Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

STC15F204EA-35I-SOP28

STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil

STC15F204EA-35I-SOP28 from STC Micro, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 P2.6 bidirectional Standard I/O port PORT2[6], configurable as quasi-bidirectional, push-pull, input-only or open-drain with up to 20mA sink.
2 P2.7 bidirectional Standard I/O port PORT2[7], configurable as quasi-bidirectional, push-pull, input-only or open-drain with up to 20mA sink.
3 P1.0/ADC0 bidirectional Standard I/O port PORT1[0] or ADC input channel 0; for ADC use set it to open-drain or high-impedance input.
4 P1.1/ADC1 bidirectional Standard I/O port PORT1[1] or ADC input channel 1; for ADC use set it to open-drain or high-impedance input.
5 P1.2/ADC2 bidirectional Standard I/O port PORT1[2] or ADC input channel 2; for ADC use set it to open-drain or high-impedance input.
6 P1.3/ADC3 bidirectional Standard I/O port PORT1[3] or ADC input channel 3; for ADC use set it to open-drain or high-impedance input.
7 P1.4/ADC4 bidirectional Standard I/O port PORT1[4] or ADC input channel 4; for ADC use set it to open-drain or high-impedance input.
8 P1.5/ADC5 bidirectional Standard I/O port PORT1[5] or ADC input channel 5; for ADC use set it to open-drain or high-impedance input.
9 P1.6/ADC6 bidirectional Standard I/O port PORT1[6] or ADC input channel 6; for ADC use set it to open-drain or high-impedance input.
10 P1.7/ADC7 bidirectional Standard I/O port PORT1[7] or ADC input channel 7; for ADC use set it to open-drain or high-impedance input.
11 P0.0/RST/IRC_CLKO bidirectional Standard I/O port PORT0[0] by default, can be set via ISP programming as the reset input (high for at least 24 clocks plus 10us resets), or outputs the internal R/C clock at IRC_CLK/1 or IRC_CLK/2.
12 Vcc power_in Positive power supply (5.5V to 3.8V for the STC15F series).
13 P0.1 bidirectional Standard I/O port PORT0[1].
14 Gnd power_in Negative power supply, ground.
15 P3.0/INT4 bidirectional Standard I/O port PORT3[0] or external interrupt 4, falling-edge only, supports power-down wake-up (also ISP serial RxD).
16 P3.1 bidirectional Standard I/O port PORT3[1] (also ISP serial TxD).
17 P3.2/INT0 bidirectional Standard I/O port PORT3[2] or external interrupt 0, rising and falling edge (falling only if IT0=1), supports power-down wake-up.
18 P3.3/INT1 bidirectional Standard I/O port PORT3[3] or external interrupt 1, rising and falling edge (falling only if IT1=1), supports power-down wake-up.
19 P3.4/T0/CLKOUT1 bidirectional Standard I/O port PORT3[4], timer/counter 0 external input, or timer 1 clock output CLKOUT1 enabled by INT_CLKO[1]/T1CLKO.
20 P3.5/T1/CLKOUT0 bidirectional Standard I/O port PORT3[5], timer/counter 1 external input, or timer 0 clock output CLKOUT0 enabled by INT_CLKO[0]/T0CLKO.
21 P3.6/INT2 bidirectional Standard I/O port PORT3[6] or external interrupt 2, falling-edge only, supports power-down wake-up.
22 P3.7/INT3 bidirectional Standard I/O port PORT3[7] or external interrupt 3, falling-edge only, supports power-down wake-up.
23 P2.0/RSTOUT_LOW bidirectional Standard I/O port PORT2[0] that outputs low after power-up and during reset; software can set it high or low, and set it high before reading external state.
24 P2.1 bidirectional Standard I/O port PORT2[1].
25 P2.2 bidirectional Standard I/O port PORT2[2].
26 P2.3 bidirectional Standard I/O port PORT2[3].
27 P2.4 bidirectional Standard I/O port PORT2[4].
28 P2.5 bidirectional Standard I/O port PORT2[5].

Key specifications

Parameter Value
Manufacturer STC Micro
Package SOIC-28-300mil
Category Embedded Processors & Controllers
Pins 28

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Storage temperature TST -55 125 ℃ 343
Operating temperature (I) TA -40 85 ℃ Industrial grade (I) 343
DC power supply (5V) VDD - VSS -0.3 5.5 V 5V MCU 343
Voltage on any pin -0.3 V max printed as VCC + 0.3 343
Operating Voltage VDD 3.3 5 5.5 V 5V MCU 343
Power Down Current IPD 0.1 uA 5V; typ printed as < 0.1 343
Idle Current IIDL 3 mA 5V 343
Operating Current ICC 4 20 mA 5V 343
Input Low (P0,P1,P2,P3) VIL1 0.8 V 5V 343
Input High (P0,P1,P2,P3) VIH1 2 V 5V 343
Input High (RESET) VIH2 2.2 V 5V 343
Sink Current for output low (P0,P1,P2,P3) IOL1 20 mA 5V@Vpin=0.45V 343
Sourcing Current for output high (Quasi-output) IOH1 200 270 uA 5V 343
Sourcing Current for output high (Push-Pull, Strong-output) IOH2 20 mA 5V@Vpin=2.4V 343
Logic 0 input current (P0,P1,P2,P3) IIL 50 uA Vpin=0V 343
Logic 1 to 0 transition current (P0,P1,P2,P3) ITL 100 270 600 uA Vpin=2.0V 343

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
housing PC Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the 151

CAD (KiCad official)

  • Symbol: STC15F204EA-35I-SOP28
  • Footprint: Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm
  • 3D model: SOIC-28-300mil, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 2.65 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: stc15f204ea-35i-sop28-etched.step / stc15f204ea-35i-sop28-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); stc15f204ea-35i-sop28.step / stc15f204ea-35i-sop28.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: STC Micro datasheet (366 pp, sha256 085aa997330090d1, retrieved 2026-11-12, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF