Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

PCA9552BS

NXP Semicon · LED Drivers · HVQFN-24-EP(4x4)

PCA9552BS from NXP Semicon, in a HVQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 LED0 bidirectional Open-drain LED driver 0 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver.
2 LED1 bidirectional Open-drain LED driver 1 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver.
3 LED2 bidirectional Open-drain LED driver 2 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver.
4 LED3 bidirectional Open-drain LED driver 3 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver.
5 LED4 bidirectional Open-drain LED driver 4 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver.
6 LED5 bidirectional Open-drain LED driver 5 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver.
7 LED6 bidirectional Open-drain LED driver 6 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver.
8 LED7 bidirectional Open-drain LED driver 7 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver.
9 VSS power_in Ground supply that must be connected to supply ground for proper device operation; it is also connected to the exposed center pad in the HVQFN package.
10 LED8 bidirectional Open-drain LED driver 8 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver.
11 LED9 bidirectional Open-drain LED driver 9 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver.
12 LED10 bidirectional Open-drain LED driver 10 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver.
13 LED11 bidirectional Open-drain LED driver 11 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver.
14 LED12 bidirectional Open-drain LED driver 12 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver.
15 LED13 bidirectional Open-drain LED driver 13 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver.
16 LED14 bidirectional Open-drain LED driver 14 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver.
17 LED15 bidirectional Open-drain LED driver 15 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver.
18 RESET input Active LOW hardware reset input that, together with power-on reset, initializes the registers to their default state.
19 SCL input Serial clock line of the I2C-bus interface, operating at 0 Hz to 400 kHz clock frequency.
20 SDA bidirectional Serial data line of the I2C-bus interface, compatible with SMBus.
21 VDD power_in Supply voltage with an operating range of 2.3 V to 5.5 V.
22 A0 input Hardware address input 0 that must be pulled HIGH or LOW because no internal pull-up resistor is provided.
23 A1 input Hardware address input 1 that must be pulled HIGH or LOW because no internal pull-up resistor is provided.
24 A2 input Hardware address input 2 that must be pulled HIGH or LOW because no internal pull-up resistor is provided.
25 EP passive Exposed pad (from the footprint; not named in the datasheet pin table).

Key specifications

Parameter Value
Manufacturer NXP Semicon
Package HVQFN-24-EP(4x4)
Category Display Modules / LED Drivers / Display Drivers
Pins 25

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
VDD supply voltage VDD -0.5 6 V 13
VI/O voltage on an input/output pin VI/O -0.5 5.5 V LEDn used as an I/O 13
output current on pin LEDn IO(LEDn) -25 25 mA LEDn used as an I/O 13
ground supply current ISS 200 mA 13
total power dissipation Ptot 400 mW 13
storage temperature Tstg -65 150 °C 13
ambient temperature operating Tamb -40 85 °C operating 13
supply voltage VDD 2.3 5.5 V 13
supply current IDD 350 550 μA Operating mode; VDD = 5.5 V; no load; VI = VDD or VSS; fSCL = 100 kHz 13
standby current Istb 2.1 5 μA Standby mode; VDD = 5.5 V; no load; VI = VDD or VSS; fSCL = 0 kHz 13
additional standby current ΔIstb 2 mA Standby mode; VDD = 5.5 V; every LED I/O at VI = 4.3 V; fSCL = 0 kHz 13
power-on reset voltage VPOR 1.7 2.2 V VDD = 3.3 V; no load; VI = VDD or VSS 13
LOW-level input voltage (SCL, SDA) VIL -0.5 V 13
HIGH-level input voltage (SCL, SDA) VIH 5.5 V 13
LOW-level output current (SDA) IOL 3 6.5 mA VOL = 0.4 V 13
leakage current (SCL, SDA) IL -1 1 μA VI = VDD = VSS 13
input capacitance (SCL) Ci 4.4 5 pF VI = VSS 13
LOW-level input voltage (I/Os) VIL -0.5 0.8 V 13
HIGH-level input voltage (I/Os) VIH 2 5.5 V 13
LOW-level output current (I/Os) IOL 9 mA VOL = 0.4 V; VDD = 2.3 V 13
LOW-level output current (I/Os) IOL 12 mA VOL = 0.4 V; VDD = 3.0 V 13
LOW-level output current (I/Os) IOL 15 mA VOL = 0.4 V; VDD = 5.0 V 13
LOW-level output current (I/Os) IOL 20 mA VOL = 0.7 V; VDD = 3.0 V 14
LOW-level output current (I/Os) IOL 25 mA VOL = 0.7 V; VDD = 5.0 V 14
input leakage current (I/Os) ILI -1 1 μA VDD = 3.6 V; VI = 0 V or VDD 14
input/output capacitance Cio 2.6 5 pF 14
LOW-level input voltage (A0, A1, A2, RESET) VIL -0.5 0.8 V 14
HIGH-level input voltage (A0, A1, A2, RESET) VIH 2 5.5 V 14
input leakage current (A0, A1, A2, RESET) ILI -1 1 μA 14
input capacitance (A0, A1, A2, RESET) Ci 2.3 5 pF VI = VSS 14
SCL clock frequency fSCL 0 100 kHz Standard mode I2C-bus 14
SCL clock frequency fSCL 0 400 kHz Fast mode I2C-bus 14
bus free time between a STOP and START condition tBUF 4.7 μs Standard mode I2C-bus 14
bus free time between a STOP and START condition tBUF 1.3 μs Fast mode I2C-bus 14
hold time (repeated) START condition tHD;STA 4 μs Standard mode I2C-bus 15
hold time (repeated) START condition tHD;STA 0.6 μs Fast mode I2C-bus 15
set-up time for a repeated START condition tSU;STA 4.7 μs Standard mode I2C-bus 15
set-up time for a repeated START condition tSU;STA 0.6 μs Fast mode I2C-bus 15
set-up time for STOP condition tSU;STO 4 μs Standard mode I2C-bus 15
set-up time for STOP condition tSU;STO 0.6 μs Fast mode I2C-bus 15
data valid acknowledge time tVD;ACK 600 ns Standard and fast mode I2C-bus 15
data valid time LOW-level tVD;DAT 600 ns LOW-level; Standard and fast mode I2C-bus 15
data valid time HIGH-level tVD;DAT 1500 ns HIGH-level; Standard mode I2C-bus 15
data valid time HIGH-level tVD;DAT 600 ns HIGH-level; Fast mode I2C-bus 15
data set-up time tSU;DAT 250 ns Standard mode I2C-bus 15
data set-up time tSU;DAT 100 ns Fast mode I2C-bus 15
LOW period of the SCL clock tLOW 4.7 μs Standard mode I2C-bus 15
LOW period of the SCL clock tLOW 1.3 μs Fast mode I2C-bus 15
HIGH period of the SCL clock tHIGH 4 μs Standard mode I2C-bus 15
HIGH period of the SCL clock tHIGH 0.6 μs Fast mode I2C-bus 15
fall time of both SDA and SCL signals tf 300 ns Standard and fast mode I2C-bus 15
rise time of both SDA and SCL signals tr 1000 ns Standard mode I2C-bus 15
rise time of both SDA and SCL signals tr 300 ns Fast mode I2C-bus 15
pulse width of spikes that must be suppressed by the input filter tSP 50 ns Standard and fast mode I2C-bus 15
data output valid time tv(Q) 250 ns 15
data input setup time tsu(D) 100 ns 15
data input hold time th(D) 1 μs 15
reset pulse width tw(rst) 10 ns 15
reset time trst 400 ns 15

CAD (KiCad official)

  • Symbol: PCA9552BS
  • Footprint: Package_DFN_QFN:HVQFN-24-1EP_4x4mm_P0.5mm_EP2.1x2.1mm
  • 3D model: HVQFN-24-EP(4x4) (KiCad packages3D, STEP)
  • 3D model files: pca9552bs-etched.step / pca9552bs-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); pca9552bs.step / pca9552bs.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: NXP Semicon datasheet (28 pp, sha256 60c6c92d3101036a, retrieved 2026-11-12, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF