Generated by kicad-footprint-generator · KiCad file format 20260206
PCA9552BS
NXP Semicon · LED Drivers · HVQFN-24-EP(4x4)
PCA9552BS from NXP Semicon, in a HVQFN-24-EP(4x4). Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | LED0 | bidirectional | Open-drain LED driver 0 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver. |
| 2 | LED1 | bidirectional | Open-drain LED driver 1 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver. |
| 3 | LED2 | bidirectional | Open-drain LED driver 2 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver. |
| 4 | LED3 | bidirectional | Open-drain LED driver 3 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver. |
| 5 | LED4 | bidirectional | Open-drain LED driver 4 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver. |
| 6 | LED5 | bidirectional | Open-drain LED driver 5 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver. |
| 7 | LED6 | bidirectional | Open-drain LED driver 6 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver. |
| 8 | LED7 | bidirectional | Open-drain LED driver 7 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver. |
| 9 | VSS | power_in | Ground supply that must be connected to supply ground for proper device operation; it is also connected to the exposed center pad in the HVQFN package. |
| 10 | LED8 | bidirectional | Open-drain LED driver 8 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver. |
| 11 | LED9 | bidirectional | Open-drain LED driver 9 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver. |
| 12 | LED10 | bidirectional | Open-drain LED driver 10 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver. |
| 13 | LED11 | bidirectional | Open-drain LED driver 11 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver. |
| 14 | LED12 | bidirectional | Open-drain LED driver 12 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver. |
| 15 | LED13 | bidirectional | Open-drain LED driver 13 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver. |
| 16 | LED14 | bidirectional | Open-drain LED driver 14 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver. |
| 17 | LED15 | bidirectional | Open-drain LED driver 15 sinks up to 25 mA per bit (200 mA per package) and can be used as a regular GPIO when not used as an LED driver. |
| 18 | RESET | input | Active LOW hardware reset input that, together with power-on reset, initializes the registers to their default state. |
| 19 | SCL | input | Serial clock line of the I2C-bus interface, operating at 0 Hz to 400 kHz clock frequency. |
| 20 | SDA | bidirectional | Serial data line of the I2C-bus interface, compatible with SMBus. |
| 21 | VDD | power_in | Supply voltage with an operating range of 2.3 V to 5.5 V. |
| 22 | A0 | input | Hardware address input 0 that must be pulled HIGH or LOW because no internal pull-up resistor is provided. |
| 23 | A1 | input | Hardware address input 1 that must be pulled HIGH or LOW because no internal pull-up resistor is provided. |
| 24 | A2 | input | Hardware address input 2 that must be pulled HIGH or LOW because no internal pull-up resistor is provided. |
| 25 | EP | passive | Exposed pad (from the footprint; not named in the datasheet pin table). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | NXP Semicon |
| Package | HVQFN-24-EP(4x4) |
| Category | Display Modules / LED Drivers / Display Drivers |
| Pins | 25 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| VDD supply voltage | VDD | -0.5 | 6 | V | 13 | ||
| VI/O voltage on an input/output pin | VI/O | -0.5 | 5.5 | V | LEDn used as an I/O | 13 | |
| output current on pin LEDn | IO(LEDn) | -25 | 25 | mA | LEDn used as an I/O | 13 | |
| ground supply current | ISS | 200 | mA | 13 | |||
| total power dissipation | Ptot | 400 | mW | 13 | |||
| storage temperature | Tstg | -65 | 150 | °C | 13 | ||
| ambient temperature operating | Tamb | -40 | 85 | °C | operating | 13 | |
| supply voltage | VDD | 2.3 | 5.5 | V | 13 | ||
| supply current | IDD | 350 | 550 | μA | Operating mode; VDD = 5.5 V; no load; VI = VDD or VSS; fSCL = 100 kHz | 13 | |
| standby current | Istb | 2.1 | 5 | μA | Standby mode; VDD = 5.5 V; no load; VI = VDD or VSS; fSCL = 0 kHz | 13 | |
| additional standby current | ΔIstb | 2 | mA | Standby mode; VDD = 5.5 V; every LED I/O at VI = 4.3 V; fSCL = 0 kHz | 13 | ||
