main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers msp430fr2476trhat: viewers · Ray
msp430fr2476trhat-etched.glb Publish 0.1.0 · Ray
msp430fr2476trhat-etched.step msp430fr2476trhat: factory component page (tier=mfr) · Ray
msp430fr2476trhat-hero.glb msp430fr2476trhat: hero GLB from the etched model (keeps the MPN mark) · Ray
msp430fr2476trhat-hero.overlay.json Publish 0.1.0 · Ray
msp430fr2476trhat.glb Publish 0.1.0 · Ray
msp430fr2476trhat.kicad_mod Publish 0.1.0 · Ray
msp430fr2476trhat.kicad_sym Publish 0.1.0 · Ray
msp430fr2476trhat.lbr Publish 0.1.0 · Ray
msp430fr2476trhat.step Publish 0.1.0 · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier mfr, 41 pins · Ray

MSP430FR2476TRHAT

Texas Instruments · Microcontrollers (MCU/MPU/SOC) · VQFN-40-EP(6x6)

MSP430FR2476TRHAT from Texas Instruments, in a VQFN-40-EP(6x6). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 DVCC power_in Primary supply pin for the digital I/O; recommended supply voltage is 1.8 V to 3.6 V with a 10-µF capacitor at DVCC.
2 RST/NMI/SBWTDIO bidirectional Reset input (pullup enabled by default), NMI input, and Spy-Bi-Wire data input/output; unused pins should use a 47-kΩ pullup to DVCC with a 10-nF pulldown.
3 TEST/SBWTCK input Test mode pin and Spy-Bi-Wire input clock; the pin always has an internal pulldown enabled and is left open when unused.
4 P1.4/UCA0TXD/UCA0SIMO/TA1.2/TCK/A4/VREF+ bidirectional General-purpose I/O with port interrupt and wake from LPMx.5; also eUSCI_A0 transmit or SIMO, Timer TA1.2, JTAG TCK, ADC input A4, and VREF+ output.
5 P1.5/UCA0RXD/UCA0SOMI/TA1.1/TMS/A5 bidirectional General-purpose I/O with port interrupt and wake from LPMx.5; also eUSCI_A0 receive or SOMI, Timer TA1.1, JTAG TMS, and ADC input A5.
6 P1.6/UCA0CLK/TA1CLK/TDI/TCLK/A6 bidirectional General-purpose I/O with port interrupt and wake from LPMx.5; also eUSCI_A0 clock, Timer TA1CLK, JTAG TDI/TCLK, and ADC input A6.
7 P1.7/UCA0STE/SMCLK/TDO/A7 bidirectional General-purpose I/O with port interrupt and wake from LPMx.5; also eUSCI_A0 STE, SMCLK output, JTAG TDO, and ADC input A7.
8 P4.3/UCB1SOMI/UCB1SCL/TB0.5/A8 bidirectional General-purpose I/O with port interrupt and wake from LPMx.5; also eUSCI_B1 SOMI or SCL, Timer TB0.5, and ADC input A8.
9 P4.4/UCB1SIMO/UCB1SDA/TB0.6/A9 bidirectional General-purpose I/O with port interrupt and wake from LPMx.5; also eUSCI_B1 SIMO or SDA, Timer TB0.6, and ADC input A9.
10 P1.0/UCB0STE/TA0CLK/A0/Veref+ bidirectional General-purpose I/O with port interrupt and wake from LPMx.5; also eUSCI_B0 STE, Timer TA0CLK, ADC input A0, and ADC positive reference Veref+.
11 P1.1/UCB0CLK/TA0.1/COMP0.0/A1 bidirectional General-purpose I/O with port interrupt and wake from LPMx.5; also eUSCI_B0 clock, Timer TA0.1, eCOMP0 input channel C0, and ADC input A1.
12 P1.2/UCB0SIMO/UCB0SDA/TA0.2/A2/Veref- bidirectional General-purpose I/O with port interrupt and wake from LPMx.5; also eUSCI_B0 SIMO or SDA, Timer TA0.2, ADC input A2, and ADC negative reference Veref-.
