Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

SN74ACT244MDWREP

Texas Instruments · Buffer/Driver/Transceiver · SOIC-20-300mil

SN74ACT244MDWREP from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 1OE input Active-low output enable for buffer 1 (outputs 1Y1-1Y4); when high the outputs go to high impedance, and OE should be tied to VCC through a pullup resistor to keep the outputs high-Z during power up and power down.
2 1A1 input Data input to buffer 1 (channel 1A1 to 1Y1); inputs accept voltages up to 5.5 V and are TTL compatible, and unused inputs must be held at VCC or GND.
3 2Y4 output 3-state output of buffer 2 (channel 2A4), high impedance when 2OE is high; continuous output current is limited to ±50 mA.
4 1A2 input Data input to buffer 1 (channel 1A2 to 1Y2); inputs accept voltages up to 5.5 V and are TTL compatible, and unused inputs must be held at VCC or GND.
5 2Y3 output 3-state output of buffer 2 (channel 2A3), high impedance when 2OE is high; continuous output current is limited to ±50 mA.
6 1A3 input Data input to buffer 1 (channel 1A3 to 1Y3); inputs accept voltages up to 5.5 V and are TTL compatible, and unused inputs must be held at VCC or GND.
7 2Y2 output 3-state output of buffer 2 (channel 2A2), high impedance when 2OE is high; continuous output current is limited to ±50 mA.
8 1A4 input Data input to buffer 1 (channel 1A4 to 1Y4); inputs accept voltages up to 5.5 V and are TTL compatible, and unused inputs must be held at VCC or GND.
9 2Y1 output 3-state output of buffer 2 (channel 2A1), high impedance when 2OE is high; continuous output current is limited to ±50 mA.
10 GND power_in Ground reference for the device; unused inputs must be held at VCC or GND.
11 2A1 input Data input to buffer 2 (channel 2A1 to 2Y1); inputs accept voltages up to 5.5 V and are TTL compatible, and unused inputs must be held at VCC or GND.
12 1Y4 output 3-state output of buffer 1 (channel 1A4), high impedance when 1OE is high; continuous output current is limited to ±50 mA.
13 2A2 input Data input to buffer 2 (channel 2A2 to 2Y2); inputs accept voltages up to 5.5 V and are TTL compatible, and unused inputs must be held at VCC or GND.
14 1Y3 output 3-state output of buffer 1 (channel 1A3), high impedance when 1OE is high; continuous output current is limited to ±50 mA.
15 2A3 input Data input to buffer 2 (channel 2A3 to 2Y3); inputs accept voltages up to 5.5 V and are TTL compatible, and unused inputs must be held at VCC or GND.
16 1Y2 output 3-state output of buffer 1 (channel 1A2), high impedance when 1OE is high; continuous output current is limited to ±50 mA.
17 2A4 input Data input to buffer 2 (channel 2A4 to 2Y4); inputs accept voltages up to 5.5 V and are TTL compatible, and unused inputs must be held at VCC or GND.
18 1Y1 output 3-state output of buffer 1 (channel 1A1), high impedance when 1OE is high; continuous output current is limited to ±50 mA.
19 2OE input Active-low output enable for buffer 2 (outputs 2Y1-2Y4); when high the outputs go to high impedance, and it should be tied to VCC through a pullup resistor to keep the outputs high-Z during power up and power down.
20 VCC power_in Supply voltage, 4.5 V to 5.5 V recommended operating range.

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SOIC-20-300mil
Category Logic ICs
Pins 20

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
High-level output voltage VOH 4.4 4.49 V IOH = -50 µA, VCC = 4.5 V 3
High-level output voltage VOH 5.4 5.49 V IOH = -50 µA, VCC = 5.5 V 3
High-level output voltage VOH 3.7 3.86 V IOH = -24 mA, VCC = 4.5 V 3
High-level output voltage VOH 4.7 4.86 V IOH = -24 mA, VCC = 5.5 V 3
Low-level output voltage VOL 0.001 0.1 V IOL = 50 µA, VCC = 4.5 V 3
Low-level output voltage VOL 0.5 V IOL = 24 mA, VCC = 4.5 V 3
Off-state output current IOZ -5 5 µA VO = VCC or GND, VCC = 5.5 V 3
Input current II -1 1 µA VI = VCC or GND, VCC = 5.5 V 3
Supply current ICC 80 µA VI = VCC or GND, IO = 0, VCC = 5.5 V 3
Supply current change ΔICC 1.6 mA One input at 3.4 V, other inputs at GND or VCC, VCC = 5.5 V 3
Input capacitance Ci 2.5 pF VI = VCC or GND, VCC = 5 V 3
Output capacitance Co 8 pF VI = VCC or GND, VCC = 5 V 3
Propagation delay A to Y (low-to-high) tPLH 1 6.5 10 ns VCC = 5 V ± 0.5 V, A to Y 3
Propagation delay A to Y (high-to-low) tPHL 1 7 10 ns VCC = 5 V ± 0.5 V, A to Y 3
Output enable time OE to Y (to high) tPZH 1 7 9.5 ns VCC = 5 V ± 0.5 V, OE to Y 3
Output enable time OE to Y (to low) tPZL 1 7 11 ns VCC = 5 V ± 0.5 V, OE to Y 3
Output disable time OE to Y (from high) tPHZ 1 8 11 ns VCC = 5 V ± 0.5 V, OE to Y 3
Output disable time OE to Y (from low) tPLZ 1 7.5 11.5 ns VCC = 5 V ± 0.5 V, OE to Y 3
Power dissipation capacitance Cpd 45 pF CL = 50 pF, f = 1 MHz, VCC = 5 V, TA = 25°C 3
Supply voltage VCC 4.5 5.5 V 2
High-level input voltage VIH 2 V 2
Low-level input voltage VIL 0.8 V 2
Input voltage VI 0 V max is VCC 2
Output voltage VO 0 V max is VCC 2
High-level output current IOH -24 mA 2
Low-level output current IOL 24 mA 2
Input transition rise or fall rate Δt/Δv 8 ns/V 2
Operating free-air temperature TA -55 125 °C SN74ACT244M-EP 2
Supply voltage range VCC -0.5 7 V 2
Input voltage range VI -0.5 V max is VCC + 0.5 V 2
Output voltage range VO -0.5 V max is VCC + 0.5 V 2
Input clamp current IIK -20 20 mA VI < 0 or VI > VCC 2
Output clamp current IOK -20 20 mA VO < 0 or VO > VCC 2
Continuous output current IO -50 50 mA VO = 0 to VCC 2
Continuous current through VCC or GND -200 200 mA 2
Storage temperature range Tstg -65 150 °C 2
Package thermal impedance θJA 58 °C/W DW package 2

CAD (KiCad official)

  • Symbol: SN74ACT244MDWREP
  • Footprint: Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm
  • 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
  • 3D model files: sn74act244mdwrep-etched.step / sn74act244mdwrep-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sn74act244mdwrep.step / sn74act244mdwrep.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (13 pp, sha256 48019f5dc50a3825, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF