3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownMSP430FR2476TRHAT
Texas Instruments · Microcontrollers (MCU/MPU/SOC) · VQFN-40-EP(6x6)
MSP430FR2476TRHAT from Texas Instruments, in a VQFN-40-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DVCC | power_in | Primary supply pin for the digital I/O; recommended supply voltage is 1.8 V to 3.6 V with a 10-µF capacitor at DVCC. |
| 2 | RST/NMI/SBWTDIO | bidirectional | Reset input (pullup enabled by default), NMI input, and Spy-Bi-Wire data input/output; unused pins should use a 47-kΩ pullup to DVCC with a 10-nF pulldown. |
| 3 | TEST/SBWTCK | input | Test mode pin and Spy-Bi-Wire input clock; the pin always has an internal pulldown enabled and is left open when unused. |
| 4 | P1.4/UCA0TXD/UCA0SIMO/TA1.2/TCK/A4/VREF+ | bidirectional | General-purpose I/O with port interrupt and wake from LPMx.5; also eUSCI_A0 transmit or SIMO, Timer TA1.2, JTAG TCK, ADC input A4, and VREF+ output. |
| 5 | P1.5/UCA0RXD/UCA0SOMI/TA1.1/TMS/A5 | bidirectional | General-purpose I/O with port interrupt and wake from LPMx.5; also eUSCI_A0 receive or SOMI, Timer TA1.1, JTAG TMS, and ADC input A5. |
| 6 | P1.6/UCA0CLK/TA1CLK/TDI/TCLK/A6 | bidirectional | General-purpose I/O with port interrupt and wake from LPMx.5; also eUSCI_A0 clock, Timer TA1CLK, JTAG TDI/TCLK, and ADC input A6. |
| 7 | P1.7/UCA0STE/SMCLK/TDO/A7 | bidirectional | General-purpose I/O with port interrupt and wake from LPMx.5; also eUSCI_A0 STE, SMCLK output, JTAG TDO, and ADC input A7. |
| 8 | P4.3/UCB1SOMI/UCB1SCL/TB0.5/A8 | bidirectional | General-purpose I/O with port interrupt and wake from LPMx.5; also eUSCI_B1 SOMI or SCL, Timer TB0.5, and ADC input A8. |
| 9 | P4.4/UCB1SIMO/UCB1SDA/TB0.6/A9 | bidirectional | General-purpose I/O with port interrupt and wake from LPMx.5; also eUSCI_B1 SIMO or SDA, Timer TB0.6, and ADC input A9. |
| 10 | P1.0/UCB0STE/TA0CLK/A0/Veref+ | bidirectional | General-purpose I/O with port interrupt and wake from LPMx.5; also eUSCI_B0 STE, Timer TA0CLK, ADC input A0, and ADC positive reference Veref+. |
| 11 | P1.1/UCB0CLK/TA0.1/COMP0.0/A1 | bidirectional | General-purpose I/O with port interrupt and wake from LPMx.5; also eUSCI_B0 clock, Timer TA0.1, eCOMP0 input channel C0, and ADC input A1. |
| 12 | P1.2/UCB0SIMO/UCB0SDA/TA0.2/A2/Veref- | bidirectional | General-purpose I/O with port interrupt and wake from LPMx.5; also eUSCI_B0 SIMO or SDA, Timer TA0.2, ADC input A2, and ADC negative reference Veref-. |
| 13 | P1.3/UCB0SOMI/UCB0SCL/MCLK/A3 | bidirectional | General-purpose I/O with port interrupt and wake from LPMx.5; also eUSCI_B0 SOMI or SCL, MCLK output, and ADC input A3. |
| 14 | P2.2/ACLK/COMP0.1 | bidirectional | General-purpose I/O; also ACLK output and eCOMP0 input channel C1. |
| 15 | P4.5/UCB0SOMI/UCB0SCL/TA3.2 | bidirectional | General-purpose I/O (remapped eUSCI_B0 SOMI/SCL and Timer TA3.2 function, selected by TAxRMP/USCIBxRMP). |
| 16 | P4.6/UCB0SIMO/UCB0SDA/TA3.1 | bidirectional | General-purpose I/O (remapped eUSCI_B0 SIMO/SDA and Timer TA3.1 function, selected by TAxRMP/USCIBxRMP). |
| 17 | P3.0/TA2.2 | bidirectional | General-purpose I/O with Timer TA2.2 capture/compare output function. |
| 18 | P3.3/TA2.1 | bidirectional | General-purpose I/O with Timer TA2.1 capture/compare output function. |
| 19 | P2.3/TA2.0 | bidirectional | General-purpose I/O with Timer TA2.0 capture/compare output function. |
| 20 | P3.4/TA2CLK/COMP0OUT | bidirectional | General-purpose I/O; also Timer TA2CLK input and eCOMP0 output COMP0OUT. |
| 21 | P3.1/UCA1STE | bidirectional | General-purpose I/O with eUSCI_A1 STE function. |
| 22 | P2.4/UCA1CLK | bidirectional | General-purpose I/O with eUSCI_A1 clock function. |
| 23 | P2.5/UCA1RXD/UCA1SOMI | bidirectional | General-purpose I/O with eUSCI_A1 receive or SOMI function. |
| 24 | P2.6/UCA1TXD/UCA1SIMO | bidirectional | General-purpose I/O with eUSCI_A1 transmit or SIMO function. |
| 25 | DNC | unconnected | Do not connect; leave this pin unconnected. |
| 26 | P3.7/TA3.2 | bidirectional | General-purpose I/O with Timer TA3.2 capture/compare output function. |
| 27 | P4.0/TA3.1 | bidirectional | General-purpose I/O with Timer TA3.1 capture/compare output function. |
| 28 | P4.1/TA3.0 | bidirectional | General-purpose I/O with Timer TA3.0 capture/compare output function. |
| 29 | P4.2/TA3CLK | bidirectional | General-purpose I/O with Timer TA3CLK input function. |
| 30 | P2.7/UCB1STE | bidirectional | General-purpose I/O with eUSCI_B1 STE function. |
| 31 | P3.5/UCB1CLK/TB0TRG | bidirectional | General-purpose I/O; also eUSCI_B1 clock and Timer TB0 external trigger input TB0TRG. |
| 32 | P3.2/UCB1SIMO/UCB1SDA | bidirectional | General-purpose I/O with eUSCI_B1 SIMO or SDA function. |
| 33 | P3.6/UCB1SOMI/UCB1SCL | bidirectional | General-purpose I/O with eUSCI_B1 SOMI or SCL function. |
| 34 | P4.7/UCA0STE/TB0.1 | bidirectional | General-purpose I/O with eUSCI_A0 STE and Timer TB0.1 function. |
| 35 | P5.0/UCA0CLK/TB0.2 | bidirectional | General-purpose I/O with eUSCI_A0 clock and Timer TB0.2 function. |
| 36 | P5.1/UCA0RXD/UCA0SOMI/TB0.3 | bidirectional | General-purpose I/O with eUSCI_A0 receive or SOMI and Timer TB0.3 function. |
| 37 | P5.2/UCA0TXD/UCA0SIMO/TB0.4 | bidirectional | General-purpose I/O with eUSCI_A0 transmit or SIMO and Timer TB0.4 function. |
| 38 | P2.0/XOUT | bidirectional | General-purpose I/O; also crystal oscillator output XOUT for the 32-kHz LFXT. |
| 39 | P2.1/XIN | bidirectional | General-purpose I/O; also crystal oscillator input XIN for the 32-kHz LFXT or digital clock input in XT1BYPASS mode. |
| 40 | DVSS | power_in | Ground supply pin; connect to the board ground (VSS) with single-point separated grounds. |
| 41 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | VQFN-40-EP(6x6) |
| Category | Embedded Processors & Controllers |
| Pins | 41 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage applied at DVCC pin | VCC | 1.8 | 3.6 | V | 20 | ||
| Operating free-air temperature | TA | -40 | 105 | °C | 20 | ||
| Operating junction temperature | TJ | -40 | 115 | °C | 20 | ||
| Recommended capacitor at DVCC | CDVCC | 4.7 | 10 | µF | 20 | ||
| Processor frequency (MCLK frequency), no FRAM wait states | fSYSTEM | 0 | 8 | MHz | NWAITSx = 0 | 20 | |
| Processor frequency (MCLK frequency), with FRAM wait states | fSYSTEM | 0 | 16 | MHz | NWAITSx = 1 | 20 | |
| SMCLK frequency | fSMCLK | 16 | MHz | 20 | |||
| ACLK frequency | fACLK | 40 | kHz | 20 | |||
| Voltage applied at DVCC pin to VSS | -0.3 | 4.1 | V | 20 | |||
| Voltage applied to any other pin, referenced to VSS | -0.3 | 4.1 | V | Printed as VCC + 0.3 (4.1 V Max) | 20 | ||
| Diode current at any device pin | -2 | 2 | mA | 20 | |||
| Junction temperature | TJ | 115 | °C | 20 | |||
| Storage temperature | Tstg | -40 | 125 | °C | 20 | ||
| SVSH power-down level | VSVSH- | 1.71 | 1.8 | 1.87 | V | 25 | |
| SVSH power-up level | VSVSH+ | 1.76 | 1.88 | 1.99 | V | 25 | |
| Positive built-in reference output at VREF+ pin | VREF+, 1.2V | 1.16 | 1.2 | 1.24 | V | EXTREFEN = 1 with 1-mA load current | 33 |
| FLL lock frequency, 16 MHz, 25°C | fDCO, FLL | -1 | 1 | % | 3 V, measured at MCLK, internal trimmed REFO as reference | 28 | |
| FLL lock frequency, 16 MHz, -40°C to 105°C | fDCO, FLL | -3 | 3 | % | 3 V, -40°C to 105°C | 28 | |
| FLL lock frequency, 16 MHz, -40°C to 105°C, XT1 reference | fDCO, FLL | -0.5 | 0.5 | % | 3 V, -40°C to 105°C, measured at MCLK, XT1 crystal as reference | 28 | |
| Duty cycle | fDUTY | 40 | 50 | 60 | % | 3 V, measured at MCLK, XT1 crystal as reference | 28 |
| REFO absolute calibrated tolerance | -3.5 | 3.5 | % | -40°C to 105°C, 1.8 V to 3.6 V | 30 | ||
| REFO duty cycle | fDC | 40 | 50 | 60 | % | Measured at MCLK, 1.8 V to 3.6 V | 30 |
| MODOSC frequency | fMODOSC | 3 | 3.8 | 4.6 | MHz | 3 V | 30 |
| MODOSC duty cycle | fMODOSC,DC | 40 | 50 | 60 | % | 3 V | 30 |
| LF XT1 oscillator LF duty cycle | DCXT1, LF | 30 | 70 | % | Measured at MCLK, fLFXT = 32768 Hz | 27 | |
| Oscillator fault frequency | fFault,LFXT | 0 | 3500 | Hz | XTS = 0 | 27 | |
| Positive-going input threshold voltage | VIT+ | 0.9 | 1.5 | V | 2 V | 31 | |
| Positive-going input threshold voltage | VIT+ | 1.35 | 2.25 | V | 3 V | 31 | |
| Negative-going input threshold voltage | VIT- | 0.5 | 1.1 | V | 2 V | 31 | |
| Negative-going input threshold voltage | VIT- | 0.75 | 1.65 | V | 3 V | 31 | |
| Input voltage hysteresis (VIT+ - VIT-) | Vhys | 0.3 | 0.8 | V | 2 V | 31 | |
| Input voltage hysteresis (VIT+ - VIT-) | Vhys | 0.4 | 1.2 | V | 3 V | 31 | |
| Pullup or pulldown resistor | RPull | 20 | 35 | 50 | kΩ | For pullup: VIN = VSS; for pulldown: VIN = VCC | 31 |
| High-level output voltage | VOH | 1.4 | 2 | V | I(OHmax) = -3 mA, 2 V | 31 | |
| High-level output voltage | VOH | 2.4 | 3 | V | I(OHmax) = -5 mA, 3 V | 31 | |
| Low-level output voltage | VOL | 0 | 0.6 | V | I(OLmax) = 3 mA, 2 V | 31 | |
| High-impedance leakage current of GPIO pins | Ilkg(Px.y) | -20 | 20 | nA | 2 V, 3 V | 31 | |
| Integral linearity error (12-bit mode) | EI | -2.5 | 2.5 | LSB | Veref+ reference 2.4 V to 3.6 V | 41 | |
| Differential linearity error (12-bit mode) | ED | -1 | 1.5 | LSB | Veref+ reference 2.4 V to 3.6 V | 41 | |
| Offset error (12-bit mode) | EO | -4 | 4 | mV | Veref+ reference, 2.4 V to 3.6 V | 41 | |
| Gain error (12-bit mode) | EG | -9 | 9 | LSB | Veref+ as reference, 2.4 V to 3.6 V | 41 | |
| Total unadjusted error (12-bit mode) | ET | -5 | 5 | LSB | Veref+ as reference, 2.4 V to 3.6 V | 41 | |
| Supply voltage (eCOMP0) | VCC | 2 | 3.6 | V | 42 | ||
| Input offset voltage | VOFFSET | -30 | 30 | mV | CPEN = 1, CPMSEL = 0 | 42 | |
| Input offset voltage | VOFFSET | -40 | 40 | mV | CPEN = 1, CPMSEL = 1 | 42 | |
| Quiescent current draw from VCC, only comparator | ICOMP | 24 | 35 | µA | VIC = VCC/2, CPEN = 1, CPMSEL = 0 | 42 | |
| Quiescent current draw from VCC, only comparator | ICOMP | 1.6 | 5 | µA | VIC = VCC/2, CPEN = 1, CPMSEL = 1 | 42 | |
| Timer_A input clock frequency | fTA | 16 | MHz | Internal SMCLK, ACLK; external TACLK; duty cycle 50% ±10%; 2 V, 3 V | 34 | ||
| eUSCI input clock frequency (UART mode) | feUSCI | 16 | MHz | Internal SMCLK, MODCLK; external UCLK; duty cycle 50% ±10%; 2 V, 3 V | 35 | ||
| BITCLK clock frequency (equals baud rate in Mbaud) | fBITCLK | 5 | MHz | 2 V, 3 V | 35 | ||
| eUSCI input clock frequency (SPI master mode) | feUSCI | 8 | MHz | Internal SMCLK, MODCLK; duty cycle 50% ±10% | 35 | ||
| SOMI input data setup time | tSU,MI | 58 | ns | 2 V | 35 | ||
| SOMI input data setup time | tSU,MI | 40 | ns | 3 V | 35 | ||
| Data retention duration | tRetention | 100 | years | TJ = 25°C | 43 | ||
| Data retention duration | tRetention | 40 | years | TJ = 70°C | 43 | ||
| Data retention duration | tRetention | 10 | years | TJ = 95°C | 43 | ||
| Junction-to-ambient thermal resistance, still air, VQFN 40 pin (RHA) | RθJA | 31 | °C/W | JEDEC 2S2P system | 25 | ||
| Junction-to-case (top) thermal resistance, VQFN 40 pin (RHA) | RθJC | 22.3 | °C/W | JEDEC 1S0P system | 25 | ||
| Junction-to-board thermal resistance, VQFN 40 pin (RHA) | RθJB | 12.3 | °C/W | 25 |
CAD (KiCad official)
- Symbol:
MSP430FR2476TRHAT - Footprint:
Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm - 3D model: VQFN-40-EP(6x6) (KiCad packages3D, STEP)
- 3D model files:
msp430fr2476trhat-etched.step/msp430fr2476trhat-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);msp430fr2476trhat.step/msp430fr2476trhat.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (111 pp, sha256
8beeba32abeec2bd, retrieved 2026-11-05, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).