Generated by kicad-footprint-generator · KiCad file format 20260206
STC15F204EA-35I-SOP28
STC Micro · Microcontroller Units (MCUs/MPUs/SOCs) · SOIC-28-300mil
STC15F204EA-35I-SOP28 from STC Micro, in a SOIC-28-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | P2.6 | bidirectional | Standard I/O port PORT2[6], configurable as quasi-bidirectional, push-pull, input-only or open-drain with up to 20mA sink. |
| 2 | P2.7 | bidirectional | Standard I/O port PORT2[7], configurable as quasi-bidirectional, push-pull, input-only or open-drain with up to 20mA sink. |
| 3 | P1.0/ADC0 | bidirectional | Standard I/O port PORT1[0] or ADC input channel 0; for ADC use set it to open-drain or high-impedance input. |
| 4 | P1.1/ADC1 | bidirectional | Standard I/O port PORT1[1] or ADC input channel 1; for ADC use set it to open-drain or high-impedance input. |
| 5 | P1.2/ADC2 | bidirectional | Standard I/O port PORT1[2] or ADC input channel 2; for ADC use set it to open-drain or high-impedance input. |
| 6 | P1.3/ADC3 | bidirectional | Standard I/O port PORT1[3] or ADC input channel 3; for ADC use set it to open-drain or high-impedance input. |
| 7 | P1.4/ADC4 | bidirectional | Standard I/O port PORT1[4] or ADC input channel 4; for ADC use set it to open-drain or high-impedance input. |
| 8 | P1.5/ADC5 | bidirectional | Standard I/O port PORT1[5] or ADC input channel 5; for ADC use set it to open-drain or high-impedance input. |
| 9 | P1.6/ADC6 | bidirectional | Standard I/O port PORT1[6] or ADC input channel 6; for ADC use set it to open-drain or high-impedance input. |
| 10 | P1.7/ADC7 | bidirectional | Standard I/O port PORT1[7] or ADC input channel 7; for ADC use set it to open-drain or high-impedance input. |
| 11 | P0.0/RST/IRC_CLKO | bidirectional | Standard I/O port PORT0[0] by default, can be set via ISP programming as the reset input (high for at least 24 clocks plus 10us resets), or outputs the internal R/C clock at IRC_CLK/1 or IRC_CLK/2. |
| 12 | Vcc | power_in | Positive power supply (5.5V to 3.8V for the STC15F series). |
| 13 | P0.1 | bidirectional | Standard I/O port PORT0[1]. |
| 14 | Gnd | power_in | Negative power supply, ground. |
| 15 | P3.0/INT4 | bidirectional | Standard I/O port PORT3[0] or external interrupt 4, falling-edge only, supports power-down wake-up (also ISP serial RxD). |
| 16 | P3.1 | bidirectional | Standard I/O port PORT3[1] (also ISP serial TxD). |
| 17 | P3.2/INT0 | bidirectional | Standard I/O port PORT3[2] or external interrupt 0, rising and falling edge (falling only if IT0=1), supports power-down wake-up. |
| 18 | P3.3/INT1 | bidirectional | Standard I/O port PORT3[3] or external interrupt 1, rising and falling edge (falling only if IT1=1), supports power-down wake-up. |
| 19 | P3.4/T0/CLKOUT1 | bidirectional | Standard I/O port PORT3[4], timer/counter 0 external input, or timer 1 clock output CLKOUT1 enabled by INT_CLKO[1]/T1CLKO. |
| 20 | P3.5/T1/CLKOUT0 | bidirectional | Standard I/O port PORT3[5], timer/counter 1 external input, or timer 0 clock output CLKOUT0 enabled by INT_CLKO[0]/T0CLKO. |
| 21 | P3.6/INT2 | bidirectional | Standard I/O port PORT3[6] or external interrupt 2, falling-edge only, supports power-down wake-up. |
| 22 | P3.7/INT3 | bidirectional | Standard I/O port PORT3[7] or external interrupt 3, falling-edge only, supports power-down wake-up. |
| 23 | P2.0/RSTOUT_LOW | bidirectional | Standard I/O port PORT2[0] that outputs low after power-up and during reset; software can set it high or low, and set it high before reading external state. |
| 24 | P2.1 | bidirectional | Standard I/O port PORT2[1]. |
| 25 | P2.2 | bidirectional | Standard I/O port PORT2[2]. |
| 26 | P2.3 | bidirectional | Standard I/O port PORT2[3]. |
| 27 | P2.4 | bidirectional | Standard I/O port PORT2[4]. |
| 28 | P2.5 | bidirectional | Standard I/O port PORT2[5]. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | STC Micro |
| Package | SOIC-28-300mil |
| Category | Embedded Processors & Controllers |
| Pins | 28 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Storage temperature | TST | -55 | 125 | ℃ | 343 | ||
| Operating temperature (I) | TA | -40 | 85 | ℃ | Industrial grade (I) | 343 | |
| DC power supply (5V) | VDD - VSS | -0.3 | 5.5 | V | 5V MCU | 343 | |
| Voltage on any pin | -0.3 | V | max printed as VCC + 0.3 | 343 | |||
| Operating Voltage | VDD | 3.3 | 5 | 5.5 | V | 5V MCU | 343 |
| Power Down Current | IPD | 0.1 | uA | 5V; typ printed as < 0.1 | 343 | ||
| Idle Current | IIDL | 3 | mA | 5V | 343 | ||
| Operating Current | ICC | 4 | 20 | mA | 5V | 343 | |
| Input Low (P0,P1,P2,P3) | VIL1 | 0.8 | V | 5V | 343 | ||
| Input High (P0,P1,P2,P3) | VIH1 | 2 | V | 5V | 343 | ||
| Input High (RESET) | VIH2 | 2.2 | V | 5V | 343 | ||
| Sink Current for output low (P0,P1,P2,P3) | IOL1 | 20 | mA | 5V@Vpin=0.45V | 343 | ||
| Sourcing Current for output high (Quasi-output) | IOH1 | 200 | 270 | uA | 5V | 343 | |
| Sourcing Current for output high (Push-Pull, Strong-output) | IOH2 | 20 | mA | 5V@Vpin=2.4V | 343 | ||
| Logic 0 input current (P0,P1,P2,P3) | IIL | 50 | uA | Vpin=0V | 343 | ||
| Logic 1 to 0 transition current (P0,P1,P2,P3) | ITL | 100 | 270 | 600 | uA | Vpin=2.0V | 343 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| housing | PC | Accumulator contents and the contents of a sixteen-bit base register, which may be either the Data Pointer or the PC. In the latter case, the PC is incremented to the address of the | 151 |
CAD (KiCad official)
- Symbol:
STC15F204EA-35I-SOP28 - Footprint:
Package_SO:SOIC-28W_7.5x17.9mm_P1.27mm - 3D model: SOIC-28-300mil, generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 2.65 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
stc15f204ea-35i-sop28-etched.step/stc15f204ea-35i-sop28-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);stc15f204ea-35i-sop28.step/stc15f204ea-35i-sop28.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: STC Micro datasheet (366 pp, sha256
085aa997330090d1, retrieved 2026-11-12, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).