Generated by kicad-footprint-generator · KiCad file format 20260206
RS8412PXK
Jiangsu RUNIC Tech · Operational Amplifier · SOIC-8
RS8412PXK from Jiangsu RUNIC Tech, in a SOIC-8. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | OUTA | output | Channel A output, rail-to-rail; output terminals are diode-clamped to the supply rails and outputs swinging more than 0.2V beyond the rails should be current-limited to ±100mA or less. |
| 2 | -INA | input | Channel A inverting input; input terminals are diode-clamped to the supply rails and signals more than 0.2V beyond the rails should be current-limited to 10mA or less. |
| 3 | +INA | input | Channel A noninverting input; common-mode range includes ground, specified from (V-)-0.1V to (V+)-2V at VS=±18V. |
| 4 | V- | power_in | Negative (lowest) power supply or ground for single-supply operation; supply range is 3V to 36V single-supply or ±1.5V to ±18V dual-supply. |
| 5 | +INB | input | Channel B noninverting input; common-mode range includes ground, specified from (V-)-0.1V to (V+)-2V at VS=±18V. |
| 6 | -INB | input | Channel B inverting input; input terminals are diode-clamped to the supply rails and signals more than 0.2V beyond the rails should be current-limited to 10mA or less. |
| 7 | OUTB | output | Channel B output, rail-to-rail; output terminals are diode-clamped to the supply rails and outputs swinging more than 0.2V beyond the rails should be current-limited to ±100mA or less. |
| 8 | V+ | power_in | Positive (highest) power supply; supply range is 3V to 36V single-supply or ±1.5V to ±18V dual-supply. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Jiangsu RUNIC Tech |
| Package | SOIC-8 |
| Category | Amplifiers/Comparators |
| Pins | 8 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Operating voltage range (VS) | VS | 3 | 36 | V | 25°C | 9 | |
| Input offset voltage | Vos | -4 | 0.5 | 4 | mV | VCM= VS/2, 25°C | 9 |
| Input offset voltage (full temperature range) | Vos | -1.1 | 1.1 | mV | VCM= VS/2, Full (-40°C to 125°C) | 9 | |
| Power-supply rejection ratio | PSRR | 95 | 120 | dB | VS=5V to 36V, 25°C | 9 | |
| Common-mode rejection ratio | CMRR | 70 | 110 | dB | VS=±2.5V, VCM=(V-)-0.1V to (V+)-2V, 25°C | 9 | |
| Common-mode rejection ratio | CMRR | 70 | dB | VS=±18V, VCM=(V-)-0.1V to (V+)-2V, 25°C | 9 | ||
| Open-loop voltage gain | AOL | 83 | 115 | dB | RL=10KΩ, Vo=(V-)+0.6V to (V+)-0.6V, 25°C | 9 | |
| Output swing high | VOH | 17.85 | V | VS=±18V, RL=10KΩ, 25°C | 9 | ||
| Output swing low | VOL | -17.85 | V | VS=±18V, RL=10KΩ, 25°C | 9 | ||
| Short-circuit current | ISC | -35 | 35 | mA | 25°C, momentary test | 9 | |
| Capacitive load drive | CLOAD | 100 | pF | 25°C | 9 | ||
| Input bias current | IB | 10 | 60 | pA | VCM=0V, 25°C | 9 | |
| Input bias current (full temperature range) | IB | 600 | pA | VCM=0V, Full | 9 | ||
| Input offset current | IOS | 10 | 60 | pA | VCM=0V, 25°C | 9 | |
| Input offset current (full temperature range) | IOS | 600 | pA | VCM=0V, Full | 9 | ||
| Quiescent current per amplifier | IQ | 150 | 350 | μA | VS=±2.5V, Io=0mA, 25°C | 9 | |
| Quiescent current per amplifier | IQ | 200 | 450 | μA | VS=±18V, Io=0mA, 25°C | 9 | |
| Input offset voltage average drift | Vos Tc | 3 | μV/°C | Full | 9 | ||
| Short-circuit current (second printed value) | ISC | 80 | mA | 25°C, momentary test | 9 | ||
| Slew rate | SR | 0.67 | V/μs | G=+1, CL=100pF, 25°C | 9 | ||
| Gain-bandwidth product | GBW | 1.2 | MHz | 25°C | 9 | ||
| Setting time, 0.01% | ts | 5 | μs | VS=±2.5V, G=+1, CL=100pF, Step=2V, 25°C | 9 | ||
| Overload recovery time | tOR | 5 | μs | VIN·Gain≥VS, G=11, 25°C | 9 | ||
| Turn-on time | tON | 10 | μs | 25°C | 9 | ||
| Input voltage noise (0.1 Hz to 10 Hz) | En | 16 | μVpp | f = 0.1Hz to 10Hz, VS=±2.5V, 25°C | 9 | ||
| Input voltage noise density | en | 45 | nV/√Hz | f = 1KHz, 25°C | 9 | ||
| Supply voltage (absolute maximum) | Vs | -0.7 | 36 | V | Supply, Vs=(V+)-(V-) | 8 | |
| Signal input pin current | -10 | 10 | mA | Signal input pin | 8 | ||
| Signal output pin current | -100 | 100 | mA | Signal output pin | 8 | ||
| Operating free-air temperature range | TA | -40 | 125 | °C | Operating range | 8 | |
| Junction temperature | TJ | -40 | 150 | °C | Junction | 8 | |
| Storage temperature | Tstg | -55 | 150 | °C | Storage | 8 | |
| Package thermal impedance, junction to ambient (SOP8) | θJA | 110 | °C/W | SOP8, JESD-51 | 8 | ||
| Supply voltage, single-supply | Vs | 3 | 36 | V | Single-supply, over operating free-air temperature range | 8 | |
| Supply voltage, dual-supply | Vs | 1.5 | 18 | V | Dual-supply, over operating free-air temperature range | 8 |
CAD (KiCad official)
- Symbol:
RS8412PXK - Footprint:
Package_SO:SOIC-8_3.9x4.9mm_P1.27mm - 3D model: SOIC-8 (KiCad packages3D, STEP)
- 3D model files:
rs8412pxk-etched.step/rs8412pxk-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);rs8412pxk.step/rs8412pxk.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Jiangsu RUNIC Tech datasheet (19 pp, sha256
c83b07a99693d156, retrieved 2026-11-03, tier: lcsc) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).