main
Download ZIP Propose a change
Generated by kicad-footprint-generator · KiCad file format 20260206
Name Last commit message Last updated
docs Publish 0.1.0 · Ray
viewers sl24c04d: viewers · Ray
package.json Publish 0.1.1 · Ray
page.json Publish 0.1.1 · Ray
README.md Publish 0.1.0 · Ray
sl24c04d-etched.glb Publish 0.1.0 · Ray
sl24c04d-etched.step sl24c04d: factory component page (tier=lcsc) · Ray
sl24c04d-hero.glb sl24c04d: hero GLB from the etched model (keeps the MPN mark) · Ray
sl24c04d-hero.overlay.json Publish 0.1.0 · Ray
sl24c04d.glb Publish 0.1.0 · Ray
sl24c04d.kicad_mod Publish 0.1.0 · Ray
sl24c04d.kicad_sym Publish 0.1.0 · Ray
sl24c04d.lbr Publish 0.1.0 · Ray
sl24c04d.step Publish 0.1.0 · Ray
verification.json Verified: Published by the parts factory: tier lcsc, 8 pins · Ray

SL24C04D

Slkor(SLKORMICRO Elec.) · EEPROM · SOP-8

SL24C04D from Slkor(SLKORMICRO Elec.), in a SOP-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 NC unconnected Not connected on the SL24C04; the datasheet states that A0 is unused on the 24C04 and may be tied to ground.
2 A1 input Hardware device-address input; on the SL24C04, A2 and A1 are the address inputs that allow up to four 24C04 devices on one bus.
3 A2 input Hardware device-address input; on the SL24C04, A2 and A1 are the address inputs that allow up to four 24C04 devices on one bus.
4 GND power_in Ground reference for the device.
5 SDA bidirectional Serial data line of the I2C bus; data changes while SCL is low, and START and STOP conditions are defined by SDA transitions while SCL is high.
6 SCL input Serial clock input of the I2C bus; the datasheet gives maximum bus clock of 1 MHz at 5 V and 400 kHz at 1.8 V, 2.5 V and 2.7 V.
7 WP input Write-protect pin shown on the 8-pin SOP pinout; the extracted datasheet text does not describe its protection behavior.
8 VCC power_in Supply voltage, specified in the datasheet's recommended operating conditions as 1.8 V minimum to 5.5 V maximum.

Key specifications

Parameter Value
Manufacturer Slkor(SLKORMICRO Elec.)
Package SOP-8
Category Memory
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage (VCC) range 1.8 5.5 V 2
Operating ambient temperature range TA -40 85 °C 2
Supply voltage absolute maximum -0.3 6.5 V 2
Storage temperature TSTG -65 150 °C 2
ESD voltage, human body model VESD 2500 V Human body model 2
ESD voltage, machine model VESD 200 V Machine model 2
Operating current (read) ICC 1 mA VCC=5V, 100kHz 3
Operating current (write) ICC 3 mA VCC=5V, 100kHz 3
Standby current ISB 3 µA VCC=5V, VIN=VCC or GND 3
Standby current ISB 1 µA VCC=1.8V, VIN=VCC or GND 3
Input leakage current ILI 0.05 µA VIN=VCC or GND 3
Input low-level voltage VIL -0.6 V Max printed as VCC×0.3 3
Output low-level voltage VOL3 0.4 V VCC=5.0V, IOL=3.0mA 3
Output low-level voltage VOL1 0.2 V VCC=1.8V, IOL=0.15mA 3
SCL clock frequency fSCL 400 kHz VCC=1.8V 3
SCL clock frequency fSCL 1000 kHz VCC=5V 3
Noise suppression time tI 50 ns 3
Bus free time between STOP and START tBUF 1.2 µs VCC=1.8V 3
Bus free time between STOP and START tBUF 0.5 µs VCC=5V 3
SCL low to SDA data out valid tAA 0.9 µs VCC=1.8V 3
SCL low to SDA data out valid tAA 0.55 µs VCC=5V 3
Write cycle time tWR 5 ms 4

CAD (KiCad official)

  • Symbol: SL24C04D
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOP-8 (KiCad packages3D, STEP)
  • 3D model files: sl24c04d-etched.step / sl24c04d-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); sl24c04d.step / sl24c04d.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Slkor(SLKORMICRO Elec.) datasheet (14 pp, sha256 1355d40c822d6a91, retrieved 2026-11-05, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF