Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PIC16F570-I/SS

Microchip Tech · Microcontroller Units (MCUs/MPUs/SOCs) · SSOP-28-208mil

PIC16F570-I from Microchip Tech, in a SSOP-28-208mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 MCLR/VPP input Active-low Master Clear (Reset) input with always-on weak pull-up and VPP high-voltage programming/test pin; voltage must not exceed VDD in normal operation or the device enters Programming mode.
2 RA0/AN0 bidirectional PORTA bit 0 bidirectional I/O (TTL input, CMOS output) shared with ADC channel 0 input AN0.
3 RA1/AN1/C1IN+ bidirectional PORTA bit 1 bidirectional I/O shared with ADC channel input AN1 and Comparator 1 non-inverting input C1IN+.
4 RA2/AN2/CVREF1 bidirectional PORTA bit 2 bidirectional I/O shared with ADC channel input AN2 and programmable voltage reference output CVREF1.
5 RA3/AN3/C2IN+ bidirectional PORTA bit 3 bidirectional I/O shared with ADC channel input AN3 and Comparator 2 non-inverting input C2IN+.
6 RA4/AN4/T0CKI bidirectional PORTA bit 4 bidirectional I/O shared with ADC channel input AN4 and Timer0 Schmitt Trigger clock input T0CKI.
7 RA5/AN5 bidirectional PORTA bit 5 bidirectional I/O shared with ADC channel input AN5.
8 VSS power_in Ground reference for logic and I/O pins.
9 RA7/CLKIN/OSC1 bidirectional PORTA bit 7 bidirectional I/O, also EXTRC Schmitt Trigger clock input CLKIN and crystal oscillator input OSC1.
10 RA6/CLKOUT/OSC2 bidirectional PORTA bit 6 bidirectional I/O, also CLKOUT (FOSC/4) in EXTRC/INTRC modes and crystal oscillator output OSC2 in XT, HS and LP modes.
11 RC0 bidirectional PORTC bit 0 bidirectional I/O with Schmitt Trigger input and CMOS output.
12 RC1/AN6/OP1 bidirectional PORTC bit 1 bidirectional I/O shared with ADC channel input AN6 and Op amp 1 output OP1.
13 RC2/OP1- bidirectional PORTC bit 2 bidirectional I/O shared with Op amp 1 inverting input OP1-.
14 RC3/OP1+ bidirectional PORTC bit 3 bidirectional I/O shared with Op amp 1 non-inverting input OP1+.
15 RC4/OP2+ bidirectional PORTC bit 4 bidirectional I/O shared with Op amp 2 non-inverting input OP2+.
16 RC5/OP2- bidirectional PORTC bit 5 bidirectional I/O shared with Op amp 2 inverting input OP2-.
17 RC6/AN7/OP2 bidirectional PORTC bit 6 bidirectional I/O shared with ADC channel input AN7 and Op amp 2 output OP2.
18 RC7/C2IN- bidirectional PORTC bit 7 bidirectional I/O shared with Comparator 2 inverting input C2IN-.
19 VSS power_in Ground reference for logic and I/O pins.
20 VDD power_in Positive supply for logic and I/O pins.
21 RB0 bidirectional PORTB bit 0 bidirectional I/O with software-programmable internal weak pull-up and wake-up from Sleep on pin change.
22 RB1 bidirectional PORTB bit 1 bidirectional I/O with software-programmable internal weak pull-up and wake-up from Sleep on pin change.
23 RB2 bidirectional PORTB bit 2 bidirectional I/O with software-programmable internal weak pull-up and wake-up from Sleep on pin change.
24 RB3/C1OUT bidirectional PORTB bit 3 bidirectional I/O with programmable weak pull-up and wake-up on pin change, also Comparator 1 output C1OUT.
25 RB4/C2OUT bidirectional PORTB bit 4 bidirectional I/O with programmable weak pull-up and wake-up on pin change, also Comparator 2 output C2OUT.
26 RB5 bidirectional PORTB bit 5 bidirectional I/O with software-programmable internal weak pull-up and wake-up from Sleep on pin change.
27 RB6/ICSPCLK bidirectional PORTB bit 6 bidirectional I/O with programmable weak pull-up and wake-up on pin change, also ICSP clock input ICSPCLK (Schmitt Trigger).
28 RB7/ICSPDAT bidirectional PORTB bit 7 bidirectional I/O with programmable weak pull-up and wake-up on pin change, also ICSP data pin ICSPDAT, with C1IN- and CVREF2 functions listed in the pinout table.

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package SSOP-28-208mil
Category Single Chip Microcomputer/Microcontroller
Pins 28

CAD (KiCad official)

  • Symbol: PIC16F570-I
  • Footprint: Package_SO:SSOP-28_5.3x10.2mm_P0.65mm
  • 3D model: SSOP-28-208mil (KiCad packages3D, STEP)
  • 3D model files: pic16f570-i-etched.step / pic16f570-i-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pic16f570-i.step / pic16f570-i.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (129 pp, sha256 fa2404eac578d16b, retrieved 2026-10-30, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF

Other parts in this family

This page is PIC16F570-I/SS. These part numbers share its family name but are different parts (another package, rating or grade), each with its own page:

  • PIC16F570-I/SP