3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
README
markdownSL24C04D
Slkor(SLKORMICRO Elec.) · EEPROM · SOP-8
SL24C04D from Slkor(SLKORMICRO Elec.), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | NC | unconnected | Not connected on the SL24C04; the datasheet states that A0 is unused on the 24C04 and may be tied to ground. |
| 2 | A1 | input | Hardware device-address input; on the SL24C04, A2 and A1 are the address inputs that allow up to four 24C04 devices on one bus. |
| 3 | A2 | input | Hardware device-address input; on the SL24C04, A2 and A1 are the address inputs that allow up to four 24C04 devices on one bus. |
| 4 | GND | power_in | Ground reference for the device. |
| 5 | SDA | bidirectional | Serial data line of the I2C bus; data changes while SCL is low, and START and STOP conditions are defined by SDA transitions while SCL is high. |
| 6 | SCL | input | Serial clock input of the I2C bus; the datasheet gives maximum bus clock of 1 MHz at 5 V and 400 kHz at 1.8 V, 2.5 V and 2.7 V. |
| 7 | WP | input | Write-protect pin shown on the 8-pin SOP pinout; the extracted datasheet text does not describe its protection behavior. |
| 8 | VCC | power_in | Supply voltage, specified in the datasheet's recommended operating conditions as 1.8 V minimum to 5.5 V maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Slkor(SLKORMICRO Elec.) |
| Package | SOP-8 |
| Category | Memory |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage (VCC) range | 1.8 | 5.5 | V | 2 | |||
| Operating ambient temperature range | TA | -40 | 85 | °C | 2 | ||
| Supply voltage absolute maximum | -0.3 | 6.5 | V | 2 | |||
| Storage temperature | TSTG | -65 | 150 | °C | 2 | ||
| ESD voltage, human body model | VESD | 2500 | V | Human body model | 2 | ||
| ESD voltage, machine model | VESD | 200 | V | Machine model | 2 | ||
| Operating current (read) | ICC | 1 | mA | VCC=5V, 100kHz | 3 | ||
| Operating current (write) | ICC | 3 | mA | VCC=5V, 100kHz | 3 | ||
| Standby current | ISB | 3 | µA | VCC=5V, VIN=VCC or GND | 3 | ||
| Standby current | ISB | 1 | µA | VCC=1.8V, VIN=VCC or GND | 3 | ||
| Input leakage current | ILI | 0.05 | µA | VIN=VCC or GND | 3 | ||
| Input low-level voltage | VIL | -0.6 | V | Max printed as VCC×0.3 | 3 | ||
| Output low-level voltage | VOL3 | 0.4 | V | VCC=5.0V, IOL=3.0mA | 3 | ||
| Output low-level voltage | VOL1 | 0.2 | V | VCC=1.8V, IOL=0.15mA | 3 | ||
| SCL clock frequency | fSCL | 400 | kHz | VCC=1.8V | 3 | ||
| SCL clock frequency | fSCL | 1000 | kHz | VCC=5V | 3 | ||
| Noise suppression time | tI | 50 | ns | 3 | |||
| Bus free time between STOP and START | tBUF | 1.2 | µs | VCC=1.8V | 3 | ||
| Bus free time between STOP and START | tBUF | 0.5 | µs | VCC=5V | 3 | ||
| SCL low to SDA data out valid | tAA | 0.9 | µs | VCC=1.8V | 3 | ||
| SCL low to SDA data out valid | tAA | 0.55 | µs | VCC=5V | 3 | ||
| Write cycle time | tWR | 5 | ms | 4 |
CAD (KiCad official)
- Symbol:
SL24C04D - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOP-8 (KiCad packages3D, STEP)
- 3D model files:
sl24c04d-etched.step/sl24c04d-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);sl24c04d.step/sl24c04d.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Slkor(SLKORMICRO Elec.) datasheet (14 pp, sha256
1355d40c822d6a91, retrieved 2026-11-05, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).