Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

ISO7731QDBQRQ1

Texas Instruments · Digital Isolators · SSOP-16-150mil

ISO7731QDBQRQ1 from Texas Instruments, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 VCC1 power_in Power supply for the side 1 (input) circuitry; the absolute maximum supply voltage is 6 V with respect to GND1 (-0.5 V to 6 V).
2 GND1 power_in Ground connection for VCC1 (side 1 ground, also GNDI for the input side).
3 INA input Logic input for channel A; voltage at INx must stay between -0.5 V and VCCX + 0.5 V, not exceeding 6 V.
4 INB input Logic input for channel B; voltage at INx must stay between -0.5 V and VCCX + 0.5 V, not exceeding 6 V.
5 OUTC output Logic output for channel C on side 1; the output is in high-impedance state when EN1 is low.
6 NC unconnected Not connected internally.
7 EN1 input Output enable 1; side 1 outputs are enabled when EN1 is high or open and in high-impedance state when EN1 is low.
8 GND1 power_in Ground connection for VCC1 (side 1 ground).
9 GND2 power_in Ground connection for VCC2 (side 2 ground).
10 EN2 input Output enable 2; side 2 outputs are enabled when EN2 is high or open and in high-impedance state when EN2 is low.
11 NC unconnected Not connected internally.
12 INC input Logic input for channel C; voltage at INx must stay between -0.5 V and VCCX + 0.5 V, not exceeding 6 V.
13 OUTB output Logic output for channel B.
14 OUTA output Logic output for channel A.
15 GND2 power_in Ground connection for VCC2 (side 2 ground, also GNDO for the output side).
16 VCC2 power_in Power supply for the side 2 (output) circuitry; the absolute maximum supply voltage is 6 V with respect to GND2 (-0.5 V to 6 V).

Key specifications

Parameter Value
Manufacturer Texas Instruments
Package SSOP-16-150mil
Category Communication Interface Chip/UART/485/232
Pins 16

