3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownAD8063ARTZ-REEL7
Analog Devices · Operational Amplifier · SOT-23-6
AD8063ARTZ-REEL7 from Analog Devices, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VOUT | output | Amplifier output with rail-to-rail swing, able to deliver up to 50 mA of load current. |
| 2 | -VS | power_in | Negative supply, or ground in single-supply operation; the supply operating range is 2.7 V to 8 V total. |
| 3 | +IN | input | Non-inverting input, with a common-mode range of -0.2 V to +3.2 V at VS = 5 V. |
| 4 | -IN | input | Inverting input; keep parasitic capacitance low and place the feedback resistor close to this pin. |
| 5 | DISABLE | input | Power-down control that cuts supply current to under 400 µA and puts the output in high impedance when pulled more than 2 V below the positive supply; floating leaves the part fully powered. |
| 6 | +VS | power_in | Positive supply, 2.7 V to 8 V operating range; bypass with a 0.1 µF ceramic capacitor within 3 mm of the pin. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Analog Devices |
| Package | SOT-23-6 |
| Category | Amplifiers |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Input Offset Voltage | VOS | 1 | 6 | mV | 3 | ||
| Input Offset Voltage TMIN to TMAX | VOS | 2 | 6 | mV | TMIN to TMAX | 3 | |
| Input Bias Current | IB | 3.5 | 9 | µA | 3 | ||
| Input Bias Current TMIN to TMAX | IB | 4 | 9 | µA | TMIN to TMAX | 3 | |
| Input Offset Current | IOS | 0.3 | 4.5 | µA | 3 | ||
| Open-Loop Gain (RL = 150 Ω) | AOL | 68 | 70 | dB | VO = 0.5 V to 4.5 V, RL = 150 Ω | 3 | |
| Open-Loop Gain (RL = 2 kΩ) | AOL | 74 | 90 | dB | VO = 0.5 V to 4.5 V, RL = 2 kΩ | 3 | |
| Common-Mode Rejection Ratio | CMRR | 62 | 80 | dB | VCM = -0.2 V to +3.2 V | 3 | |
| Output Voltage Swing Low (RL = 150 Ω) | VOL | 0.1 | 0.3 | V | RL = 150 Ω | 3 | |
| Output Voltage Swing Low (RL = 2 kΩ) | VOL | 0.1 | 0.25 | V | RL = 2 kΩ | 3 | |
| Output Voltage Swing High (RL = 150 Ω) | VOH | 4.75 | 4.86 | V | RL = 150 Ω | 3 | |
| Output Voltage Swing High (RL = 2 kΩ) | VOH | 4.85 | 4.9 | V | RL = 2 kΩ | 3 | |
| Output Current | IOUT | 25 | 50 | mA | VO = 0.5 V to 4.5 V | 3 | |
| Power Supply Operating Range | VS | 2.7 | 5 | 8 | V | 3 | |
| Quiescent Current per Amplifier | IQ | 6.8 | 9.5 | mA | 3 | ||
| Power Supply Rejection Ratio | PSRR | 72 | 80 | dB | ∆VS = 2.7 V to 5 V | 3 | |
| -3 dB Small Signal Bandwidth (G = 1) | BW | 150 | 320 | MHz | G = 1, VO = 0.2 V p-p | 3 | |
| -3 dB Small Signal Bandwidth (G = -1, +2) | BW | 60 | 115 | MHz | G = -1, +2, VO = 0.2 V p-p | 3 | |
| Slew Rate (G = 1) | SR | 500 | 650 | V/µs | G = 1, VO = 2 V step, RL = 2 kΩ | 3 | |
| Slew Rate (G = 2) | SR | 300 | 500 | V/µs | G = 2, VO = 2 V step, RL = 2 kΩ | 3 | |
| Supply Current when Disabled | 0.4 | mA | AD8063 only | 3 | |||
| Supply Voltage | VS | 8 | V | 6 | |||
| Internal Power Dissipation, 6-lead SOT-23 (RJ) | 0.5 | W | Device in free air | 6 | |||
| Storage Temperature Range | -65 | 125 | °C | R-8, RM-8, SOT-23-5, SOT-23-6 | 6 | ||
| Operating Temperature Range | -40 | 85 | °C | 6 | |||
| Lead Temperature | 300 | °C | Soldering, 10 sec | 6 | |||
| Thermal Resistance Junction to Ambient, 6-lead SOT-23 | θJA | 230 | °C/W | 6-Lead SOT-23 | 6 | ||
| Thermal Resistance Junction to Case, 6-lead SOT-23 | θJC | 92 | °C/W | 6-Lead SOT-23 | 6 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
AD8063ARTZ-REEL7 - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
ad8063artz-etched.step/ad8063artz-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);ad8063artz.step/ad8063artz.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Analog Devices datasheet (20 pp, sha256
5a8eb7e11b89b331, retrieved 2026-11-16, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-sonnet-5-5(text+vision), consensusclaude-opus-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).