Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

AD8063ARTZ-REEL7

Analog Devices · Operational Amplifier · SOT-23-6

AD8063ARTZ-REEL7 from Analog Devices, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.

Pinout

Pin Name Type Function
1 VOUT output Amplifier output with rail-to-rail swing, able to deliver up to 50 mA of load current.
2 -VS power_in Negative supply, or ground in single-supply operation; the supply operating range is 2.7 V to 8 V total.
3 +IN input Non-inverting input, with a common-mode range of -0.2 V to +3.2 V at VS = 5 V.
4 -IN input Inverting input; keep parasitic capacitance low and place the feedback resistor close to this pin.
5 DISABLE input Power-down control that cuts supply current to under 400 µA and puts the output in high impedance when pulled more than 2 V below the positive supply; floating leaves the part fully powered.
6 +VS power_in Positive supply, 2.7 V to 8 V operating range; bypass with a 0.1 µF ceramic capacitor within 3 mm of the pin.

Key specifications

Parameter Value
Manufacturer Analog Devices
Package SOT-23-6
Category Amplifiers
Pins 6

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Input Offset Voltage VOS 1 6 mV 3
Input Offset Voltage TMIN to TMAX VOS 2 6 mV TMIN to TMAX 3
Input Bias Current IB 3.5 9 µA 3
Input Bias Current TMIN to TMAX IB 4 9 µA TMIN to TMAX 3
Input Offset Current IOS 0.3 4.5 µA 3
Open-Loop Gain (RL = 150 Ω) AOL 68 70 dB VO = 0.5 V to 4.5 V, RL = 150 Ω 3
Open-Loop Gain (RL = 2 kΩ) AOL 74 90 dB VO = 0.5 V to 4.5 V, RL = 2 kΩ 3
Common-Mode Rejection Ratio CMRR 62 80 dB VCM = -0.2 V to +3.2 V 3
Output Voltage Swing Low (RL = 150 Ω) VOL 0.1 0.3 V RL = 150 Ω 3
Output Voltage Swing Low (RL = 2 kΩ) VOL 0.1 0.25 V RL = 2 kΩ 3
Output Voltage Swing High (RL = 150 Ω) VOH 4.75 4.86 V RL = 150 Ω 3
Output Voltage Swing High (RL = 2 kΩ) VOH 4.85 4.9 V RL = 2 kΩ 3
Output Current IOUT 25 50 mA VO = 0.5 V to 4.5 V 3
Power Supply Operating Range VS 2.7 5 8 V 3
Quiescent Current per Amplifier IQ 6.8 9.5 mA 3
Power Supply Rejection Ratio PSRR 72 80 dB ∆VS = 2.7 V to 5 V 3
-3 dB Small Signal Bandwidth (G = 1) BW 150 320 MHz G = 1, VO = 0.2 V p-p 3
-3 dB Small Signal Bandwidth (G = -1, +2) BW 60 115 MHz G = -1, +2, VO = 0.2 V p-p 3
Slew Rate (G = 1) SR 500 650 V/µs G = 1, VO = 2 V step, RL = 2 kΩ 3
Slew Rate (G = 2) SR 300 500 V/µs G = 2, VO = 2 V step, RL = 2 kΩ 3
Supply Current when Disabled 0.4 mA AD8063 only 3
Supply Voltage VS 8 V 6
Internal Power Dissipation, 6-lead SOT-23 (RJ) 0.5 W Device in free air 6
Storage Temperature Range -65 125 °C R-8, RM-8, SOT-23-5, SOT-23-6 6
Operating Temperature Range -40 85 °C 6
Lead Temperature 300 °C Soldering, 10 sec 6
Thermal Resistance Junction to Ambient, 6-lead SOT-23 θJA 230 °C/W 6-Lead SOT-23 6
Thermal Resistance Junction to Case, 6-lead SOT-23 θJC 92 °C/W 6-Lead SOT-23 6

CAD (land: KiCad; 3D: generated from the datasheet)

  • Symbol: AD8063ARTZ-REEL7
  • Footprint: Package_TO_SOT_SMD:SOT-23-6
  • 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.9 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
  • 3D model files: ad8063artz-etched.step / ad8063artz-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); ad8063artz.step / ad8063artz.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Analog Devices datasheet (20 pp, sha256 5a8eb7e11b89b331, retrieved 2026-11-16, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-sonnet-5-5 (text+vision), consensus claude-opus-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).

Datasheet PDF