Generated by kicad-footprint-generator · KiCad file format 20260206
MIC2876-AYMT-T5
Microchip Tech · DC-DC Converters · DFN-8-EP(2x2)
MIC2876-AYMT-T5 from Microchip Tech, in a DFN-8-EP(2x2). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | SW | passive | Boost converter switch node; connect the inductor between the IN and SW pins. |
| 2 | PGND | power_in | Power ground for the synchronous boost DC/DC converter power stage. |
| 3 | IN | power_in | Supply input (2.5V to 5.5V operating range); connect at least a 1 µF ceramic capacitor between IN and AGND. |
| 4 | AGND | power_in | Analog ground for the regulator control loop. |
| 5 | FB | input | Feedback pin for output voltage regulation in the adjustable version; connect to the feedback resistor divider. |
| 6 | EN | input | Boost converter enable; driving it low puts the IC in shutdown, it has an internal 2.5 MΩ pull-down resistor, and the output is disabled when left floating. |
| 7 | /PG | output | Open-drain active-low power good output with typical RDS(ON) of 90Ω that needs a 1 MΩ pull-up resistor and should be connected to AGND when unused. |
| 8 | OUT | power_out | Boost converter output. |
| 9 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Microchip Tech |
| Package | DFN-8-EP(2x2) |
| Category | Power Supply Chip |
| Pins | 9 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply Voltage Range | VIN | 2.5 | 5.5 | V | 5 | ||
| UVLO Rising Threshold | VUVLOR | 2.32 | 2.49 | V | 5 | ||
| VIN Shutdown Current | IVINSD | 1 | 3 | µA | VEN = 0V, VIN = 5.5V, VOUT = 0V | 5 | |
| VOUT Shutdown Current | IVOUTSD | 2 | 5 | µA | VEN = 0V, VIN = 0.3V, VOUT = 5.5V | 5 | |
| Output Voltage | VOUT | 5.5 | V | 5 | |||
| Feedback Voltage | VFB | 0.8865 | 0.9 | 0.9135 | V | Adjustable version, IOUT = 0A | 5 |
| Low-Side Switch Current Limit | ILS | 3.8 | 4.8 | 5.8 | A | VIN = 2.5V | 5 |
| Switch Leakage Current | ISW | 0.2 | 5 | µA | VEN = 0V, VIN = 5.5V | 5 | |
| Oscillator Frequency | FOSC | 1.6 | 2 | 2.4 | MHz | 5 | |
| EN Threshold Voltage (ON) | VEN | 1.5 | V | Boost converter and chip logic ON | 5 | ||
| EN Threshold Voltage (OFF) | VEN | 0.4 | V | Boost converter and chip logic OFF | 5 | ||
| EN Pin Current | 1.5 | 3 | µA | VIN = VEN = 3.6V | 5 | ||
| IN, EN, OUT, FB, /PG to PGND | -0.3 | 6 | V | 4 | |||
| AGND to PGND | -0.3 | 0.3 | V | 4 | |||
| ESD Rating (HBM) | 1.5 | kV | Note 1: 1.5 kΩ in series with 100 pF | 4 | |||
| ESD Rating (MM) | 200 | V | Note 1 | 4 | |||
| Supply Voltage (operating) | VIN | 2.5 | 5.5 | V | 4 | ||
| Output Voltage (operating) | VOUT | 5.5 | V | Up to | 4 | ||
| Enable Voltage (operating) | VEN | 0 | V | 0V to VIN | 4 | ||
| Junction Operating Temperature | TJ | -40 | 125 | °C | Note 1 | 7 | |
| Storage Temperature Range | TS | -65 | 150 | °C | 7 | ||
| Lead Temperature | 260 | °C | Soldering, 10s | 7 | |||
| Thermal Resistance, 8-Lead 2x2 UDFN | θJA | 90 | °C/W | 7 | |||
| UVLO Hysteresis | VUVLOH | 200 | mV | 5 | |||
| Quiescent Current | IVIN | 109 | µA | Non-switching | 5 | ||
| Line Regulation | 0.3 | %/V | 2.5V < VIN < 4.5V, IOUT = 500 mA | 5 | |||
| Load Regulation | 0.2 | %/A | IOUT = 200 mA to 1200 mA | 5 | |||
| Maximum Duty Cycle | DMAX | 92 | % | 5 | |||
| Minimum Duty Cycle | DMIN | 6.5 | % | 5 | |||
| Switch On-Resistance PMOS | 79 | mΩ | VIN = 3.0V, ISW = 200 mA, VOUT = 5.0V | 5 | |||
| Switch On-Resistance NMOS | 82 | mΩ | VIN = 3.0V, ISW = 200 mA, VOUT = 5.0V | 5 | |||
| Overtemperature Shutdown Threshold | TSD | 155 | °C | 5 | |||
| Overtemperature Shutdown Hysteresis | 15 | °C | 5 | ||||
| Soft-Start Time | TSS | 1.1 | ms | VOUT = 5.0V | 5 |
Materials and finish
As the datasheet states them (page.json metadata.appearance; the 3D model's colours follow it).
| Part | Material | Colour / plating | Datasheet says | Page |
|---|---|---|---|---|
| contacts | tin | Note: Ultra-Thin DFN is an RoHS-compliant package. Lead finish is Pbfree and Matte Tin. Mold compound is Halogen free. ▲ = UDFN Pin 1 identifier | 25 |
CAD (KiCad official)
- Symbol:
MIC2876-AYMT-T5 - Footprint:
Package_DFN_QFN:DFN-8-1EP_2x2mm_P0.5mm_EP0.6x1.2mm - 3D model: DFN-8-EP(2x2), generated from the KiCad footprint (body from the F.Fab outline, terminals on the pads, 0.55 mm tall, datasheet A, nominal). Neither the vendor nor KiCad ships a 3D model for this package, so the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
mic2876-aymt-t5-etched.step/mic2876-aymt-t5-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);mic2876-aymt-t5.step/mic2876-aymt-t5.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Microchip Tech datasheet (28 pp, sha256
9f9a04a1de2e27ce, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).