Generated by kicad-footprint-generator · KiCad file format 20260206
TM1818-SSOP24
TM(Shenzhen Titan Micro Elec) · LED Drivers · SSOP-24
TM1818-SSOP24 from TM(Shenzhen Titan Micro Elec), in a SSOP-24. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model); symbol, footprint, and 3D from KiCad-official CAD.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | GND | power_in | Ground for control logic and the constant-current drive return path. |
| 2 | SDI | input | Serial data input with Schmitt-trigger buffer, shifted in on the rising edge of CLK with a 25 MHz maximum clock frequency. |
| 3 | CLK | input | Serial shift clock input with Schmitt-trigger buffer; data shifts on the rising edge, up to 25 MHz. |
| 4 | LE | input | Latch enable input with Schmitt-trigger buffer; serial data passes to the input latch while LE is high and is latched when LE is low. |
| 5 | OUT0 | output | Constant-current sink output rated 2-60 mA at VCC=5 V; outputs may be shorted together to increase current, with an output voltage limit of -0.4 to +6.0 V. |
| 6 | OUT1 | output | Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V. |
| 7 | OUT2 | output | Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V. |
| 8 | OUT3 | output | Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V. |
| 9 | OUT4 | output | Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V. |
| 10 | OUT5 | output | Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V. |
| 11 | OUT6 | output | Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V. |
| 12 | OUT7 | output | Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V. |
| 13 | OUT8 | output | Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V. |
| 14 | OUT9 | output | Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V. |
| 15 | OUT10 | output | Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V. |
| 16 | OUT11 | output | Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V. |
| 17 | OUT12 | output | Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V. |
| 18 | OUT13 | output | Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V. |
| 19 | OUT14 | output | Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V. |
| 20 | OUT15 | output | Constant-current sink output rated 2-60 mA at VCC=5 V, with an output voltage limit of -0.4 to +6.0 V. |
| 21 | OE | input | Output enable input: outputs OUT0-OUT15 are on when OE is low and off when OE is high, with an internal pull-up to VCC of 32-48 kΩ. |
| 22 | SDO | output | Serial data output updated on the CLK rising edge, intended to feed the SDI pin of the next device in the chain. |
| 23 | R-EXT | bidirectional | Constant-current setting pin: an external resistor to GND sets the OUT0-OUT15 current, with a reference voltage of 1.10-1.22 V at 470 Ω. |
| 24 | VCC | power_in | Chip supply voltage, specified from 3.0 V to 5.5 V with a 6.0 V absolute maximum. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | TM(Shenzhen Titan Micro Elec) |
| Package | SSOP-24 |
| Category | LED Drivers |
| Pins | 24 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| 电源电压 | VCC | -0.4 | 6 | V | 4 | ||
| 输入端电压范围 | VIN | -0.4 | V | SDI,CLK,LE,OE | 4 | ||
| 输出端电流(DC) | IOUT | 65 | mA | OUT0~OUT15 | 4 | ||
| 输出端电压范围 | VOUT | -0.4 | 6 | V | OUT0~OUT15,SDO | 4 | |
| 时钟频率 | FCLK | 25 | MHZ | CLK,SDI,LE,OE | 4 | ||
| 工作温度范围 | Torp | -40 | 85 | ℃ | 4 | ||
| 储存温度范围 | Ttsg | -55 | 150 | ℃ | 4 | ||
| 人体模式(HBM)ESD | 4000 | V | Human body model (HBM) | 4 | |||
| 机器模式(MM)ESD | 300 | V | Machine model (MM) | 4 | |||
| 电源电压 | VCC | 3 | 5 | 5.5 | V | 5 | |
| 输出端耐压范围 | VO | 5.5 | V | OUT0~OUT15 | 5 | ||
| 高电平输出电流 | IOH | -8 | mA | VCC=5V,SDO=4.5V | 5 | ||
| 低电平输出电流 | IOL | 16 | mA | VCC=5V,SDO=0.5V | 5 | ||
| 恒定输出灌电流 | IOLC | 2 | 45 | mA | OUT0~OUT15 3V≤VCC≤3.6V | 5 | |
| 恒定输出灌电流 | IOLC | 2 | 60 | mA | OUT0~OUT15 3.6V≤VCC≤5.5V | 5 | |
| 工作温度范围 | TA | -40 | 85 | ℃ | 5 | ||
| 工作结温范围 | TJ | -40 | 125 | ℃ | 5 | ||
| 数据移位时钟频率 | FCLK | 25 | MHZ | CLK | 5 | ||
| 脉冲持续时间 | TWH0 | 15 | ns | CLK | 5 | ||
| 脉冲持续时间 | TWH1 | 25 | ns | LE | 5 | ||
| 脉冲持续时间 | TWH2 | 60 | ns | OE | 5 | ||
| 脉冲持续时间 | TWL2 | 30 | ns | OE | 5 | ||
| 时间建立 | TSU0 | 5 | ns | SDI, CLK↑ | 5 | ||
| 时间建立 | TSU1 | 12 | ns | LE↓- CLK↑ | 5 | ||
| 时间保持 | TH0 | 5 | ns | SDI, CLK↑ | 5 | ||
| 时间保持 | TH1 | 12 | ns | LE↓- CLK↑ | 5 | ||
| 低电平输出电压 | VOL | 0.4 | V | IOL=10mA:SDO | 6 | ||
| 输入电流 | IIN | -1 | 1 | uA | VIN=接 VCC 或者 GND SDI,CLK,LE,OE | 6 | |
| 电源电流(VCC) | ICC0 | 11 | 12 | mA | SDI/CLK/LE=0,OE=1 ,Riref=开路 | 6 | |
| 电源电流(VCC) | ICC1 | 12 | 13 | mA | SDI/CLK/LE=0,OE=1 ,Riref=1.2K | 6 | |
| 电源电流(VCC) | ICC2 | 15 | 16 | mA | OUT0~OUT15 开,SDI,CLK,LE,OE=0, Riref =470Ω | 6 | |
| 电源电流(VCC) | ICC3 | 13 | 14 | mA | OUT0~OUT15 开,SDI,CLK,LE,OE=0, Riref =1.2K | 6 | |
| 恒定输出电流 | IOLO | 36.3 | 37 | 37.7 | mA | OUT0~OUT15 开,VOUTn=1V=VOUTfix=1V,Riref=470Ω,VCC=5V,TA=25℃ | 6 |
| 输出漏电流 | LOLKG | 0.1 | uA | OUTn=OFF,VOUTn=VOUTfix=5.5V,OE=1,Riref=1.5K | 6 | ||
| 恒流误差(通道对通道) | ΔIOLC0 | -1.5 | 1 | 1.5 | % | OUT0~OUT15 开,VOUTn=1V=VOUTfix=1V,Riref=470Ω | 6 |
| 恒流误差(芯片对芯片) | ΔIOLC1 | -2 | 1.5 | 2 | % | OUT0 |
6 |
| 线性调整 | ΔIOLC2 | -1 | 0.5 | 1 | %/V | OUT0 |
6 |
| 负载调整 | ΔIOLC3 | -3 | 1 | 3 | %/V | OUT0 |
6 |
| 基准电压输出 | VIREF | 1.1 | 1.16 | 1.22 | V | Riref=470Ω,TA=25℃ | 6 |
| 上拉电阻 | RPUP | 32 | 40 | 48 | kΩ | OE | 6 |
| 下拉电阻 | RPDWN | 32 | 40 | 48 | kΩ | LE | 6 |
| 上升时间 | TR0 | 50 | 100 | nS | SDO | 7 | |
| 上升时间 | TR1 | 80 | 160 | nS | OUTn | 7 | |
| 下降时间 | TF0 | 50 | 100 | nS | SDO | 7 | |
| 下降时间 | TF1 | 80 | 160 | nS | OUTn | 7 | |
| 传输延迟时间 | TD0 | 60 | 120 | nS | CLK↑至 SDO↑↓ | 7 | |
| 传输延迟时间 | TD1 | 100 | 150 | nS | LE↑或 OE↑↓至 OUT0/OUT7/OUT8/OUT15 开/关 | 7 | |
| 传输延迟时间 | TD2 | 120 | 170 | nS | LE↑或 OE↑↓至 OUT1/OUT6/OUT9/OUT14 开/关 | 7 | |
| 传输延迟时间 | TD3 | 140 | 190 | nS | LE↑或 OE↑↓至 OUT2/OUT5/OUT10/OUT13 开/关 | 7 | |
| 传输延迟时间 | TD4 | 160 | 210 | nS | LE↑或 OE↑↓至 OUT3/OUT4/OUT11/OUT12 开/关 | 7 | |
| 输出误差时间 | TON_ERR | -50 | 50 | nS | 7 |
CAD (KiCad official)
- Symbol:
TM1818-SSOP24 - Footprint:
Package_SO:SSOP-24_5.3x8.2mm_P0.65mm - 3D model: SSOP-24 (KiCad packages3D, STEP)
- 3D model files:
tm1818-ssop24-etched.step/tm1818-ssop24-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);tm1818-ssop24.step/tm1818-ssop24.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: TM(Shenzhen Titan Micro Elec) datasheet (10 pp, sha256
c5f901cc7c57906a, retrieved 2026-10-28, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: KiCad official libraries (CC-BY-SA 4.0).