Generated by kicad-footprint-generator · KiCad file format 20260206
ISO7731QDBQRQ1
Texas Instruments · Digital Isolators · SSOP-16-150mil
ISO7731QDBQRQ1 from Texas Instruments, in a SSOP-16-150mil. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | VCC1 | power_in | Power supply for the side 1 (input) circuitry; the absolute maximum supply voltage is 6 V with respect to GND1 (-0.5 V to 6 V). |
| 2 | GND1 | power_in | Ground connection for VCC1 (side 1 ground, also GNDI for the input side). |
| 3 | INA | input | Logic input for channel A; voltage at INx must stay between -0.5 V and VCCX + 0.5 V, not exceeding 6 V. |
| 4 | INB | input | Logic input for channel B; voltage at INx must stay between -0.5 V and VCCX + 0.5 V, not exceeding 6 V. |
| 5 | OUTC | output | Logic output for channel C on side 1; the output is in high-impedance state when EN1 is low. |
| 6 | NC | unconnected | Not connected internally. |
| 7 | EN1 | input | Output enable 1; side 1 outputs are enabled when EN1 is high or open and in high-impedance state when EN1 is low. |
| 8 | GND1 | power_in | Ground connection for VCC1 (side 1 ground). |
| 9 | GND2 | power_in | Ground connection for VCC2 (side 2 ground). |
| 10 | EN2 | input | Output enable 2; side 2 outputs are enabled when EN2 is high or open and in high-impedance state when EN2 is low. |
| 11 | NC | unconnected | Not connected internally. |
| 12 | INC | input | Logic input for channel C; voltage at INx must stay between -0.5 V and VCCX + 0.5 V, not exceeding 6 V. |
| 13 | OUTB | output | Logic output for channel B. |
| 14 | OUTA | output | Logic output for channel A. |
| 15 | GND2 | power_in | Ground connection for VCC2 (side 2 ground, also GNDO for the output side). |
| 16 | VCC2 | power_in | Power supply for the side 2 (output) circuitry; the absolute maximum supply voltage is 6 V with respect to GND2 (-0.5 V to 6 V). |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Texas Instruments |
| Package | SSOP-16-150mil |
| Category | Communication Interface Chip/UART/485/232 |
| Pins | 16 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage | VCC1, VCC2 | 2.25 | 5.5 | V | 7 | ||
| UVLO threshold when supply voltage is rising | VCC(UVLO+) | 2 | 2.25 | V | 7 | ||
| UVLO threshold when supply voltage is falling | VCC(UVLO-) | 1.7 | 1.8 | V | 7 | ||
| Supply voltage UVLO hysteresis | VHYS(UVLO) | 100 | 200 | mV | 7 | ||
| High level output current | IOH | -4 | mA | VCCO = 5 V | 7 | ||
| Low level output current | IOL | 4 | mA | VCCO = 5 V | 7 | ||
| High-level input voltage | VIH | 0.7 | x VCCI | 7 | |||
| Low-level input voltage | VIL | 0 | 0.3 | x VCCI | 7 | ||
| Data rate | DR | 0 | 100 | Mbps | 7 | ||
| Ambient temperature | TA | -55 | 25 | 125 | °C | 7 | |
| Supply voltage | VCC1, VCC2 | -0.5 | 6 | V | 6 | ||
| Voltage at INx, OUTx, ENx | V | -0.5 | V | 6 | |||
| Output current | IO | -15 | 15 | mA | 6 | ||
| Junction temperature | TJ | 150 | °C | 6 | |||
| Storage temperature | Tstg | -65 | 150 | °C | 6 | ||
| Maximum power dissipation (both sides) | PD | 160 | mW | VCC1 = VCC2 = 5.5 V, TJ = 150°C, CL = 15 pF, input a 50-MHz 50% duty cycle square wave | 8 | ||
| Maximum power dissipation (side-1) | PD1 | 60 | mW | 8 | |||
| Maximum power dissipation (side-2) | PD2 | 100 | mW | 8 | |||
| Low-level output voltage | VOL | 0.2 | 0.4 | V | IOL = 4 mA; See Figure 6-1 | 13 | |
| Rising input switching threshold | VIT+(IN) | 0.6 | 0.7 | x VCCI | 13 | ||
| Falling input switching threshold | VIT-(IN) | 0.3 | 0.4 | x VCCI | 13 | ||
| Input threshold voltage hysteresis | VI(HYS) | 0.1 | 0.2 | x VCCI | 13 | ||
| High-level input current at INx | IIH | 10 | µA | VIH = VCCI at INx | 13 | ||
| Low-level input current at INx | IIL | -10 | µA | VIL = 0 V at INx | 13 | ||
| High-level input current at ENx | IIH | 28 | μA | VIH = VCCI at ENx | 13 | ||
| Low-level input current at ENx | IIL | -28 | μA | VIL = 0 V at ENx | 13 | ||
| Common mode transient immunity | CMTI | 85 | 100 | kV/µs | VI = VCCI or 0 V, VCM = 1200 V; See Figure 6-4 | 13 | |
| Supply current - disable (ICC1) | ICC1 | 0.8 | 2.2 | mA | EN1 = EN2 = 0 V; VI = VCCI (ISO7731-Q1) | 14 | |
| Supply current - disable (ICC2) | ICC2 | 0.7 | 1.6 | mA | EN1 = EN2 = 0 V; VI = VCCI (ISO7731-Q1) | 14 | |
| Supply current - DC signal (ICC1) | ICC1 | 1.3 | 2.9 | mA | EN1 = EN2 = VCCI; VI = VCCI (ISO7731-Q1) | 14 | |
| Supply current - DC signal (ICC2) | ICC2 | 1.6 | 3.7 | mA | EN1 = EN2 = VCCI; VI = VCCI (ISO7731-Q1) | 14 | |
| Supply current - AC signal 1 Mbps (ICC1) | ICC1 | 2.7 | 4.2 | mA | EN1 = EN2 = VCCI; all channels switching, square wave clock input; CL = 15 pF; 1 Mbps | 14 | |
| Supply current - AC signal 1 Mbps (ICC2) | ICC2 | 2.3 | 4.6 | mA | EN1 = EN2 = VCCI; all channels switching, square wave clock input; CL = 15 pF; 1 Mbps | 14 | |
| Supply current - AC signal 10 Mbps (ICC1) | ICC1 | 3 | 4.9 | mA | EN1 = EN2 = VCCI; all channels switching, square wave clock input; CL = 15 pF; 10 Mbps | 14 | |
| Supply current - AC signal 10 Mbps (ICC2) | ICC2 | 3.3 | 5.8 | mA | EN1 = EN2 = VCCI; all channels switching, square wave clock input; CL = 15 pF; 10 Mbps | 14 | |
| Supply current - AC signal 100 Mbps (ICC1) | ICC1 | 8.5 | 11.5 | mA | EN1 = EN2 = VCCI; all channels switching, square wave clock input; CL = 15 pF; 100 Mbps | 14 | |
| Supply current - AC signal 100 Mbps (ICC2) | ICC2 | 13.1 | 17.8 | mA | EN1 = EN2 = VCCI; all channels switching, square wave clock input; CL = 15 pF; 100 Mbps | 14 | |
| Propagation delay time | tPLH, tPHL | 6 | 11 | 17 | ns | See Figure 6-1 | 19 |
| Pulse width distortion | PWD | 0.6 | 5.9 | ns | /tPHL, tPLH/ | 19 | |
| Channel-to-channel output skew time | tsk(o) | 4 | ns | Same-direction channels | 19 | ||
| Part-to-part skew time | tsk(pp) | 4.5 | ns | 19 | |||
| Output signal rise time | tr | 1.3 | 3.9 | ns | See Figure 6-1 | 19 | |
| Output signal fall time | tf | 1.4 | 3.9 | ns | See Figure 6-1 | 19 | |
| Disable propagation delay, high-to-high impedance output | tPHZ | 8 | 22 | ns | See Figure 6-2 | 19 | |
| Disable propagation delay, low-to-high impedance output | tPLZ | 8 | 20 | ns | See Figure 6-2 | 19 | |
| Enable propagation delay, high impedance-to-high output for ISO773x | tPZH | 7 | 20 | ns | See Figure 6-2 | 19 | |
| Enable propagation delay, high impedance-to-low output for ISO773x | tPZL | 3 | 8.5 | µs | See Figure 6-2 | 19 | |
| Default output delay time from input power loss | tDO | 0.1 | 0.3 | µs | Measured from the time VCC goes below 1.7V. See Figure 6-3 | 19 | |
| High-level output voltage | VOH | 4.8 | V | IOH = -4 mA; See Figure 6-1 | 13 | ||
| Input capacitance | CI | 2 | pF | VI = VCC/2 + 0.4×sin(2πft), f = 1 MHz, VCC = 5 V | 13 | ||
| Time interval error | tie | 0.6 | ns | 16, 1 PRBS data at 100 Mbps | 19 | ||
| Junction-to-ambient thermal resistance | RθJA | 109 | °C/W | DBQ (QSOP) 16 pins | 8 | ||
| Junction-to-case (top) thermal resistance | RθJC(top) | 46.8 | °C/W | DBQ (QSOP) 16 pins | 8 | ||
| Junction-to-board thermal resistance | RθJB | 60.6 | °C/W | DBQ (QSOP) 16 pins | 8 | ||
| Junction-to-top characterization parameter | ψJT | 35.9 | °C/W | DBQ (QSOP) 16 pins | 8 | ||
| Junction-to-board characterization parameter | ψJB | 60 | °C/W | DBQ (QSOP) 16 pins | 8 |
CAD (KiCad official)
- Symbol:
ISO7731QDBQRQ1 - Footprint:
Package_SO:SSOP-16_3.9x4.9mm_P0.635mm - 3D model: SSOP-16-150mil (KiCad packages3D, STEP)
- 3D model files:
iso7731qdbqrq1-etched.step/iso7731qdbqrq1-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);iso7731qdbqrq1.step/iso7731qdbqrq1.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Texas Instruments datasheet (56 pp, sha256
ed9efa22c3bba080, retrieved 2026-11-13, tier: manufacturer) - Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).