Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

MIC2876-AYMT-T5

Microchip Tech · DC-DC Converters · DFN-8-EP(2x2)

MIC2876-AYMT-T5 from Microchip Tech, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 SW passive Boost converter switch node; connect the inductor between the IN and SW pins.
2 PGND power_in Power ground for the synchronous boost DC/DC converter power stage.
3 IN power_in Supply input (2.5V to 5.5V operating range); connect at least a 1 µF ceramic capacitor between IN and AGND.
4 AGND power_in Analog ground for the regulator control loop.
5 FB input Feedback pin for output voltage regulation in the adjustable version; connect to the feedback resistor divider.
6 EN input Boost converter enable; driving it low puts the IC in shutdown, it has an internal 2.5 MΩ pull-down resistor, and the output is disabled when left floating.
7 /PG output Open-drain active-low power good output with typical RDS(ON) of 90Ω that needs a 1 MΩ pull-up resistor and should be connected to AGND when unused.
8 OUT power_out Boost converter output.
9 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer Microchip Tech
Package DFN-8-EP(2x2)
Category Power Supply Chip
Pins 9

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply Voltage Range VIN 2.5 5.5 V 5
UVLO Rising Threshold VUVLOR 2.32 2.49 V 5
VIN Shutdown Current IVINSD 1 3 µA VEN = 0V, VIN = 5.5V, VOUT = 0V 5
VOUT Shutdown Current IVOUTSD 2 5 µA VEN = 0V, VIN = 0.3V, VOUT = 5.5V 5
Output Voltage VOUT 5.5 V 5
Feedback Voltage VFB 0.8865 0.9 0.9135 V Adjustable version, IOUT = 0A 5
Low-Side Switch Current Limit ILS 3.8 4.8 5.8 A VIN = 2.5V 5
Switch Leakage Current ISW 0.2 5 µA VEN = 0V, VIN = 5.5V 5
Oscillator Frequency FOSC 1.6 2 2.4 MHz 5
EN Threshold Voltage (ON) VEN 1.5 V Boost converter and chip logic ON 5
EN Threshold Voltage (OFF) VEN 0.4 V Boost converter and chip logic OFF 5
EN Pin Current 1.5 3 µA VIN = VEN = 3.6V 5
IN, EN, OUT, FB, /PG to PGND -0.3 6 V 4
AGND to PGND -0.3 0.3 V 4
ESD Rating (HBM) 1.5 kV Note 1: 1.5 kΩ in series with 100 pF 4
ESD Rating (MM) 200 V Note 1 4
Supply Voltage (operating) VIN 2.5 5.5 V 4
Output Voltage (operating) VOUT 5.5 V Up to 4
Enable Voltage (operating) VEN 0 V 0V to VIN 4
Junction Operating Temperature TJ -40 125 °C Note 1 7
Storage Temperature Range TS -65 150 °C 7
Lead Temperature 260 °C Soldering, 10s 7
Thermal Resistance, 8-Lead 2x2 UDFN θJA 90 °C/W 7
UVLO Hysteresis VUVLOH 200 mV 5
Quiescent Current IVIN 109 µA Non-switching 5
Line Regulation 0.3 %/V 2.5V < VIN < 4.5V, IOUT = 500 mA 5
Load Regulation 0.2 %/A IOUT = 200 mA to 1200 mA 5
Maximum Duty Cycle DMAX 92 % 5
Minimum Duty Cycle DMIN 6.5 % 5
Switch On-Resistance PMOS 79 mΩ VIN = 3.0V, ISW = 200 mA, VOUT = 5.0V 5
Switch On-Resistance NMOS 82 mΩ VIN = 3.0V, ISW = 200 mA, VOUT = 5.0V 5
Overtemperature Shutdown Threshold TSD 155 °C 5
Overtemperature Shutdown Hysteresis 15 °C 5
Soft-Start Time TSS 1.1 ms VOUT = 5.0V 5

Materials and finish

As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).

Part Material Colour / plating Datasheet says Page
contacts tin Note: Ultra-Thin DFN is an RoHS-compliant package. Lead finish is Pb￾free and Matte Tin. Mold compound is Halogen free. ▲ = UDFN Pin 1 identifier 25

CAD (KiCad official)

  • Symbol: MIC2876-AYMT-T5
  • Footprint: Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mm
  • 3D model: DFN-8-EP(2x2), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.55 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: mic2876-aymt-t5-etched.step / mic2876-aymt-t5-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); mic2876-aymt-t5.step / mic2876-aymt-t5.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Microchip Tech datasheet (28 pp, sha256 9f9a04a1de2e27ce, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF