH_BIAS | -1 | 0 | 1 | µA | PD = REF + 3 V, REF = GND, positive out of the pin. | 9 |
| +VS disabled supply current | IQ_OFF_+VS | 650 | 780 | 880 | µA | 9 | |
| –VS disabled supply current | IQ_OFF_–VS | 600 | 723 | 820 | µA | 9 | |
| TJ_SENSE 25°C value | TJ_SENSE | 0.915 | 1.06 | 1.15 | V | Device disabled (22°C to 32°C ATE ambient temperature) | 10 |
| TJ_SENSE input impedance | 32.4 | 35 | 38 | kΩ | Internally connected to REF pin | 10 | |
| Junction-to-ambient thermal resistance (RGT) | RθJA | 49.6 | °C/W | 7 | |||
| Junction-to-case (top) thermal resistance (RGT) | RθJC(top) | 55.4 | °C/W | 7 | |||
| Junction-to-board thermal resistance (RGT) | RθJB | 23.1 | °C/W | 7 | |||
| Junction-to-top characterization parameter (RGT) | ψJT | 1.8 | °C/W | 7 | |||
| Junction-to-board characterization parameter (RGT) | ψJB | 23.2 | °C/W | 7 | |||
| Junction-to-case (bottom) thermal resistance (RGT) | RθJC(bot) | 7.8 | °C/W | 7 |
CAD (KiCad official)
- Symbol:
THS3491IRGTR - Footprint:
Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm - 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
- 3D model files:
ths3491irgtr-etched.step/ths3491irgtr-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ths3491irgtr.step/ths3491irgtr.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (56 pp, sha256
0efd0b60aa999c61, retrieved 2026-09-24, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.2, primaryclaude-haiku-4-5-20251001(text), consensusclaude-sonnet-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).