Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

RS8412PXK

Jiangsu RUNIC Tech · Operational Amplifier · SOIC-8

RS8412PXK from Jiangsu RUNIC Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 OUTA output Channel A output, rail-to-rail; output terminals are diode-clamped to the supply rails and outputs swinging more than 0.2V beyond the rails should be current-limited to ±100mA or less.
2 -INA input Channel A inverting input; input terminals are diode-clamped to the supply rails and signals more than 0.2V beyond the rails should be current-limited to 10mA or less.
3 +INA input Channel A noninverting input; common-mode range includes ground, specified from (V-)-0.1V to (V+)-2V at VS=±18V.
4 V- power_in Negative (lowest) power supply or ground for single-supply operation; supply range is 3V to 36V single-supply or ±1.5V to ±18V dual-supply.
5 +INB input Channel B noninverting input; common-mode range includes ground, specified from (V-)-0.1V to (V+)-2V at VS=±18V.
6 -INB input Channel B inverting input; input terminals are diode-clamped to the supply rails and signals more than 0.2V beyond the rails should be current-limited to 10mA or less.
7 OUTB output Channel B output, rail-to-rail; output terminals are diode-clamped to the supply rails and outputs swinging more than 0.2V beyond the rails should be current-limited to ±100mA or less.
8 V+ power_in Positive (highest) power supply; supply range is 3V to 36V single-supply or ±1.5V to ±18V dual-supply.

Key specifications

Parameter Value
Manufacturer Jiangsu RUNIC Tech
Package SOIC-8
Category Amplifiers/Comparators
Pins 8

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Operating voltage range (VS) VS 3 36 V 25°C 9
Input offset voltage Vos -4 0.5 4 mV VCM= VS/2, 25°C 9
Input offset voltage (full temperature range) Vos -1.1 1.1 mV VCM= VS/2, Full (-40°C to 125°C) 9
Power-supply rejection ratio PSRR 95 120 dB VS=5V to 36V, 25°C 9
Common-mode rejection ratio CMRR 70 110 dB VS=±2.5V, VCM=(V-)-0.1V to (V+)-2V, 25°C 9
Common-mode rejection ratio CMRR 70 dB VS=±18V, VCM=(V-)-0.1V to (V+)-2V, 25°C 9
Open-loop voltage gain AOL 83 115 dB RL=10KΩ, Vo=(V-)+0.6V to (V+)-0.6V, 25°C 9
Output swing high VOH 17.85 V VS=±18V, RL=10KΩ, 25°C 9
Output swing low VOL -17.85 V VS=±18V, RL=10KΩ, 25°C 9
Short-circuit current ISC -35 35 mA 25°C, momentary test 9
Capacitive load drive CLOAD 100 pF 25°C 9
Input bias current IB 10 60 pA VCM=0V, 25°C 9
Input bias current (full temperature range) IB 600 pA VCM=0V, Full 9
Input offset current IOS 10 60 pA VCM=0V, 25°C 9
Input offset current (full temperature range) IOS 600 pA VCM=0V, Full 9
Quiescent current per amplifier IQ 150 350 μA VS=±2.5V, Io=0mA, 25°C 9
Quiescent current per amplifier IQ 200 450 μA VS=±18V, Io=0mA, 25°C 9
Input offset voltage average drift Vos Tc 3 μV/°C Full 9
Short-circuit current (second printed value) ISC 80 mA 25°C, momentary test 9
Slew rate SR 0.67 V/μs G=+1, CL=100pF, 25°C 9
Gain-bandwidth product GBW 1.2 MHz 25°C 9
Setting time, 0.01% ts 5 μs VS=±2.5V, G=+1, CL=100pF, Step=2V, 25°C 9
Overload recovery time tOR 5 μs VIN·Gain≥VS, G=11, 25°C 9
Turn-on time tON 10 μs 25°C 9
Input voltage noise (0.1 Hz to 10 Hz) En 16 μVpp f = 0.1Hz to 10Hz, VS=±2.5V, 25°C 9
Input voltage noise density en 45 nV/√Hz f = 1KHz, 25°C 9
Supply voltage (absolute maximum) Vs -0.7 36 V Supply, Vs=(V+)-(V-) 8
Signal input pin current -10 10 mA Signal input pin 8
Signal output pin current -100 100 mA Signal output pin 8
Operating free-air temperature range TA -40 125 °C Operating range 8
Junction temperature TJ -40 150 °C Junction 8
Storage temperature Tstg -55 150 °C Storage 8
Package thermal impedance, junction to ambient (SOP8) θJA 110 °C/W SOP8, JESD-51 8
Supply voltage, single-supply Vs 3 36 V Single-supply, over operating free-air temperature range 8
Supply voltage, dual-supply Vs 1.5 18 V Dual-supply, over operating free-air temperature range 8

CAD (KiCad official)

  • Symbol: RS8412PXK
  • Footprint: Package_SO:SOIC-8_3.9x4.9mm_P1.27mm
  • 3D model: SOIC-8 (KiCad packages3D, STEP)
  • 3D model files: rs8412pxk-etched.step / rs8412pxk-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); rs8412pxk.step / rs8412pxk.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Jiangsu RUNIC Tech datasheet (19 pp, sha256 c83b07a99693d156, retrieved 2026-11-03, tier: lcsc)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF