component
FM2119H
Public Made by Adomby adom
Shenzhen Fuman Battery Management ICs, SOT-23-6. Pinout cross-checked by two models against the datasheet, KiCad symbol/footprint/3D.
3D Model
Open in new tab ↗
Loads when you scroll to it. Unloads after 5 minutes in the background.
Symbol & Footprint
Schematic Symbol
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
PCB Footprint
Open full view ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Datasheet
Open in new tab ↗Loads when you scroll to it. Unloads after 5 minutes in the background.
Contents
README
markdownFM2119H
Shenzhen Fuman · Battery Management ICs · SOT-23-6
FM2119H from Shenzhen Fuman, in a SOT-23-6. Pinout and pin descriptions extracted from the manufacturer datasheet (extract_pins, cross-checked by a second model). Symbol and footprint from KiCad-official CAD; the 3D model is generated from the datasheet's package dimensions.
Pinout
| Pin | Name | Type | Function |
|---|---|---|---|
| 1 | DOUT | output | Discharge control output that drives the gate of the external discharge N-MOS Q2, going low to VSS to cut the discharge path during overvoltage discharge and overcurrent/short-circuit protection. |
| 2 | VM | input | Charge/discharge current sense input connected through a current-limiting resistor (typically 1 kΩ) to the source of charge N-MOS Q1, detecting the voltage drop across Q1 and Q2. |
| 3 | COUT | output | Charge control output that drives the gate of the external charge control N-MOS, switched low to the VM level to cut off the charge path during overvoltage charge protection. |
| 4 | NC | unconnected | Pin is left floating (悬空, not connected) and is not used by the device. |
| 5 | VDD | power_in | Positive supply input connected to the battery positive terminal, to be decoupled with a 0.1 uF ceramic capacitor; the datasheet specifies VDD operating range of 1.5 V to 10 V. |
| 6 | VSS | power_in | Ground (power supply negative) pin connected to the battery negative terminal, serving as the reference for all protection thresholds. |
Key specifications
| Parameter | Value |
|---|---|
| Manufacturer | Shenzhen Fuman |
| Package | SOT-23-6 |
| Category | Power Management ICs |
| Pins | 6 |
Electrical characteristics
Limits as printed in the datasheet (page.json metadata.characteristics carries them as data).
| Parameter | Symbol | Min | Typ | Max | Unit | Conditions | Page |
|---|---|---|---|---|---|---|---|
| Supply voltage VDD (operating range) | VDD | 1.5 | 10 | V | -40℃≤TA≤85℃ | 4 | |
| Overcharge protection delay TOC (tolerance) | TOC | -30 | 30 | % | VDD=3.6V, 4.4V | 4 | |
| Overdischarge protection threshold VOD (tolerance) | VOD | -0.075 | 2.4 | 0.075 | V | 4 | |
| Overdischarge protection threshold VOD (tolerance, -40℃≤TA≤85℃) | VOD | -0.105 | 2.4 | 0.105 | V | -40℃≤TA≤85℃ | 4 |
| Overdischarge recovery threshold VODR (tolerance) | VODR | -0.075 | 3 | 0.075 | V | 4 | |
| Overdischarge recovery threshold VODR (tolerance, -40℃≤TA≤85℃) | VODR | -0.105 | 3 | 0.105 | V | -40℃≤TA≤85℃ | 4 |
| Overdischarge protection delay TOD (tolerance) | TOD | -30 | 30 | % | VDD=3.6V, 2.4V | 4 | |
| Overcurrent discharge protection threshold VEDI (tolerance) | VEDI | -0.02 | 0.2 | 0.02 | V | 4 | |
| Overcurrent discharge protection delay TEDI (tolerance) | TEDI | -30 | 30 | % | 4 | ||
| Overcurrent discharge recovery delay TEDIR | TEDIR | 1.4 | 2 | 2.6 | ms | 4 | |
| Battery short-circuit protection threshold VSHORT | VSHORT | 0.82 | 1.36 | 1.75 | V | VM 端电压 | 4 |
| Battery short-circuit protection delay TSHORT | TSHORT | 200 | 400 | 600 | us | 4 | |
| Charger detection voltage VCHG | VCHG | -0.27 | -0.5 | -0.86 | V | VDD=3.0V | 4 |
| VM pull-up resistance to VDD RVMD | RVMD | 100 | 300 | 900 | kΩ | VDD=1.8V,VM=0V | 4 |
| VM pull-down resistance to VSS RVMS | RVMS | 15 | 30 | 45 | kΩ | 4 | |
| DOUT output-low level (VDD=2.0V) | DOUT | 0.2 | 0.4 | V | VDD=2.0V,IDOUT=10μA | 4 | |
| Supply current IDD | IDD | 2.5 | 6 | uA | VDD =3.9V | 4 | |
| Low-power mode quiescent current IPDWN | IPDWN | 0.8 | 1 | uA | VDD=2.0V | 5 | |
| Absolute max supply voltage VDD | VDD | -0.3 | 10 | V | 3 | ||
| Absolute max DOUT input voltage | -0.3 | V | 3 | ||||
| Operating temperature TA | TA | -40 | 85 | ℃ | 3 | ||
| Junction temperature | 150 | ℃ | 3 | ||||
| Storage temperature | -65 | 150 | ℃ | 3 | |||
| Soldering temperature (tin soldering, 10 s) | 260 | ℃ | 锡焊,10秒 | 3 | |||
| External resistor R2 recommended minimum | R2 | 500 | Ω | 9 | |||
| External resistor R2 recommended maximum | R2 | 2.2 | kΩ | 9 | |||
| External resistor R1 recommended maximum | R1 | 1 | kΩ | 9 | |||
| Overcharge protection delay TOC (typical) | TOC | 110 | ms | 3 | |||
| Overdischarge protection delay TOD (typical) | TOD | 55 | ms | 3 | |||
| Overcurrent discharge protection delay TEDI (typical) | TEDI | 7 | ms | 3 | |||
| COUT output-low pulldown resistance | 4 | MΩ | 4 | ||||
| 0V charge allow voltage threshold VOV_CHG | VOV_CHG | 1.2 | V | 充电器电压 | 5 | ||
| 0V charge inhibit threshold VOV_INH | VOV_INH | 1.2 | V | VM=-2.0V | 5 | ||
| External resistor R1 recommended value | R1 | 330 | Ω | 9 | |||
| Thermal resistance junction-to-ambient θJA | θJA | 200 | ℃/W | SOT23-6封装 | 3 |
CAD (land: KiCad; 3D: generated from the datasheet)
- Symbol:
FM2119H - Footprint:
Package_TO_SOT_SMD:SOT-23-6 - 3D model: SOT-23-6, generated on the KiCad land (body 1.6 x 2.92 mm, terminals on the pads, 1.45 mm tall, datasheet A, max). KiCad's stock model for this land is taller than the datasheet allows, so the model is generated from the datasheet drawing; the dimensions come from the datasheet drawing where it was read and are defaults otherwise (see provenance.model_3d_generated), not the manufacturer's CAD (STEP)
- 3D model files:
fm2119h-etched.step/fm2119h-etched.glbcarry the MPN laser-etched on the die in a toggleableAdom.LaserEtchgroup (Fusion-ready);fm2119h.step/fm2119h.glbare the bare package body.
Provenance
Data extracted from the manufacturer datasheet, not a distributor listing:
- Datasheet: Shenzhen Fuman datasheet (10 pp, sha256
8ca5b0c9916a6b29, retrieved 2026-11-13, tier: lcsc) - Datasheet language: Chinese. Pin names, descriptions, and specs on this page were extracted and translated to English by ds2sf; the linked PDF is the manufacturer original.
- Extractor: parts-factory
2.0.0/extract_pins 0.3, primaryclaude-haiku-5-5(text), consensusclaude-sonnet-5-5(agreed), guards: pin_guards 0.1: passed. Pins are checked against the footprint pad set and their cited datasheet pages before publish. - CAD: land: KiCad official libraries (CC-BY-SA 4.0); 3D: generated from the datasheet's package dimensions (provenance.model_3d_generated).