| power-on reset voltage | VPOR | 1.7 | 2.2 | V | VDD = 3.3 V; no load; VI = VDD or VSS | 13 | |
| LOW-level input voltage (SCL, SDA) | VIL | -0.5 | V | 13 | |||
| HIGH-level input voltage (SCL, SDA) | VIH | 5.5 | V | 13 | |||
| LOW-level output current (SDA) | IOL | 3 | 6.5 | mA | VOL = 0.4 V | 13 | |
| leakage current (SCL, SDA) | IL | -1 | 1 | μA | VI = VDD = VSS | 13 | |
| input capacitance (SCL) | Ci | 4.4 | 5 | pF | VI = VSS | 13 | |
| LOW-level input voltage (I/Os) | VIL | -0.5 | 0.8 | V | 13 | ||
| HIGH-level input voltage (I/Os) | VIH | 2 | 5.5 | V | 13 | ||
| LOW-level output current (I/Os) | IOL | 9 | mA | VOL = 0.4 V; VDD = 2.3 V | 13 | ||
| LOW-level output current (I/Os) | IOL | 12 | mA | VOL = 0.4 V; VDD = 3.0 V | 13 | ||
| LOW-level output current (I/Os) | IOL | 15 | mA | VOL = 0.4 V; VDD = 5.0 V | 13 | ||
| LOW-level output current (I/Os) | IOL | 20 | mA | VOL = 0.7 V; VDD = 3.0 V | 14 | ||
| LOW-level output current (I/Os) | IOL | 25 | mA | VOL = 0.7 V; VDD = 5.0 V | 14 | ||
| input leakage current (I/Os) | ILI | -1 | 1 | μA | VDD = 3.6 V; VI = 0 V or VDD | 14 | |
| input/output capacitance | Cio | 2.6 | 5 | pF | 14 | ||
| LOW-level input voltage (A0, A1, A2, RESET) | VIL | -0.5 | 0.8 | V | 14 | ||
| HIGH-level input voltage (A0, A1, A2, RESET) | VIH | 2 | 5.5 | V | 14 | ||
| input leakage current (A0, A1, A2, RESET) | ILI | -1 | 1 | μA | 14 | ||
| input capacitance (A0, A1, A2, RESET) | Ci | 2.3 | 5 | pF | VI = VSS | 14 | |
| SCL clock frequency | fSCL | 0 | 100 | kHz | Standard mode I2C-bus | 14 | |
| SCL clock frequency | fSCL | 0 | 400 | kHz | Fast mode I2C-bus | 14 | |
| bus free time between a STOP and START condition | tBUF | 4.7 | μs | Standard mode I2C-bus | 14 | ||
| bus free time between a STOP and START condition | tBUF | 1.3 | μs | Fast mode I2C-bus | 14 | ||
| hold time (repeated) START condition | tHD;STA | 4 | μs | Standard mode I2C-bus | 15 | ||
| hold time (repeated) START condition | tHD;STA | 0.6 | μs | Fast mode I2C-bus | 15 | ||
| set-up time for a repeated START condition | tSU;STA | 4.7 | μs | Standard mode I2C-bus | 15 | ||
| set-up time for a repeated START condition | tSU;STA | 0.6 | μs | Fast mode I2C-bus | 15 | ||
| set-up time for STOP condition | tSU;STO | 4 | μs | Standard mode I2C-bus | 15 | ||
| set-up time for STOP condition | tSU;STO | 0.6 | μs | Fast mode I2C-bus | 15 | ||
| data valid acknowledge time | tVD;ACK | 600 | ns | Standard and fast mode I2C-bus | 15 | ||
| data valid time LOW-level | tVD;DAT | 600 | ns | LOW-level; Standard and fast mode I2C-bus | 15 | ||
| data valid time HIGH-level | tVD;DAT | 1500 | ns | HIGH-level; Standard mode I2C-bus | 15 | ||
| data valid time HIGH-level | tVD;DAT | 600 | ns | HIGH-level; Fast mode I2C-bus | 15 | ||
| data set-up time | tSU;DAT | 250 | ns | Standard mode I2C-bus | 15 | ||
| data set-up time | tSU;DAT | 100 | ns | Fast mode I2C-bus | 15 | ||
| LOW period of the SCL clock | tLOW | 4.7 | μs | Standard mode I2C-bus | 15 | ||
| LOW period of the SCL clock | tLOW | 1.3 | μs | Fast mode I2C-bus | 15 | ||
| HIGH period of the SCL clock | tHIGH | 4 | μs | Standard mode I2C-bus | 15 | ||
| HIGH period of the SCL clock | tHIGH | 0.6 | μs | Fast mode I2C-bus | 15 | ||
| fall time of both SDA and SCL signals | tf | 300 | ns | Standard and fast mode I2C-bus | 15 | ||
| rise time of both SDA and SCL signals | tr | 1000 | ns | Standard mode I2C-bus | 15 | ||
| rise time of both SDA and SCL signals | tr | 300 | ns | Fast mode I2C-bus | 15 | ||
| pulse width of spikes that must be suppressed by the input filter | tSP | 50 | ns | Standard and fast mode I2C-bus | 15 | ||
| data output valid time | tv(Q) | 250 | ns | 15 | |||
| data input setup time | tsu(D) | 100 | ns | 15 | |||
| data input hold time | th(D) | 1 | μs | 15 | |||
| reset pulse width | tw(rst) | 10 | ns | 15 | |||
| reset time | trst | 400 | ns | 15 |
CAD (KiCad official)
- Symbol:
PCA9552BS - Footprint:
Package_DFN_QFN:HVQFN-24-1EP_4x4mm_P0.5mm_EP2.1x2.1mm - 3D model: HVQFN-24-EP(4x4) (KiCad packages3D, STEP)
- 3D model files:
pca9552bs-etched.step/pca9552bs-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);pca9552bs.step/pca9552bs.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: NXP Semicon datasheet (28 pp, sha256
60c6c92d3101036a, retrieved 2026-11-12, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).