Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MAX9918ASA+T

Analog Devices Inc Maxim Integrated · Current Sense Amplifiers · SOIC-8-EP

MAX9918ASA+T from Analog Devices Inc Maxim Integrated, in a SOIC-8-EP. Pinout and pin descriptions extracted from the manufacturer datasheet by ds2sf; symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 RS+ input Positive current-sensing input. Power side of the external sense resistor. Common-mode range -20V to +75V (VCC=5V). Typical common-mode input resistance 300kΩ; input bias current ±175µA (typ) at TA=+25°C.
2 RS- input Negative current-sensing input. Load side of the external sense resistor. Full-scale differential sense voltage (VRS+ - VRS-) = 50mV; ±15V differential absolute maximum. Differential input resistance ~715Ω.
3 SHDN input Active-high shutdown input. Drive high (VIH ≥ 2.0V) to enter low-power shutdown (ICC_SHDN = 0.5µA typ). Connect to GND (VIL ≤ 0.8V) for normal operation. Absolute maximum -0.3V to +20V.
4 GND power_in Ground return for the device. Tie to system ground; use a single-point star ground for best current-measurement accuracy.
5 OUT output Current-sense amplifier output. VOUT is proportional to VSENSE (VOUT = VSENSE × G). Rail-to-rail; short-circuit current ~44mA to VCC, ~41mA to GND. Output resistance ~0.1Ω. Keep OUT ≥100mV from either rail for rated accuracy.
6 FB input Feedback input for the internal instrumentation amplifier. Connect to the R1/R2 resistive-divider network between OUT and REFIN to set the gain: G = 1 + (R2/R1). Minimum adjustable gain 30V/V.
7 REFIN input Reference input for the output stage. Drive with a low-source-impedance reference: set REFIN = GND for unidirectional operation, or REFIN = VCC/2 for bidirectional operation. Allowed range 0V to VCC - 1.9V. REFIN current ±100µA (max).
8 VCC power_in 5V supply input (operating range 4.5V to 5.5V). Bypass to GND with a 0.1µF ceramic capacitor. Typical supply current 0.7-1.0mA; 0.5µA typ in shutdown.
EP EP power_in Exposed thermal pad. Connect to a large-area contiguous ground plane for improved power dissipation and electrical performance. Do not use as the sole ground connection for the part.

Key specifications

Parameter Value
Manufacturer Analog Devices Inc Maxim Integrated
Package SOIC-8-EP
Category Amplifiers/Comparators
Pins 9

Ordering variants

Same part, different packaging or reel option.

  • MAX9918ASA+T
  • MAX9918ASA+TASA/V+

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VCC to GND -0.3 6 V 2
RS+, RS- to GND -30 80 V VCC = 5V 2
RS+, RS- to GND -15 80 V VCC = 0V (15 minutes) 2
Differential input voltage (VRS+ - VRS-) (MAX9918/MAX9919) -15 15 V Continuous 2
REFIN, FB, OUT to GND -0.3 V 2
SHDN to GND -0.3 20 V 2
Continuous current into any pin -20 20 mA Not to exceed package power dissipation 2
Junction temperature 150 °C 2
Storage temperature range -65 150 °C 2
Lead temperature (soldering) 300 °C 10s 2
Soldering temperature (reflow) 260 °C 2
Continuous power dissipation (8-Pin SO-EP) 1951.2 mW TA = +70°C; derate 24.4mW/°C above +70°C 2
Junction-to-ambient thermal resistance, four-layer board θJA 41 °C/W JEDEC JESD51-7, four-layer board 2
Junction-to-case thermal resistance, four-layer board θJC 7 °C/W JEDEC JESD51-7, four-layer board 2
Junction-to-ambient thermal resistance, single-layer board θJA 52 °C/W Single-layer board 2
Junction-to-case thermal resistance, single-layer board θJC 6 °C/W Single-layer board 2
Common-mode range VCM -20 75 V Inferred from CMRR tests 4
Input offset voltage VOS -0.4 0.14 0.4 mV VRS+ = VRS- = +14V, VREFIN = 0V, TA = +25°C 3
Input offset voltage VOS -0.7 0.7 mV VRS+ = VRS- = +14V, VREFIN = 0V, TA = -40°C to +125°C 3
Input offset voltage VOS -0.4 0.08 0.4 mV VRS+ = VRS- = -2V, VREFIN = 0V, TA = +25°C 3
Input offset voltage VOS -1.3 1.3 mV VRS+ = VRS- = -2V, VREFIN = 0V, TA = -40°C to +125°C 3
Common-mode rejection ratio CMRR 80 dB MAX9918: -2V ≤ VCM ≤ +14V 4
Common-mode rejection ratio CMRR 96 dB MAX9918: -20V ≤ VCM ≤ +75V 4
Input bias current IRS+, IRS- -175 175 µA -20V ≤ VCM ≤ +75V, TA = +25°C 4
Input bias current IRS+, IRS- -250 250 µA -20V ≤ VCM ≤ +75V, TA = -40°C to +125°C 4
Input offset current (IRS+ - IRS-) -8 0 8 µA 4
Input leakage current in shutdown -30 30 µA -20V ≤ VCM ≤ +75V, VSHDN = VCC = 5V 4
Input leakage current -30 30 µA VRS+ = VRS- = +14V, +75V, VCC = 0V 4
Minimum adjustable gain GADJ 30 V/V MAX9918 4
Gain error GE -0.6 0.08 0.6 % VRS+ = VRS- = +14V, VREFIN = 0V, TA = +25°C 5
Gain error GE -1.2 1.2 % VRS+ = VRS- = +14V, VREFIN = 0V, TA = -40°C to +125°C 5
Gain error GE -0.6 0.02 0.6 % VRS+ = VRS- = -2V, VREFIN = 0V, TA = +25°C 5
Gain error GE -1 1 % VRS+ = VRS- = -2V, VREFIN = 0V, TA = -40°C to +125°C 5
Output-voltage high VCC - VOH 3 10 mV VSENSE = 200mV, RL = 100kΩ to GND 5
Output-voltage high VCC - VOH 12 40 mV VSENSE = 200mV, RL = 10kΩ to GND 5
Output-voltage low VOL 3 10 mV VSENSE = -200mV, RL = 100kΩ to VCC 5
Output-voltage low VOL 10 40 mV VSENSE = -200mV, RL = 10kΩ to VCC 5
REFIN voltage range 0 V Inferred from REFIN CMRR test 5
REFIN common-mode rejection ratio REFINCMRR 82 103 dB 0V ≤ VREFIN ≤ (VCC - 1.9V) 6
REFIN current IREFIN -100 100 µA VRS+ = VRS- = ±50mV 6
SHDN logic-high VIH 2 V 6
SHDN logic-low VIL 0.8 V 6
Supply voltage range VCC 4.5 5.5 V Inferred from PSRR test 6
Power-supply rejection ratio PSRR 74 103 dB 4.5V ≤ VCC ≤ 5.5V 6
Supply current ICC 0.7 1.2 mA VRS+ = VRS- = +14V, TA = +25°C 6
Supply current ICC 1.5 mA VRS+ = VRS- = +14V, TA = -40°C to +125°C 6
Supply current ICC 1 1.6 mA VRS+ = VRS- = -2V, TA = +25°C 6
Supply current ICC 2.2 mA VRS+ = VRS- = -2V, TA = -40°C to +125°C 6
Shutdown supply current ICC_SHDN 0.5 10 µA VSHDN = VCC = 5V 6
Max capacitive load 50 pF No sustained oscillations 7
Input resistance, common mode 300 kΩ Common mode 4
Input resistance, differential 715 Ω Differential 4
Full-scale sense voltage VSENSE 50 mV Inferred from gain error test 4
Short-circuit current, OUT shorted to VCC ISC 44 mA OUT shorted to VCC 5
Short-circuit current, OUT shorted to GND ISC 41 mA OUT shorted to GND 5
Output resistance ROUT 0.1 Ω 5
SHDN logic input current 5 µA 0 ≤ VSHDN ≤ VCC 6
Small-signal -3dB bandwidth BW 75 kHz MAX9918, VSENSE = 50mV 6
Slew rate SR 0.6 V/µs MAX9918 6
1% settling time from VSENSE step 12 µs MAX9918, VSENSE = 5mV to 50mV step 6
Input-referred noise voltage density en 60 nV/√Hz 10kHz, MAX9918 7

CAD (KiCad official)

  • Symbol: MAX9918ASA+T
  • Footprint: Package_SO:SOIC-8-1EP_3.9x4.9mm_P1.27mm_EP2.29x3mm
  • 3D model: SOIC-8-EP (KiCad packages3D, STEP)
  • 3D model files: max9918asa-t-etched.step / max9918asa-t-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); max9918asa-t.step / max9918asa-t.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices Inc Maxim Integrated datasheet (None pp, sha256 f62a520074711291, retrieved 2026-08-17, tier: lcsc)
  • Extractor: ds2sf (Claude). Every pin and dimension is cited to a datasheet page; it refuses to fabricate.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF