Loads when you scroll to it. Unloads after 5 minutes in the background.

Symbol & Footprint

Schematic Symbol

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.

PCB Footprint

Open full view ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Loads when you scroll to it. Unloads after 5 minutes in the background.
Download PDF
Contents

README

markdown

TM1818-SSOP24

TM(Shenzhen Titan Micro Elec) · LED Drivers · SSOP-24

TM1818-SSOP24 from TM(Shenzhen Titan Micro Elec), in a SSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.

Pinout

Pin Name Type Function
1 GND power_in Ground for control logic and the constant-current drive return path.
2 SDI input Serial data input with Schmitt-trigger buffer, shifted in on the rising edge of CLK with a 25 MHz maximum clock frequency.
3 CLK input Serial shift clock input with Schmitt-trigger buffer; data shifts on the rising edge, up to 25 MHz.
4 LE input Latch enable input with Schmitt-trigger buffer; serial data passes to the input latch while LE is high and is latched when LE is low.
5 OUT0 output Constant-current sink output rated 2-60 mA at VCC=5 V; outputs may be shorted together to increase current, with an output voltage limit of -0.4 to +6.0 V.
6 OUT1 output Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V.
7 OUT2 output Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V.
8 OUT3 output Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V.
9 OUT4 output Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V.
10 OUT5 output Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V.
11 OUT6 output Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V.
12 OUT7 output Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V.
13 OUT8 output Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V.
14 OUT9 output Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V.
15 OUT10 output Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V.
16 OUT11 output Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V.
17 OUT12 output Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V.
18 OUT13 output Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V.
19 OUT14 output Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V.
20 OUT15 output Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V.
21 OE input Output enable input: outputs OUT0-OUT15 are on when OE is low and off when OE is high, with an internal pull-up to VCC of 32-48 kΩ.
22 SDO output Serial data output updated on the CLK rising edge, intended to feed the SDI pin of the next device in the chain.
23 R-EXT bidirectional Constant-current setting pin: an external resistor to GND sets the OUT0-OUT15 current, with a reference voltage of 1.10-1.22 V at 470 Ω.
24 VCC power_in Chip supply voltage, specified from 3.0 V to 5.5 V with a 6.0 V absolute maximum.

Key specifications

Parameter Value
Manufacturer TM(Shenzhen Titan Micro Elec)
Package SSOP-24
Category LED Drivers
Pins 24

Electrical characteristics

Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).

Parameter Symbol Min Typ Max Unit Conditions Page
电源电压 VCC -0.4 6 V 4
输入端电压范围 VIN -0.4 V SDI,CLK,LE,OE 4
输出端电流(DC) IOUT 65 mA OUT0~OUT15 4
输出端电压范围 VOUT -0.4 6 V OUT0~OUT15,SDO 4
时钟频率 FCLK 25 MHZ CLK,SDI,LE,OE 4
工作温度范围 Torp -40 85 ℃ 4
储存温度范围 Ttsg -55 150 ℃ 4
人体模式(HBM)ESD 4000 V Human body model (HBM) 4
机器模式(MM)ESD 300 V Machine model (MM) 4
电源电压 VCC 3 5 5.5 V 5
输出端耐压范围 VO 5.5 V OUT0~OUT15 5
高电平输出电流 IOH -8 mA VCC=5V,SDO=4.5V 5
低电平输出电流 IOL 16 mA VCC=5V,SDO=0.5V 5
恒定输出灌电流 IOLC 2 45 mA OUT0~OUT15 3V≤VCC≤3.6V 5
恒定输出灌电流 IOLC 2 60 mA OUT0~OUT15 3.6V≤VCC≤5.5V 5
工作温度范围 TA -40 85 ℃ 5
工作结温范围 TJ -40 125 ℃ 5
数据移位时钟频率 FCLK 25 MHZ CLK 5
脉冲持续时间 TWH0 15 ns CLK 5
脉冲持续时间 TWH1 25 ns LE 5
脉冲持续时间 TWH2 60 ns OE 5
脉冲持续时间 TWL2 30 ns OE 5
时间建立 TSU0 5 ns SDI, CLK↑ 5
时间建立 TSU1 12 ns LE↓- CLK↑ 5
时间保持 TH0 5 ns SDI, CLK↑ 5
时间保持 TH1 12 ns LE↓- CLK↑ 5
低电平输出电压 VOL 0.4 V IOL=10mA:SDO 6
输入电流 IIN -1 1 uA VIN=接 VCC 或者 GND SDI,CLK,LE,OE 6
电源电流(VCC) ICC0 11 12 mA SDI/CLK/LE=0,OE=1 ,Riref=开路 6
电源电流(VCC) ICC1 12 13 mA SDI/CLK/LE=0,OE=1 ,Riref=1.2K 6
电源电流(VCC) ICC2 15 16 mA OUT0~OUT15 开,SDI,CLK,LE,OE=0, Riref =470Ω 6
电源电流(VCC) ICC3 13 14 mA OUT0~OUT15 开,SDI,CLK,LE,OE=0, Riref =1.2K 6
恒定输出电流 IOLO 36.3 37 37.7 mA OUT0~OUT15 开,VOUTn=1V=VOUTfix=1V,Riref=470Ω,VCC=5V,TA=25℃ 6
输出漏电流 LOLKG 0.1 uA OUTn=OFF,VOUTn=VOUTfix=5.5V,OE=1,Riref=1.5K 6
恒流误差(通道对通道) ΔIOLC0 -1.5 1 1.5 % OUT0~OUT15 开,VOUTn=1V=VOUTfix=1V,Riref=470Ω 6
恒流误差(芯片对芯片) ΔIOLC1 -2 1.5 2 % OUT0OUT15 开,VOUTn=1V=VOUTfix=1V,Riref=1.5K,VCC=3V5V,TA=25℃ 6
线性调整 ΔIOLC2 -1 0.5 1 %/V OUT0OUT15 开,VOUTn=1V=VOUTfix=1V,Riref=470Ω,VCC=3V5 V 6
负载调整 ΔIOLC3 -3 1 3 %/V OUT0OUT15 开,VOUTn=1V3V,VOUTfix=1V,Riref=470Ω 6
基准电压输出 VIREF 1.1 1.16 1.22 V Riref=470Ω,TA=25℃ 6
上拉电阻 RPUP 32 40 48 kΩ OE 6
下拉电阻 RPDWN 32 40 48 kΩ LE 6
上升时间 TR0 50 100 nS SDO 7
上升时间 TR1 80 160 nS OUTn 7
下降时间 TF0 50 100 nS SDO 7
下降时间 TF1 80 160 nS OUTn 7
传输延迟时间 TD0 60 120 nS CLK↑至 SDO↑↓ 7
传输延迟时间 TD1 100 150 nS LE↑或 OE↑↓至 OUT0/OUT7/OUT8/OUT15 开/关 7
传输延迟时间 TD2 120 170 nS LE↑或 OE↑↓至 OUT1/OUT6/OUT9/OUT14 开/关 7
传输延迟时间 TD3 140 190 nS LE↑或 OE↑↓至 OUT2/OUT5/OUT10/OUT13 开/关 7
传输延迟时间 TD4 160 210 nS LE↑或 OE↑↓至 OUT3/OUT4/OUT11/OUT12 开/关 7
输出误差时间 TON_ERR -50 50 nS 7

CAD (KiCad official)

  • Symbol: TM1818-SSOP24
  • Footprint: Package_SO:SSOP-24_5.3x8.2mm_P0.65mm
  • 3D model: SSOP-24 (KiCad packages3D, STEP)
  • 3D model files: tm1818-ssop24-etched.step / tm1818-ssop24-etched.glb carry the MPN laser-etched on the die in a toggleable Adom.LaserEtch group (Fusion-ready); tm1818-ssop24.step / tm1818-ssop24.glb are the bare package body.

Provenance

Data extracted from the manufacturer datasheet, not a distributor listing:

  • Datasheet: TM(Shenzhen Titan Micro Elec) datasheet (10 pp, sha256 c5f901cc7c57906a, retrieved 2026-10-28, tier: lcsc)
  • Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
  • Extractor: parts-factory 2.0.0 / extract_pins 0.3, primary claude-haiku-5-5 (text), consensus claude-sonnet-5-5 (agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish.
  • CAD: KiCad official libraries (CC-BY-SA 4.0).

Datasheet PDF