main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs ths3491irgtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
viewers ths3491irgtr: viewers · Ray
package.json ths3491irgtr: component.models_3d pose record per STEP (Z-up, seated z=0, pad-centre origin, identity binding) · Ray
page.json ths3491irgtr: specified limits as data (metadata.characteristics, 44 rows from the datasheet) · Ray
README.md ths3491irgtr: specified limits as data (metadata.characteristics, 44 rows from the datasheet) · Ray
ths3491irgtr-etched.fit.json ths3491irgtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ths3491irgtr-etched.glb ths3491irgtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ths3491irgtr-etched.step ths3491irgtr: re-etch, flat white mark read from pin 1 (service-occt 1.4.0) + chip hero · Ray
ths3491irgtr.glb Publish 0.1.0 · Ray
ths3491irgtr.kicad_mod Publish 0.1.0 · Ray
ths3491irgtr.kicad_sym Publish 0.1.0 · Ray
ths3491irgtr.lbr Publish 0.1.0 · Ray
ths3491irgtr.step Publish 0.1.0 · Ray

THS3491IRGTR

Texas Instruments · Operational Amplifier · VQFN-16-EP(3x3)

THS3491IRGTR from Texas Instruments, in a VQFN-16-EP(3x3). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 FB output Input side feedback pin, internally connected to amplifier output for feedback network gain and stability control.
2 NC unconnected No internal connection; recommended to tie to ground plane.
3 VIN- power_in Inverting input with 8-18 Ω input impedance; requires 4.1-4.3 V headroom to either supply rail.
4 VIN+ power_in Noninverting input with 50 Ω
5 GND power_in Ground and power supply reference; also serves as PD logic reference for power-down pin thresholds.
6 TJ_SENSE output Junction temperature sense output with 32.4-38 kΩ input impedance; generates 0.915-1.15 V at 25°C with 3.2 mV/°C temperature coefficient.
7 -VS power_in Negative power supply for ±7 V to ±16 V dual supply or GND for 14-32 V single supply operation.
8 -VS power_in Negative power supply for ±7 V to ±16 V dual supply or GND for 14-32 V single supply operation.
9 NC unconnected No internal connection; recommended to tie to ground plane.
10 VOUT output Amplifier output; sources ±420 mA linear output current at ±9.4 V into 24 Ω load.
11 VOUT output Amplifier output; sources ±420 mA linear output current at ±9.4 V into 24 Ω load.
12 NC unconnected No internal connection; recommended to tie to ground plane.
13 +VS power_in Positive power supply for ±7 V to ±16 V dual supply or 14-32 V single supply operation.
14 +VS power_in Positive power supply for ±7 V to ±16 V dual supply or 14-32 V single supply operation.
15 NC unconnected No internal connection; recommended to tie to ground plane.
16 PD input Power-down control input; enable threshold at REF + 1.5 V, disable threshold at REF + 0.8 V.
17 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-16-EP(3x3)
Category Amplifiers/Comparators
Pins 17

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage, (+VS) – (–VS) (+VS) – (–VS) 33 V 7
Supply voltage turnon, turnoff maximum dV/dT 1 V/µs 7
Differential input voltage -0.5 0.5 V 7
Continuous input current -10 10 mA 7
Continuous output current -100 100 mA 7
Junction temperature, maximum TJ 150 °C 7
Junction temperature, continuous operation, long-term reliability TJ 125 °C Continuous operation, long-term reliability 7
Storage temperature Tstg -65 150 °C 7
ESD, human-body model (HBM) V(ESD) -2500 2500 V Human-body model (HBM), per ANSI/ESDA/JEDEC JS-001 7
ESD, charged-device model (CDM) V(ESD) -1000 1000 V Charged-device model (CDM), per JEDEC specification JESD22-C101 7
Supply voltage, dual-supply (+VS) – (–VS) 7 15 16 V Dual-supply 7
Supply voltage, single-supply (+VS) – (–VS) 14 30 32 V Single-supply 7
Operating free-air temperature TA -40 85 °C 7
Input offset voltage VOS -2.5 1 2.5 mV RGT package & DIE sales 8
Noninverting input bias current IB+ -7 -2 7 µA 8
Inverting input bias current IB- -20 -7 20 µA 8
Open-loop transimpedance gain ZOL 5 8 MΩ VO = ±10 V, RLOAD = 500 Ω 8
Internal trace resistance to feedback pin RFB_TRACE 1.1 1.5 1.9 Ω RGT only, pins 10 and 11 to pin 1 9
Common-mode rejection ratio CMRR 69 75 dB f = DC 9
Headroom to either supply (input) HRIN 4.1 4.3 V CMRR > 60 dB 9
Inverting input impedance ZIN- 8 15 18 Ω Open-loop measurement 9
Headroom to either supply (output) HROUT 1.2 1.5 1.7 V 9
Maximum current output, magnitude, both polarities IoutMAX 480 520 550 mA RLOAD = 24 Ω, VO = ±12.67 V, magnitude, both polarities 9
Linear output current IoutLINEAR 380 420 mA RLOAD = 24 Ω, VO = ±9.4 V, ZOL > 1 MΩ, source and sink 9
Peak output current in transition IoutPEAK 500 540 mA VO = 0 V, RO < 0.5 Ω, magnitude, both polarities 9
Output short-circuit current ISC 550 620 mA VS = ±9 V, VO = ±6 V, magnitude, both polarities 9
Quiescent current IQ 16.1 16.7 17.3 mA VS = ±15 V, No load 9
Quiescent current IQ 16.2 16.8 17.4 mA VS = ±16 V, No load 9
Quiescent current IQ 15.2 15.8 16.3 mA VS = ±7 V, No load 9
Positive power supply rejection ratio PSRR+ 78 82 dB +VS ± 1.5 V, –VS 9
Negative power supply rejection ratio PSRR– 77 80 dB +VS, –VS ± 1.5 V 9
REF pin bias current IREF_BIAS 35 46 52 µA REF = 0 V, PD = REF + 3 V, positive out of the pin. 9
PD pin low input bias current PD LOW_BIAS 17 21 25 µA PD = REF = GND, positive out of the pin. 9
PD pin high input bias current PD HIGH_BIAS -1 0 1 µA PD = REF + 3 V, REF = GND, positive out of the pin. 9
+VS disabled supply current IQ_OFF_+VS 650 780 880 µA 9
–VS disabled supply current IQ_OFF_–VS 600 723 820 µA 9
TJ_SENSE 25°C value TJ_SENSE 0.915 1.06 1.15 V Device disabled (22°C to 32°C ATE ambient temperature) 10
TJ_SENSE input impedance 32.4 35 38 kΩ Internally connected to REF pin 10
Junction-to-ambient thermal resistance (RGT) RθJA 49.6 °C/W 7
Junction-to-case (top) thermal resistance (RGT) RθJC(top) 55.4 °C/W 7
Junction-to-board thermal resistance (RGT) RθJB 23.1 °C/W 7
Junction-to-top characterization parameter (RGT) ψJT 1.8 °C/W 7
Junction-to-board characterization parameter (RGT) ψJB 23.2 °C/W 7
Junction-to-case (bottom) thermal resistance (RGT) RθJC(bot) 7.8 °C/W 7

CAD (KiCad official)

  • Symbol: THS3491IRGTR
  • Footprint: Package_DFN_QFN:QFN-16-1EP_3x3mm_P0.5mm_EP1.7x1.7mm
  • 3D model: VQFN-16-EP(3x3) (KiCad packages3D, STEP)
  • 3D model files: ths3491irgtr-etched.step / ths3491irgtr-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ths3491irgtr.step / ths3491irgtr.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (56 pp, sha256 0efd0b60aa999c61, retrieved 2026-09-24, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.2, primary claude-haiku-4-5-20251001 (text), consensus claude-sonnet-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF