3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownPIC16F570-I/SS
Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil
PIC16F570-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | MCLR/VPP | input | Active-low Master Clear (Reset) input with always-on weak pull-up and VPP high-voltage programming/test pin; voltage must not exceed VDD in normal operation or the device enters Programming mode. |
| 2 | RA0/AN0 | bidirectional | PORTA bit 0 bidirectional I/O (TTL input, CMOS output) shared with ADC channel 0 input AN0. |
| 3 | RA1/AN1/C1IN+ | bidirectional | PORTA bit 1 bidirectional I/O shared with ADC channel input AN1 and Comparator 1 non-inverting input C1IN+. |
| 4 | RA2/AN2/CVREF1 | bidirectional | PORTA bit 2 bidirectional I/O shared with ADC channel input AN2 and programmable voltage reference output CVREF1. |
| 5 | RA3/AN3/C2IN+ | bidirectional | PORTA bit 3 bidirectional I/O shared with ADC channel input AN3 and Comparator 2 non-inverting input C2IN+. |
| 6 | RA4/AN4/T0CKI | bidirectional | PORTA bit 4 bidirectional I/O shared with ADC channel input AN4 and Timer0 Schmitt Trigger clock input T0CKI. |
| 7 | RA5/AN5 | bidirectional | PORTA bit 5 bidirectional I/O shared with ADC channel input AN5. |
| 8 | VSS | power_in | Ground reference for logic and I/O pins. |
| 9 | RA7/CLKIN/OSC1 | bidirectional | PORTA bit 7 bidirectional I/O, also EXTRC Schmitt Trigger clock input CLKIN and crystal oscillator input OSC1. |
| 10 | RA6/CLKOUT/OSC2 | bidirectional | PORTA bit 6 bidirectional I/O, also CLKOUT (FOSC/4) in EXTRC/INTRC modes and crystal oscillator output OSC2 in XT, HS and LP modes. |
| 11 | RC0 | bidirectional | PORTC bit 0 bidirectional I/O with Schmitt Trigger input and CMOS output. |
| 12 | RC1/AN6/OP1 | bidirectional | PORTC bit 1 bidirectional I/O shared with ADC channel input AN6 and Op amp 1 output OP1. |
| 13 | RC2/OP1- | bidirectional | PORTC bit 2 bidirectional I/O shared with Op amp 1 inverting input OP1-. |
| 14 | RC3/OP1+ | bidirectional | PORTC bit 3 bidirectional I/O shared with Op amp 1 non-inverting input OP1+. |
| 15 | RC4/OP2+ | bidirectional | PORTC bit 4 bidirectional I/O shared with Op amp 2 non-inverting input OP2+. |
| 16 | RC5/OP2- | bidirectional | PORTC bit 5 bidirectional I/O shared with Op amp 2 inverting input OP2-. |
| 17 | RC6/AN7/OP2 | bidirectional | PORTC bit 6 bidirectional I/O shared with ADC channel input AN7 and Op amp 2 output OP2. |
| 18 | RC7/C2IN- | bidirectional | PORTC bit 7 bidirectional I/O shared with Comparator 2 inverting input C2IN-. |
| 19 | VSS | power_in | Ground reference for logic and I/O pins. |
| 20 | VDD | power_in | Positive supply for logic and I/O pins. |
| 21 | RB0 | bidirectional | PORTB bit 0 bidirectional I/O with software-programmable internal weak pull-up and wake-up from Sleep on pin change. |
| 22 | RB1 | bidirectional | PORTB bit 1 bidirectional I/O with software-programmable internal weak pull-up and wake-up from Sleep on pin change. |
| 23 | RB2 | bidirectional | PORTB bit 2 bidirectional I/O with software-programmable internal weak pull-up and wake-up from Sleep on pin change. |
| 24 | RB3/C1OUT | bidirectional | PORTB bit 3 bidirectional I/O with programmable weak pull-up and wake-up on pin change, also Comparator 1 output C1OUT. |
| 25 | RB4/C2OUT | bidirectional | PORTB bit 4 bidirectional I/O with programmable weak pull-up and wake-up on pin change, also Comparator 2 output C2OUT. |
| 26 | RB5 | bidirectional | PORTB bit 5 bidirectional I/O with software-programmable internal weak pull-up and wake-up from Sleep on pin change. |
| 27 | RB6/ICSPCLK | bidirectional | PORTB bit 6 bidirectional I/O with programmable weak pull-up and wake-up on pin change, also ICSP clock input ICSPCLK (Schmitt Trigger). |
| 28 | RB7/ICSPDAT | bidirectional | PORTB bit 7 bidirectional I/O with programmable weak pull-up and wake-up on pin change, also ICSP data pin ICSPDAT, with C1IN- and CVREF2 functions listed in the pinout table. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | SSOP-28-208mil |
| Category | Single Chip Microcomputer/Microcontroller |
| Pins | 28 |
CAD (KiCad official)
- Symbol:
PIC16F570-I - Footprint:
Package_SO:SSOP-28_5.3x10.2mm_P0.65mm - 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
- 3D model files:
pic16f570-i-etched.step/pic16f570-i-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pic16f570-i.step/pic16f570-i.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (129 pp, sha256
fa2404eac578d16b, retrieved 2026-10-30, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).
Other parts in this family
This page is PIC16F570-I/SS. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:
- PIC16F570-I/SP