3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownMAX9918ASA+T
Analog Devices Inc Maxim Integrated · Current Sense Amplifiers · SOIC-8-EP
MAX9918ASA+T from Analog Devices Inc Maxim Integrated, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | RS+ | input | Positive current-sensing input. Power side of the external sense resistor. Common-mode range -20V to +75V (VCC=5V). Typical common-mode input resistance 300kΩ; input bias current ±175µA (typ) at TA=+25°C. |
| 2 | RS- | input | Negative current-sensing input. Load side of the external sense resistor. Full-scale differential sense voltage (VRS+ - VRS-) = 50mV; ±15V differential absolute maximum. Differential input resistance ~715Ω. |
| 3 | SHDN | input | Active-high shutdown input. Drive high (VIH ≥ 2.0V) to enter low-power shutdown (ICC_SHDN = 0.5µA typ). Connect to GND (VIL ≤ 0.8V) for normal operation. Absolute maximum -0.3V to +20V. |
| 4 | GND | power_in | Ground return for the device. Tie to system ground; use a single-point star ground for best current-measurement accuracy. |
| 5 | OUT | output | Current-sense amplifier output. VOUT is proportional to VSENSE (VOUT = VSENSE × G). Rail-to-rail; short-circuit current ~44mA to VCC, ~41mA to GND. Output resistance ~0.1Ω. Keep OUT ≥100mV from either rail for rated accuracy. |
| 6 | FB | input | Feedback input for the internal instrumentation amplifier. Connect to the R1/R2 resistive-divider network between OUT and REFIN to set the gain: G = 1 + (R2/R1). Minimum adjustable gain 30V/V. |
| 7 | REFIN | input | Reference input for the output stage. Drive with a low-source-impedance reference: set REFIN = GND for unidirectional operation, or REFIN = VCC/2 for bidirectional operation. Allowed range 0V to VCC - 1.9V. REFIN current ±100µA (max). |
| 8 | VCC | power_in | 5V supply input (operating range 4.5V to 5.5V). Bypass to GND with a 0.1µF ceramic capacitor. Typical supply current 0.7-1.0mA; 0.5µA typ in shutdown. |
| EP | EP | power_in | Exposed thermal pad. Connect to a large-area contiguous ground plane for improved power dissipation and electrical performance. Do not use as the sole ground connection for the part. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices Inc Maxim Integrated |
| Package | SOIC-8-EP |
| Category | Amplifiers/Comparators |
| Pins | 9 |
Ordering variants
Same part, different packaging or reel option.
MAX9918ASA+TMAX9918ASA+TASA/V+
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VCC to GND | -0.3 | 6 | V | 2 | |||
| RS+, RS- to GND | -30 | 80 | V | VCC = 5V | 2 | ||
| RS+, RS- to GND | -15 | 80 | V | VCC = 0V (15 minutes) | 2 | ||
| Differential input voltage (VRS+ - VRS-) (MAX9918/MAX9919) | -15 | 15 | V | Continuous | 2 | ||
| REFIN, FB, OUT to GND | -0.3 | V | 2 | ||||
| SHDN to GND | -0.3 | 20 | V | 2 | |||
| Continuous current into any pin | -20 | 20 | mA | Not to exceed package power dissipation | 2 | ||
| Junction temperature | 150 | °C | 2 | ||||
| Storage temperature range | -65 | 150 | °C | 2 | |||
| Lead temperature (soldering) | 300 | °C | 10s | 2 | |||
| Soldering temperature (reflow) | 260 | °C | 2 | ||||
| Continuous power dissipation (8-Pin SO-EP) | 1951.2 | mW | TA = +70°C; derate 24.4mW/°C above +70°C | 2 | |||
| Junction-to-ambient thermal resistance, four-layer board | θJA | 41 | °C/W | JEDEC JESD51-7, four-layer board | 2 | ||
| Junction-to-case thermal resistance, four-layer board | θJC | 7 | °C/W | JEDEC JESD51-7, four-layer board | 2 | ||
| Junction-to-ambient thermal resistance, single-layer board | θJA | 52 | °C/W | Single-layer board | 2 | ||
| Junction-to-case thermal resistance, single-layer board | θJC | 6 | °C/W | Single-layer board | 2 | ||
| Common-mode range | VCM | -20 | 75 | V | Inferred from CMRR tests | 4 | |
| Input offset voltage | VOS | -0.4 | 0.14 | 0.4 | mV | VRS+ = VRS- = +14V, VREFIN = 0V, TA = +25°C | 3 |
| Input offset voltage | VOS | -0.7 | 0.7 | mV | VRS+ = VRS- = +14V, VREFIN = 0V, TA = -40°C to +125°C | 3 | |
| Input offset voltage | VOS | -0.4 | 0.08 | 0.4 | mV | VRS+ = VRS- = -2V, VREFIN = 0V, TA = +25°C | 3 |
| Input offset voltage | VOS | -1.3 | 1.3 | mV | VRS+ = VRS- = -2V, VREFIN = 0V, TA = -40°C to +125°C | 3 | |
| Common-mode rejection ratio | CMRR | 80 | dB | MAX9918: -2V ≤ VCM ≤ +14V | 4 | ||
| Common-mode rejection ratio | CMRR | 96 | dB | MAX9918: -20V ≤ VCM ≤ +75V | 4 | ||
| Input bias current | IRS+, IRS- | -175 | 175 | µA | -20V ≤ VCM ≤ +75V, TA = +25°C | 4 | |
| Input bias current | IRS+, IRS- | -250 | 250 | µA | -20V ≤ VCM ≤ +75V, TA = -40°C to +125°C | 4 | |
| Input offset current (IRS+ - IRS-) | -8 | 0 | 8 | µA | 4 | ||
| Input leakage current in shutdown | -30 | 30 | µA | -20V ≤ VCM ≤ +75V, VSHDN = VCC = 5V | 4 | ||
| Input leakage current | -30 | 30 | µA | VRS+ = VRS- = +14V, +75V, VCC = 0V | 4 | ||
| Minimum adjustable gain | GADJ | 30 | V/V | MAX9918 | 4 | ||
| Gain error | GE | -0.6 | 0.08 | 0.6 | % | VRS+ = VRS- = +14V, VREFIN = 0V, TA = +25°C | 5 |
| Gain error | GE | -1.2 | 1.2 | % | VRS+ = VRS- = +14V, VREFIN = 0V, TA = -40°C to +125°C | 5 | |
| Gain error | GE | -0.6 | 0.02 | 0.6 | % | VRS+ = VRS- = -2V, VREFIN = 0V, TA = +25°C | 5 |
| Gain error | GE | -1 | 1 | % | VRS+ = VRS- = -2V, VREFIN = 0V, TA = -40°C to +125°C | 5 | |
| Output-voltage high | VCC - VOH | 3 | 10 | mV | VSENSE = 200mV, RL = 100kΩ to GND | 5 | |
| Output-voltage high | VCC - VOH | 12 | 40 | mV | VSENSE = 200mV, RL = 10kΩ to GND | 5 | |
| Output-voltage low | VOL | 3 | 10 | mV | VSENSE = -200mV, RL = 100kΩ to VCC | 5 | |
| Output-voltage low | VOL | 10 | 40 | mV | VSENSE = -200mV, RL = 10kΩ to VCC | 5 | |
| REFIN voltage range | 0 | V | Inferred from REFIN CMRR test | 5 | |||
| REFIN common-mode rejection ratio | REFINCMRR | 82 | 103 | dB | 0V ≤ VREFIN ≤ (VCC - 1.9V) | 6 | |
| REFIN current | IREFIN | -100 | 100 | µA | VRS+ = VRS- = ±50mV | 6 | |
| SHDN logic-high | VIH | 2 | V | 6 | |||
| SHDN logic-low | VIL | 0.8 | V | 6 | |||
| Supply voltage range | VCC | 4.5 | 5.5 | V | Inferred from PSRR test | 6 | |
| Power-supply rejection ratio | PSRR | 74 | 103 | dB | 4.5V ≤ VCC ≤ 5.5V | 6 | |
| Supply current | ICC | 0.7 | 1.2 | mA | VRS+ = VRS- = +14V, TA = +25°C | 6 | |
| Supply current | ICC | 1.5 | mA | VRS+ = VRS- = +14V, TA = -40°C to +125°C | 6 | ||
| Supply current | ICC | 1 | 1.6 | mA | VRS+ = VRS- = -2V, TA = +25°C | 6 | |
| Supply current | ICC | 2.2 | mA | VRS+ = VRS- = -2V, TA = -40°C to +125°C | 6 | ||
| Shutdown supply current | ICC_SHDN | 0.5 | 10 | µA | VSHDN = VCC = 5V | 6 | |
| Max capacitive load | 50 | pF | No sustained oscillations | 7 | |||
| Input resistance, common mode | 300 | kΩ | Common mode | 4 | |||
| Input resistance, differential | 715 | Ω | Differential | 4 | |||
| Full-scale sense voltage | VSENSE | 50 | mV | Inferred from gain error test | 4 | ||
| Short-circuit current, OUT shorted to VCC | ISC | 44 | mA | OUT shorted to VCC | 5 | ||
| Short-circuit current, OUT shorted to GND | ISC | 41 | mA | OUT shorted to GND | 5 | ||
| Output resistance | ROUT | 0.1 | Ω | 5 | |||
| SHDN logic input current | 5 | µA | 0 ≤ VSHDN ≤ VCC | 6 | |||
| Small-signal -3dB bandwidth | BW | 75 | kHz | MAX9918, VSENSE = 50mV | 6 | ||
| Slew rate | SR | 0.6 | V/µs | MAX9918 | 6 | ||
| 1% settling time from VSENSE step | 12 | µs | MAX9918, VSENSE = 5mV to 50mV step | 6 | |||
| Input-referred noise voltage density | en | 60 | nV/√Hz | 10kHz, MAX9918 | 7 |
CAD (KiCad official)
- Symbol:
MAX9918ASA+T - Footprint:
Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm - 3D model: SOIC-8-EP (KiCad packages3D, STEP)
- 3D model files:
max9918asa-t-etched.step/max9918asa-t-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);max9918asa-t.step/max9918asa-t.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices Inc Maxim Integrated datasheet (None pp, sha256
f62a520074711291, retrieved 2026-08-17, tier: lcsc) - Extractor:
ds2sf(Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate. - CAD: KiCad official libraries (CC-BY-SA 4.0).