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
Supply voltage VCC1, VCC2 2.25 5.5 V 7
UVLO threshold when supply voltage is rising VCC(UVLO+) 2 2.25 V 7
UVLO threshold when supply voltage is falling VCC(UVLO-) 1.7 1.8 V 7
Supply voltage UVLO hysteresis VHYS(UVLO) 100 200 mV 7
High level output current IOH -4 mA VCCO = 5 V 7
Low level output current IOL 4 mA VCCO = 5 V 7
High-level input voltage VIH 0.7 x VCCI 7
Low-level input voltage VIL 0 0.3 x VCCI 7
Data rate DR 0 100 Mbps 7
Ambient temperature TA -55 25 125 °C 7
Supply voltage VCC1, VCC2 -0.5 6 V 6
Voltage at INx, OUTx, ENx V -0.5 V 6
Output current IO -15 15 mA 6
Junction temperature TJ 150 °C 6
Storage temperature Tstg -65 150 °C 6
Maximum power dissipation (both sides) PD 160 mW VCC1 = VCC2 = 5.5 V, TJ = 150°C, CL = 15 pF, input a 50-MHz 50% duty cycle square wave 8
Maximum power dissipation (side-1) PD1 60 mW 8
Maximum power dissipation (side-2) PD2 100 mW 8
Low-level output voltage VOL 0.2 0.4 V IOL = 4 mA; See Figure 6-1 13
Rising input switching threshold VIT+(IN) 0.6 0.7 x VCCI 13
Falling input switching threshold VIT-(IN) 0.3 0.4 x VCCI 13
Input threshold voltage hysteresis VI(HYS) 0.1 0.2 x VCCI 13
High-level input current at INx IIH 10 µA VIH = VCCI at INx 13
Low-level input current at INx IIL -10 µA VIL = 0 V at INx 13
High-level input current at ENx IIH 28 μA VIH = VCCI at ENx 13
Low-level input current at ENx IIL -28 μA VIL = 0 V at ENx 13
Common mode transient immunity CMTI 85 100 kV/µs VI = VCCI or 0 V, VCM = 1200 V; See Figure 6-4 13
Supply current - disable (ICC1) ICC1 0.8 2.2 mA EN1 = EN2 = 0 V; VI = VCCI (ISO7731-Q1) 14
Supply current - disable (ICC2) ICC2 0.7 1.6 mA EN1 = EN2 = 0 V; VI = VCCI (ISO7731-Q1) 14
Supply current - DC signal (ICC1) ICC1 1.3 2.9 mA EN1 = EN2 = VCCI; VI = VCCI (ISO7731-Q1) 14
Supply current - DC signal (ICC2) ICC2 1.6 3.7 mA EN1 = EN2 = VCCI; VI = VCCI (ISO7731-Q1) 14
Supply current - AC signal 1 Mbps (ICC1) ICC1 2.7 4.2 mA EN1 = EN2 = VCCI; all channels switching, square wave clock input; CL = 15 pF; 1 Mbps 14
Supply current - AC signal 1 Mbps (ICC2) ICC2 2.3 4.6 mA EN1 = EN2 = VCCI; all channels switching, square wave clock input; CL = 15 pF; 1 Mbps 14
Supply current - AC signal 10 Mbps (ICC1) ICC1 3 4.9 mA EN1 = EN2 = VCCI; all channels switching, square wave clock input; CL = 15 pF; 10 Mbps 14
Supply current - AC signal 10 Mbps (ICC2) ICC2 3.3 5.8 mA EN1 = EN2 = VCCI; all channels switching, square wave clock input; CL = 15 pF; 10 Mbps 14
Supply current - AC signal 100 Mbps (ICC1) ICC1 8.5 11.5 mA EN1 = EN2 = VCCI; all channels switching, square wave clock input; CL = 15 pF; 100 Mbps 14
Supply current - AC signal 100 Mbps (ICC2) ICC2 13.1 17.8 mA EN1 = EN2 = VCCI; all channels switching, square wave clock input; CL = 15 pF; 100 Mbps 14
Propagation delay time tPLH, tPHL 6 11 17 ns See Figure 6-1 19
Pulse width distortion PWD 0.6 5.9 ns /tPHL, tPLH/ 19
Channel-to-channel output skew time tsk(o) 4 ns Same-direction channels 19
Part-to-part skew time tsk(pp) 4.5 ns 19
Output signal rise time tr 1.3 3.9 ns See Figure 6-1 19
Output signal fall time tf 1.4 3.9 ns See Figure 6-1 19
Disable propagation delay, high-to-high impedance output tPHZ 8 22 ns See Figure 6-2 19
Disable propagation delay, low-to-high impedance output tPLZ 8 20 ns See Figure 6-2 19
Enable propagation delay, high impedance-to-high output for ISO773x tPZH 7 20 ns See Figure 6-2 19
Enable propagation delay, high impedance-to-low output for ISO773x tPZL 3 8.5 µs See Figure 6-2 19
Default output delay time from input power loss tDO 0.1 0.3 µs Measured from the time VCC goes below 1.7V. See Figure 6-3 19
High-level output voltage VOH 4.8 V IOH = -4 mA; See Figure 6-1 13
Input capacitance CI 2 pF VI = VCC/2 + 0.4×sin(2πft), f = 1 MHz, VCC = 5 V 13
Time interval error tie 0.6 ns 16, 1 PRBS data at 100 Mbps 19
Junction-to-ambient thermal resistance RθJA 109 °C/W DBQ (QSOP) 16 pins 8
Junction-to-case (top) thermal resistance RθJC(top) 46.8 °C/W DBQ (QSOP) 16 pins 8
Junction-to-board thermal resistance RθJB 60.6 °C/W DBQ (QSOP) 16 pins 8
Junction-to-top characterization parameter ψJT 35.9 °C/W DBQ (QSOP) 16 pins 8
Junction-to-board characterization parameter ψJB 60 °C/W DBQ (QSOP) 16 pins 8

CAD (KiCad official)

  • Symbol: ISO7731QDBQRQ1
  • Footprint: Package_SO:SSOP-16_3.9x4.9mm_P0.635mm
  • 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
  • 3D model files: iso7731qdbqrq1-etched.step / iso7731qdbqrq1-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); iso7731qdbqrq1.step / iso7731qdbqrq1.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: Texas Instruments datasheet (56 pp, sha256 ed9efa22c3bba080, retrieved 2026-11-13, tier: manufacturer)
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF