Generated by kicad-footprint-generator · KiCad file format 20260206
SN74ACT244MDWREP
Texas Instruments · Buffer/Driver/Transceiver · SOIC-20-300mil
SN74ACT244MDWREP from Texas Instruments, in a SOIC-20-300mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | 1OE | input | Active-low output enable for buffer 1 (outputs 1Y1-1Y4); when high the outputs go to high impedance, and OE should be tied to VCC through a pullup resistor to keep the outputs high-Z during power up and power down. |
| 2 | 1A1 | input | Data input to buffer 1 (channel 1A1 to 1Y1); inputs accept voltages up to 5.5 V and are TTL compatible, and unused inputs must be held at VCC or GND. |
| 3 | 2Y4 | output | 3-state output of buffer 2 (channel 2A4), high impedance when 2OE is high; continuous output current is limited to ±50 mA. |
| 4 | 1A2 | input | Data input to buffer 1 (channel 1A2 to 1Y2); inputs accept voltages up to 5.5 V and are TTL compatible, and unused inputs must be held at VCC or GND. |
| 5 | 2Y3 | output | 3-state output of buffer 2 (channel 2A3), high impedance when 2OE is high; continuous output current is limited to ±50 mA. |
| 6 | 1A3 | input | Data input to buffer 1 (channel 1A3 to 1Y3); inputs accept voltages up to 5.5 V and are TTL compatible, and unused inputs must be held at VCC or GND. |
| 7 | 2Y2 | output | 3-state output of buffer 2 (channel 2A2), high impedance when 2OE is high; continuous output current is limited to ±50 mA. |
| 8 | 1A4 | input | Data input to buffer 1 (channel 1A4 to 1Y4); inputs accept voltages up to 5.5 V and are TTL compatible, and unused inputs must be held at VCC or GND. |
| 9 | 2Y1 | output | 3-state output of buffer 2 (channel 2A1), high impedance when 2OE is high; continuous output current is limited to ±50 mA. |
| 10 | GND | power_in | Ground reference for the device; unused inputs must be held at VCC or GND. |
| 11 | 2A1 | input | Data input to buffer 2 (channel 2A1 to 2Y1); inputs accept voltages up to 5.5 V and are TTL compatible, and unused inputs must be held at VCC or GND. |
| 12 | 1Y4 | output | 3-state output of buffer 1 (channel 1A4), high impedance when 1OE is high; continuous output current is limited to ±50 mA. |
| 13 | 2A2 | input | Data input to buffer 2 (channel 2A2 to 2Y2); inputs accept voltages up to 5.5 V and are TTL compatible, and unused inputs must be held at VCC or GND. |
| 14 | 1Y3 | output | 3-state output of buffer 1 (channel 1A3), high impedance when 1OE is high; continuous output current is limited to ±50 mA. |
| 15 | 2A3 | input | Data input to buffer 2 (channel 2A3 to 2Y3); inputs accept voltages up to 5.5 V and are TTL compatible, and unused inputs must be held at VCC or GND. |
| 16 | 1Y2 | output | 3-state output of buffer 1 (channel 1A2), high impedance when 1OE is high; continuous output current is limited to ±50 mA. |
| 17 | 2A4 | input | Data input to buffer 2 (channel 2A4 to 2Y4); inputs accept voltages up to 5.5 V and are TTL compatible, and unused inputs must be held at VCC or GND. |
| 18 | 1Y1 | output | 3-state output of buffer 1 (channel 1A1), high impedance when 1OE is high; continuous output current is limited to ±50 mA. |
| 19 | 2OE | input | Active-low output enable for buffer 2 (outputs 2Y1-2Y4); when high the outputs go to high impedance, and it should be tied to VCC through a pullup resistor to keep the outputs high-Z during power up and power down. |
| 20 | VCC | power_in | Supply voltage, 4.5 V to 5.5 V recommended operating range. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SOIC-20-300mil |
| Category | Logic ICs |
| Pins | 20 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| High-level output voltage | VOH | 4.4 | 4.49 | V | IOH = -50 µA, VCC = 4.5 V | 3 | |
| High-level output voltage | VOH | 5.4 | 5.49 | V | IOH = -50 µA, VCC = 5.5 V | 3 | |
| High-level output voltage | VOH | 3.7 | 3.86 | V | IOH = -24 mA, VCC = 4.5 V | 3 | |
| High-level output voltage | VOH | 4.7 | 4.86 | V | IOH = -24 mA, VCC = 5.5 V | 3 | |
| Low-level output voltage | VOL | 0.001 | 0.1 | V | IOL = 50 µA, VCC = 4.5 V | 3 | |
| Low-level output voltage | VOL | 0.5 | V | IOL = 24 mA, VCC = 4.5 V | 3 | ||
| Off-state output current | IOZ | -5 | 5 | µA | VO = VCC or GND, VCC = 5.5 V | 3 | |
| Input current | II | -1 | 1 | µA | VI = VCC or GND, VCC = 5.5 V | 3 | |
| Supply current | ICC | 80 | µA | VI = VCC or GND, IO = 0, VCC = 5.5 V | 3 | ||
| Supply current change | ΔICC | 1.6 | mA | One input at 3.4 V, other inputs at GND or VCC, VCC = 5.5 V | 3 | ||
| Input capacitance | Ci | 2.5 | pF | VI = VCC or GND, VCC = 5 V | 3 | ||
| Output capacitance | Co | 8 | pF | VI = VCC or GND, VCC = 5 V | 3 | ||
| Propagation delay A to Y (low-to-high) | tPLH | 1 | 6.5 | 10 | ns | VCC = 5 V ± 0.5 V, A to Y | 3 |
| Propagation delay A to Y (high-to-low) | tPHL | 1 | 7 | 10 | ns | VCC = 5 V ± 0.5 V, A to Y | 3 |
| Output enable time OE to Y (to high) | tPZH | 1 | 7 | 9.5 | ns | VCC = 5 V ± 0.5 V, OE to Y | 3 |
| Output enable time OE to Y (to low) | tPZL | 1 | 7 | 11 | ns | VCC = 5 V ± 0.5 V, OE to Y | 3 |
| Output disable time OE to Y (from high) | tPHZ | 1 | 8 | 11 | ns | VCC = 5 V ± 0.5 V, OE to Y | 3 |
| Output disable time OE to Y (from low) | tPLZ | 1 | 7.5 | 11.5 | ns | VCC = 5 V ± 0.5 V, OE to Y | 3 |
| Power dissipation capacitance | Cpd | 45 | pF | CL = 50 pF, f = 1 MHz, VCC = 5 V, TA = 25°C | 3 | ||
| Supply voltage | VCC | 4.5 | 5.5 | V | 2 | ||
| High-level input voltage | VIH | 2 | V | 2 | |||
| Low-level input voltage | VIL | 0.8 | V | 2 | |||
| Input voltage | VI | 0 | V | max is VCC | 2 | ||
| Output voltage | VO | 0 | V | max is VCC | 2 | ||
| High-level output current | IOH | -24 | mA | 2 | |||
| Low-level output current | IOL | 24 | mA | 2 | |||
| Input transition rise or fall rate | Δt/Δv | 8 | ns/V | 2 | |||
| Operating free-air temperature | TA | -55 | 125 | °C | SN74ACT244M-EP | 2 | |
| Supply voltage range | VCC | -0.5 | 7 | V | 2 | ||
| Input voltage range | VI | -0.5 | V | max is VCC + 0.5 V | 2 | ||
| Output voltage range | VO | -0.5 | V | max is VCC + 0.5 V | 2 | ||
| Input clamp current | IIK | -20 | 20 | mA | VI < 0 or VI > VCC | 2 | |
| Output clamp current | IOK | -20 | 20 | mA | VO < 0 or VO > VCC | 2 | |
| Continuous output current | IO | -50 | 50 | mA | VO = 0 to VCC | 2 | |
| Continuous current through VCC or GND | -200 | 200 | mA | 2 | |||
| Storage temperature range | Tstg | -65 | 150 | °C | 2 | ||
| Package thermal impedance | θJA | 58 | °C/W | DW package | 2 |
CAD (KiCad official)
- Symbol:
SN74ACT244MDWREP - Footprint:
Package_SO:SOIC-20W_7.5x12.8mm_P1.27mm - 3D model: SOIC-20-300mil (KiCad packages3D, STEP)
- 3D model files:
sn74act244mdwrep-etched.step/sn74act244mdwrep-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sn74act244mdwrep.step/sn74act244mdwrep.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (13 pp, sha256
48019f5dc50a3825, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).