13 P1.3/UCB0SOMI/UCB0SCL/MCLK/A3 bidirectional General-purpose I/O with port interrupt and wake from LPMx.5; also eUSCI_B0 SOMI or SCL, MCLK output, and ADC input A3.
14 P2.2/ACLK/COMP0.1 bidirectional General-purpose I/O; also ACLK output and eCOMP0 input channel C1.
15 P4.5/UCB0SOMI/UCB0SCL/TA3.2 bidirectional General-purpose I/O (remapped eUSCI_B0 SOMI/SCL and Timer TA3.2 function, selected by TAxRMP/USCIBxRMP).
16 P4.6/UCB0SIMO/UCB0SDA/TA3.1 bidirectional General-purpose I/O (remapped eUSCI_B0 SIMO/SDA and Timer TA3.1 function, selected by TAxRMP/USCIBxRMP).
17 P3.0/TA2.2 bidirectional General-purpose I/O with Timer TA2.2 capture/compare output function.
18 P3.3/TA2.1 bidirectional General-purpose I/O with Timer TA2.1 capture/compare output function.
19 P2.3/TA2.0 bidirectional General-purpose I/O with Timer TA2.0 capture/compare output function.
20 P3.4/TA2CLK/COMP0OUT bidirectional General-purpose I/O; also Timer TA2CLK input and eCOMP0 output COMP0OUT.
21 P3.1/UCA1STE bidirectional General-purpose I/O with eUSCI_A1 STE function.
22 P2.4/UCA1CLK bidirectional General-purpose I/O with eUSCI_A1 clock function.
23 P2.5/UCA1RXD/UCA1SOMI bidirectional General-purpose I/O with eUSCI_A1 receive or SOMI function.
24 P2.6/UCA1TXD/UCA1SIMO bidirectional General-purpose I/O with eUSCI_A1 transmit or SIMO function.
25 DNC unconnected Do not connect; leave this pin unconnected.
26 P3.7/TA3.2 bidirectional General-purpose I/O with Timer TA3.2 capture/compare output function.
27 P4.0/TA3.1 bidirectional General-purpose I/O with Timer TA3.1 capture/compare output function.
28 P4.1/TA3.0 bidirectional General-purpose I/O with Timer TA3.0 capture/compare output function.
29 P4.2/TA3CLK bidirectional General-purpose I/O with Timer TA3CLK input function.
30 P2.7/UCB1STE bidirectional General-purpose I/O with eUSCI_B1 STE function.
31 P3.5/UCB1CLK/TB0TRG bidirectional General-purpose I/O; also eUSCI_B1 clock and Timer TB0 external trigger input TB0TRG.
32 P3.2/UCB1SIMO/UCB1SDA bidirectional General-purpose I/O with eUSCI_B1 SIMO or SDA function.
33 P3.6/UCB1SOMI/UCB1SCL bidirectional General-purpose I/O with eUSCI_B1 SOMI or SCL function.
34 P4.7/UCA0STE/TB0.1 bidirectional General-purpose I/O with eUSCI_A0 STE and Timer TB0.1 function.
35 P5.0/UCA0CLK/TB0.2 bidirectional General-purpose I/O with eUSCI_A0 clock and Timer TB0.2 function.
36 P5.1/UCA0RXD/UCA0SOMI/TB0.3 bidirectional General-purpose I/O with eUSCI_A0 receive or SOMI and Timer TB0.3 function.
37 P5.2/UCA0TXD/UCA0SIMO/TB0.4 bidirectional General-purpose I/O with eUSCI_A0 transmit or SIMO and Timer TB0.4 function.
38 P2.0/XOUT bidirectional General-purpose I/O; also crystal oscillator output XOUT for the 32-kHz LFXT.
39 P2.1/XIN bidirectional General-purpose I/O; also crystal oscillator input XIN for the 32-kHz LFXT or digital clock input in XT1BYPASS mode.
40 DVSS power_in Ground supply pin; connect to the board ground (VSS) with single-point separated grounds.
41 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package VQFN-40-EP(6x6)
Category Embedded Processors & Controllers
Pins 41

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage applied at DVCC pin VCC 1.8 3.6 V 20
Operating free-air temperature TA -40 105 °C 20
Operating junction temperature TJ -40 115 °C 20
Recommended capacitor at DVCC CDVCC 4.7 10 µF 20
Processor frequency (MCLK frequency), no FRAM wait states fSYSTEM 0 8 MHz NWAITSx = 0 20
Processor frequency (MCLK frequency), with FRAM wait states fSYSTEM 0 16 MHz NWAITSx = 1 20
SMCLK frequency fSMCLK 16 MHz 20
ACLK frequency fACLK 40 kHz 20
Voltage applied at DVCC pin to VSS -0.3 4.1 V 20
Voltage applied to any other pin, referenced to VSS -0.3 4.1 V Printed as VCC + 0.3 (4.1 V Max) 20
Diode current at any device pin -2 2 mA 20
Junction temperature TJ 115 °C 20
Storage temperature Tstg -40 125 °C 20
SVSH power-down level VSVSH- 1.71 1.8 1.87 V 25
SVSH power-up level VSVSH+ 1.76 1.88 1.99 V 25
Positive built-in reference output at VREF+ pin VREF+, 1.2V 1.16 1.2 1.24 V EXTREFEN = 1 with 1-mA load current 33
FLL lock frequency, 16 MHz, 25°C fDCO, FLL -1 1 % 3 V, measured at MCLK, internal trimmed REFO as reference 28
FLL lock frequency, 16 MHz, -40°C to 105°C fDCO, FLL -3 3 % 3 V, -40°C to 105°C 28
FLL lock frequency, 16 MHz, -40°C to 105°C, XT1 reference fDCO, FLL -0.5 0.5 % 3 V, -40°C to 105°C, measured at MCLK, XT1 crystal as reference 28
Duty cycle fDUTY 40 50 60 % 3 V, measured at MCLK, XT1 crystal as reference 28
REFO absolute calibrated tolerance -3.5 3.5 % -40°C to 105°C, 1.8 V to 3.6 V 30
REFO duty cycle fDC 40 50 60 % Measured at MCLK, 1.8 V to 3.6 V 30
MODOSC frequency fMODOSC 3 3.8 4.6 MHz 3 V 30
MODOSC duty cycle fMODOSC,DC 40 50 60 % 3 V 30
LF XT1 oscillator LF duty cycle DCXT1, LF 30 70 % Measured at MCLK, fLFXT = 32768 Hz 27
Oscillator fault frequency fFault,LFXT 0 3500 Hz XTS = 0 27
Positive-going input threshold voltage VIT+ 0.9 1.5 V 2 V 31
Positive-going input threshold voltage VIT+ 1.35 2.25 V 3 V 31
Negative-going input threshold voltage VIT- 0.5 1.1 V 2 V 31
Negative-going input threshold voltage VIT- 0.75 1.65 V 3 V 31
Input voltage hysteresis (VIT+ - VIT-) Vhys 0.3 0.8 V 2 V 31
Input voltage hysteresis (VIT+ - VIT-) Vhys 0.4 1.2 V 3 V 31
Pullup or pulldown resistor RPull 20 35 50 kΩ For pullup: VIN = VSS; for pulldown: VIN = VCC 31
High-level output voltage VOH 1.4 2 V I(OHmax) = -3 mA, 2 V 31
High-level output voltage VOH 2.4 3 V I(OHmax) = -5 mA, 3 V 31
Low-level output voltage VOL 0 0.6 V I(OLmax) = 3 mA, 2 V 31
High-impedance leakage current of GPIO pins Ilkg(Px.y) -20 20 nA 2 V, 3 V 31
Integral linearity error (12-bit mode) EI -2.5 2.5 LSB Veref+ reference 2.4 V to 3.6 V 41
Differential linearity error (12-bit mode) ED -1 1.5 LSB Veref+ reference 2.4 V to 3.6 V 41
Offset error (12-bit mode) EO -4 4 mV Veref+ reference, 2.4 V to 3.6 V 41
Gain error (12-bit mode) EG -9 9 LSB Veref+ as reference, 2.4 V to 3.6 V 41
Total unadjusted error (12-bit mode) ET -5 5 LSB Veref+ as reference, 2.4 V to 3.6 V 41
Supply voltage (eCOMP0) VCC 2 3.6 V 42
Input offset voltage VOFFSET -30 30 mV CPEN = 1, CPMSEL = 0 42
Input offset voltage VOFFSET -40 40 mV CPEN = 1, CPMSEL = 1 42
Quiescent current draw from VCC, only comparator ICOMP 24 35 µA VIC = VCC/2, CPEN = 1, CPMSEL = 0 42
Quiescent current draw from VCC, only comparator ICOMP 1.6 5 µA VIC = VCC/2, CPEN = 1, CPMSEL = 1 42
Timer_A input clock frequency fTA 16 MHz Internal SMCLK, ACLK; external TACLK; duty cycle 50% ±10%; 2 V, 3 V 34
eUSCI input clock frequency (UART mode) feUSCI 16 MHz Internal SMCLK, MODCLK; external UCLK; duty cycle 50% ±10%; 2 V, 3 V 35
BITCLK clock frequency (equals baud rate in Mbaud) fBITCLK 5 MHz 2 V, 3 V 35
eUSCI input clock frequency (SPI master mode) feUSCI 8 MHz Internal SMCLK, MODCLK; duty cycle 50% ±10% 35
SOMI input data setup time tSU,MI 58 ns 2 V 35
SOMI input data setup time tSU,MI 40 ns 3 V 35
Data retention duration tRetention 100 years TJ = 25°C 43
Data retention duration tRetention 40 years TJ = 70°C 43
Data retention duration tRetention 10 years TJ = 95°C 43
Junction-to-ambient thermal resistance, still air, VQFN 40 pin (RHA) RθJA 31 °C/W JEDEC 2S2P system 25
Junction-to-case (top) thermal resistance, VQFN 40 pin (RHA) RθJC 22.3 °C/W JEDEC 1S0P system 25
Junction-to-board thermal resistance, VQFN 40 pin (RHA) RθJB 12.3 °C/W 25

CAD (KiCad official)

  • Symbol: MSP430FR2476TRHAT
  • Footprint: Package_DFN_QFN:QFN-40-1EP_6x6mm_P0.5mm_EP4.6x4.6mm
  • 3D model: VQFN-40-EP(6x6) (KiCad packages3D, STEP)
  • 3D model files: msp430fr2476trhat-etched.step / msp430fr2476trhat-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); msp430fr2476trhat.step / msp430fr2476trhat.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (111 pp, sha256 8beeba32abeec2bd, retrieved 2026-11-05, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF